Net::BitTorrent versions through 2.0.1 for Perl generate the MSE Diffie-Hellman private key with a non-cryptographic PRNG. The MSE (Message Stream Encryption) handshake derives its 160-bit Diffie-Hellman private key from Perl's rand(), a non-cryptographic drand48-class generator seeded once per process, in KeyExchange.pm. The shared secret and the RC4 keys derived from it (the SHA-1 of "keyA" or "keyB", the shared secret, and the infohash) therefore depend entirely on a predictable PRNG. The same handshake sends, in cleartext, random padding drawn from the same rand() sequence in _random_pad, immediately after the public key and the private-key draw. A passive observer of the handshake recovers the PRNG state from the cleartext padding, reconstructs the private key, computes the shared secret from the peer's public key on the wire, derives the RC4 keys, and decrypts the connection, defeating the passive-observation obfuscation MSE provides.

Net::BitTorrent versions through 2.0.1 for Perl allow remote memory exhaustion via deeply nested bencoded input. bdecode recurses once per nested list or dictionary level with no depth cap, and each recursive call receives the remaining buffer by value while the list and dictionary branches capture the whole remainder, so every live recursion frame keeps its own copy of the shrinking buffer (O(N^2) bytes for an N-deep input). The decoder runs on every untrusted bencode source: .torrent files, BEP09 metadata fetched from peers, DHT messages, and tracker responses. A bencoded input of roughly 150,000 nested lists (about 150 KB on the wire) drives multi-gigabyte peak memory, so one short message from any peer, or one crafted .torrent file or magnet link, terminates the client.

Net::BitTorrent versions through 2.0.1 for Perl allow remote memory exhaustion via an uncapped peer-wire message-length prefix. The peer-wire framing in _process_messages trusts the 4-byte length prefix sent by a connected peer with no upper bound, while receive_data appends every inbound byte to the input buffer. A peer announces a length prefix of up to about 4 GiB and then streams bytes; the decoder waits until the buffer holds the full message before processing it, so the buffer grows without limit. Peer connections are unauthenticated, so any peer in the swarm exhausts the downloading process's memory. The largest legitimate message is a 16 KiB piece block, so any announced length far above that is anomalous.

Net::BitTorrent versions through 2.0.1 for Perl write files outside the download directory via path traversal in peer-supplied metadata. Net::BitTorrent validates file path components only on the .torrent-file ingest path. The peer and magnet metadata path (_on_metadata_received, reached from the BEP09 ut_metadata extension) passes attacker-supplied file names straight to Storage::add_file and Storage::_parse_file_tree, where Path::Tiny's child() does not collapse "..". A v2 file tree key, a v1 files[].path element, or a single-file name containing ".." segments therefore resolves outside the download directory. Because the peer also controls the piece hashes and the served bytes, content verification passes, so a malicious magnet or peer writes attacker-chosen content to an attacker-chosen path on the downloading host.

Redeight CMS version 1.0 uses the MD5 algorithm without a salt to store user passwords. Because MD5 is a cryptographically broken algorithm and lacks salting, attackers who obtain the password hashes can trivially reverse them using rainbow tables, leading to the exposure of plaintext credentials.

An Unrestricted File Upload vulnerability in Redeight CMS version 1.0 allows authenticated attackers to achieve Remote Code Execution via the POST "/admin/index.php?module=pages&mode=FileAdd" endpoint. The application fails to validate file extensions and MIME types, permitting the upload of arbitrary PHP scripts to the publicly accessible "/uploads/files/" directory where they can be executed directly by the web server.

An SQL Injection vulnerability exists in Redeight CMS version 1.0 via the "userEmail" parameter in the POST "/admin/index.php" login endpoint. The application fails to sanitize user input and directly interpolates it into SQL queries without using prepared statements, which allows unauthenticated remote attackers to execute arbitrary SQL commands and extract sensitive database information.

Incorrect authentication caching in the team member ship expansion of the Rancher Github authentication provider caused it granting principal access to any logged in user, in 2.13 before 2.13.6 and 2.14 before 2.14.2.

Hospital Queuing Management developed by Advantech has a Sensitive Data Exposure vulnerability, allowing unauthenticated remote attackers to access a specific URL to obtain API documentation.

Hospital Quening Management developed by Advantech has a Sensitive Data Exposure vulnerability, allowing unauthenticated remote attackers to access a specific URL to obtain API documentation.

