A Buffer Over-read vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). When an affected device receives a BGP update with a set of specific optional transitive attributes over an established peering session, rpd will crash and restart when attempting to advertise the received information to another peer. This issue can only happen if one or both of the BGP peers of the receiving session are non-4-byte-AS capable as determined from the advertised capabilities during BGP session establishment. Junos OS and Junos OS Evolved default behavior is 4-byte-AS capable unless this has been specifically disabled by configuring: [ protocols bgp ... disable-4byte-as ] Established BGP sessions can be checked by executing: show bgp neighbor <IP address> | match "4 byte AS" This issue affects: Junos OS:  * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S5, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S2, * 24.4 versions before 24.4R2; Junos OS Evolved:  * all versions before 22.4R3-S8-EVO, * 23.2 versions before 23.2R2-S5-EVO, * 23.4 versions before 23.4R2-S6-EVO, * 24.2 versions before 24.2R2-S2-EVO, * 24.4 versions before 24.4R2-EVO.

An Incorrect Permission Assignment for Critical Resource vulnerability in the Juniper DHCP daemon (jdhcpd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, low-privileged user to write to the Unix socket used to manage the jdhcpd process, resulting in complete control over the resource. This vulnerability allows any low-privileged user logged into the system to connect to the Unix socket and issue commands to manage the DHCP service, in essence, taking administrative control of the local DHCP server or DHCP relay. This issue affects: Junos OS: * all versions before 21.2R3-S10, * all versions of 22.2, * from 21.4 before 21.4R3-S12, * from 22.4 before 22.4R3-S8, * from 23.2 before 23.2R2-S5, * from 23.4 before 23.4R2-S6, * from 24.2 before 24.2R2-S2, * from 24.4 before 24.4R2, * from 25.2 before 25.2R1-S1, 25.2R2; Junos OS Evolved: * all versions before 22.4R3-S8-EVO, * from 23.2 before 23.2R2-S5-EVO, * from 23.4 before 23.4R2-S6-EVO, * from 24.2 before 24.2R2-S2-EVO, * from 24.4 before 24.4R2-EVO, * from 25.2 before 25.2R1-S1-EVO, 25.2R2-EVO.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the Juniper DHCP service (jdhcpd) of Juniper Networks Junos OS and Junos OS Evolved allows a DHCP client in one subnet to exhaust the address pools of other subnets, leading to a Denial of Service (DoS) on the downstream DHCP server. By default, the DHCP relay agent inserts its own Option 82 information when forwarding client requests, optionally replacing any Option 82 information provided by the client. When a specific DHCP DISCOVER is received in 'forward-only' mode with Option 82, the device should drop the message unless 'trust-option82' is configured. Instead, the DHCP relay forwards these packets to the DHCP server unmodified, which uses up addresses in the DHCP server's address pool, ultimately leading to address pool exhaustion. This issue affects Junos OS:  * all versions before 21.2R3-S10, * from 21.4 before 21.4R3-S12, * all versions of 22.2, * from 22.4 before 22.4R3-S8,  * from 23.2 before 23.2R2-S5,  * from 23.4 before 23.4R2-S6,  * from 24.2 before 24.2R2-S2,  * from 24.4 before 24.4R2,  * from 25.2 before 25.2R1-S1, 25.2R2. Junos OS Evolved: * all versions before 21.4R3-S12-EVO,  * all versions of 22.2-EVO, * from 22.4 before 22.4R3-S8-EVO,  * from 23.2 before 23.2R2-S5-EVO,  * from 23.4 before 23.4R2-S6-EVO,  * from 24.2 before 24.2R2-S2-EVO,  * from 24.4 before 24.4R2-EVO,  * from 25.2 before 25.2R1-S1-EVO, 25.2R2-EVO.

An Untrusted Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a local, authenticated attacker with low privileges to cause a Denial-of-Service (DoS). When the command 'show route < ( receive-protocol | advertising-protocol ) bgp > detail' is executed, and at least one of the routes in the intended output has specific attributes, this will cause an rpd crash and restart. 'show route ... extensive' is not affected. This issue affects: Junos OS:  * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S5, * 23.4 versions before 23.4R2-S5, * 24.2 versions before 24.2R2-S2, * 24.4 versions before 24.4R2; Junos OS Evolved: * all versions before 22.4R3-S8-EVO,  * 23.2 versions before 23.2R2-S5-EVO, * 23.4 versions before 23.4R2-S6-EVO, * 24.2 versions before 24.2R2-S2-EVO, * 24.4 versions before 24.4R2-EVO.

A clickjacking vulnerability exists in the web portal of Juniper Networks Paragon Automation (Pathfinder, Planner, Insights) due to the application's failure to set appropriate X-Frame-Options and X-Content-Type HTTP headers. This vulnerability allows an attacker to trick users into interacting with the interface under the attacker's control.  This issue affects all versions of Paragon Automation (Pathfinder, Planner, Insights) before 24.1.1.