DBIx::QuickORM versions before 0.000026 for Perl allow SQL injection via unquoted SQL identifiers. The default SQL builder, a SQL::Abstract subclass, sets bindtype in its constructor but never quote_char, so SQL::Abstract emits identifiers verbatim. Caller-supplied identifiers (order_by, where-clause column keys, field and returning lists, upsert columns, and join aliases) reach the SQL string raw, while values are placeholder-bound and unaffected. A caller that forwards untrusted input to an affected identifier position, such as a user-controlled order_by value, enables SQL injection: the row order can be made to depend on a sub-select over columns the query never selected, and the where and update identifier positions permit further data disclosure and tampering.

Missing Authorization vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ All, Apache ActiveMQ. Apache ActiveMQ Classic temporary destinations are expected to be isolated to the connection that created them. The isolation can be broken as this is only checked in the client, allowing a different connection to consume from another connection's temporary destination. This issue affects Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7, which fixes the issue.

Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Client, Apache ActiveMQ Broker. An authenticated user can cause a broker DoS by sending a crafted OpenWire Message with a large encoded size value for the map. OpenWire message property maps are unmarshaled without size validation which can trigger OOM and crash the broker. This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Client: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.

Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Stomp. An unauthenticated client that opens a STOMP NIO connection can send header bytes that never terminate which makes the broker buffer them without limit, exhausting the JVM heap. This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Stomp: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Apache ActiveMQ, Apache ActiveMQ Web Console. The browse page in the web console renders a message Id directly without sanitization. This allows an authenticated producer to send a message with a JMS message ID that has been crafted to contain HTML/JavaScript such that when an administrator browses the queue in the Web Console, the payload executes in their browser. This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Web Console: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.

Denial of Service via Out of Memory vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ, Apache ActiveMQ All. Following the fix for CVE-2026-49270 an unauthenticated attacker can now cause broker OOM by sending an repeated BrokerInfo commands without sending a ConnectionInfo, until the broker will crash with OOM. This issue affects Apache ActiveMQ Broker: from 5.19.7 before 5.19.8, from 6.2.6 before 6.2.7; Apache ActiveMQ: from 5.19.7 before 5.19.8, from 6.2.6 before 6.2.7; Apache ActiveMQ All: from 5.19.7 before 5.19.8, from 6.2.6 before 6.2.7. Users are recommended to upgrade to version 6.2.7, which fixes the issue.

Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ Client, Apache ActiveMQ, Apache ActiveMQ All. An unauthenticated network attacker can cause a broker DoS by sending a crafted WireFormatInfo frame with a malicious large size value. The value is not validate and causes the broker to attempt allocation during pre-auth negotiation which can trigger OOM and crash the broker. This issue affects Apache ActiveMQ Client: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.

Improper Authorization vulnerability in Apache ActiveMQ. An authenticated low-privilege Web Console user by default can access /admin/* paths in the Web Console. The default Jetty settings incorrectly did not limit those paths to only admins. This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.

Improper Input Validation vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ, Apache ActiveMQ All. An attacker that has access to publish or modify entries in LDAP that match the configured searchBase and searchFilter can instantiate denied transports inside the broker JVM. This can be used to fetch an attacker URL and spawn a second BrokerService inside the same JVM. This issue affects Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.

Improper Input Validation vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Stomp. A remote unauthenticated peer that can reach an exposed STOMP connector can trigger denial-of-service behavior by sending a negative content-length. For the NIO STOMP transport, an attacker can keep streaming body bytes and grow the per-connection command buffer beyond configured limits to cause OOM. For the blocking STOMP protocol, an error will instead force abnormal transport exception handling for the affected connection and closure. This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Stomp: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue.

A flaw has been found in foreman when HTTP parameters are modified in http_proxies_controller and http_proxy files. Attackers can perform an SSRF attack and steal cloud metadata service on AWS/GCP/Azure environment through foreman component.

The EventON - WordPress Virtual Event Calendar Plugin plugin for WordPress (full) is vulnerable to SQL Injection via the WordPress 'search' parameter in versions up to, and including, 5.0.11 due to insufficient escaping on the user supplied parameter and lack of preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database, granted the "Enable additional search queries" setting is enabled and at least one published event exists.

The Ajax Load More - Filters plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'taxonomy_include_children' parameter in all versions up to, and including, 3.4.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

Cross-Site Scripting (XSS) vulnerability in Intermark IT's WebControl CMS v3.5. This vulnerability allows an attacker to execute JavaScript code or inject a dynamic iframe into the victim’s browser by sending a malicious URL via the 'urlDestino' parameter in '/portal.do'. This vulnerability can be exploited to steal sensitive user data, such as session cookies, display phishing interfaces, or perform actions on the user’s behalf.

HTML injection vulnerability in Intermark IT's WebControl CMS v3.5. This vulnerability allows an attacker to send an email containing malicious HTML code to a victim via the contact form. To exploit this vulnerability, the attacker must send a request using the 'nombreApellidos', 'dirección ', and 'comentarios ' parameters to '/processContact.do'.