Rejected reason: DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none.

Entrust Instant Financial Issuance (IFI) On Premise software (formerly referred to as CardWizard) versions 5.x, prior to 6.10.5, and prior to 6.11.1 contain an insecure .NET Remoting exposure in the SmartCardController service (DCG.SmartCardControllerService.exe). The service registers a TCP remoting channel with unsafe formatter/settings that permit untrusted remoting object invocation. A remote, unauthenticated attacker who can reach the remoting port can invoke exposed remoting objects to read arbitrary files from the server and coerce outbound authentication, and may achieve arbitrary file write and remote code execution via known .NET Remoting exploitation techniques. This can lead to disclosure of sensitive installation and service-account data and compromise of the affected host.

Easy!Appointments is a self hosted appointment scheduler. In 1.5.2 and earlier, application/core/EA_Security.php::csrf_verify() only enforces CSRF for POST requests and returns early for non-POST methods. Several application endpoints perform state-changing operations while accepting parameters from GET (or $_REQUEST), so an attacker can perform CSRF by forcing a victim's browser to issue a crafted GET request. Impact: creation of admin accounts, modification of admin email/password, and full admin account takeover.

H3 is a minimal H(TTP) framework built for high performance and portability. Prior to 1.15.5, there is a critical HTTP Request Smuggling vulnerability. readRawBody is doing a strict case-sensitive check for the Transfer-Encoding header. It explicitly looks for "chunked", but per the RFC, this header should be case-insensitive. This vulnerability is fixed in 1.15.5.

Arcane provides modern docker management. Prior to 1.13.0, Arcane has a command injection in the updater service. Arcane’s updater service supported lifecycle labels com.getarcaneapp.arcane.lifecycle.pre-update and com.getarcaneapp.arcane.lifecycle.post-update that allowed defining a command to run before or after a container update. The label value is passed directly to /bin/sh -c without sanitization or validation. Because any authenticated user (not limited to administrators) can create projects through the API, an attacker can create a project that specifies one of these lifecycle labels with a malicious command. When an administrator later triggers a container update (either manually or via scheduled update checks), Arcane reads the lifecycle label and executes its value as a shell command inside the container. This vulnerability is fixed in 1.13.0.

RustCrypto CMOV provides conditional move CPU intrinsics which are guaranteed on major platforms to execute in constant-time and not be rewritten as branches by the compiler. Prior to 0.4.4, the thumbv6m-none-eabi (Cortex M0, M0+ and M1) compiler emits non-constant time assembly when using cmovnz (portable version). This vulnerability is fixed in 0.4.4.

ZITADEL is an open source identity management platform. Prior to 4.9.1 and 3.4.6, a user enumeration vulnerability has been discovered in Zitadel's login interfaces. An unauthenticated attacker can exploit this flaw to confirm the existence of valid user accounts by iterating through usernames and userIDs. This vulnerability is fixed in 4.9.1 and 3.4.6.

A Stored Cross-Site Scripting (XSS) vulnerability in Web management interface in Each Italy Wireless Mini Router WIRELESS-N 300M v28K.MiniRouter.20190211 allows attackers to execute arbitrary scripts via a crafted payload due to unsanitized repeater AP SSID value when is displayed in any page at /index.htm.

An SSR XSS exists in async hydration when attacker‑controlled keys are passed to hydratable. The key is embedded inside a <script> block without HTML‑safe escaping, allowing </script> to terminate the script and inject arbitrary JavaScript. This enables remote script execution in users' browsers, with potential for session theft and account compromise. This issue affects Svelte: from 5.46.0 before 5.46.3.

An issue in nanomq v0.22.7 allows attackers to cause a Denial of Service (DoS) via a crafted request. The number of data packets received in the recv-q queue of the Nanomq process continues to increase, causing the nanomq broker to fall into a deadlock and be unable to provide normal services.

SvelteKit is a framework for rapidly developing robust, performant web applications using Svelte. From 2.49.0 to 2.49.4, the experimental form remote function uses a binary data format containing a representation of submitted form data. A specially-crafted payload can cause the server to allocate a large amount of memory, causing DoS via memory exhaustion. This vulnerability is fixed in 2.49.5.

Svelte devalue is a JavaScript library that serializes values into strings when JSON.stringify isn't sufficient for the job. From 5.1.0 to 5.6.1, certain inputs can cause devalue.parse to consume excessive CPU time and/or memory, potentially leading to denial of service in systems that parse input from untrusted sources. This affects applications using devalue.parse on externally-supplied data. The root cause is the ArrayBuffer hydration expecting base64 encoded strings as input, but not checking the assumption before decoding the input. This vulnerability is fixed in 5.6.2.

Svelte devalue is a JavaScript library that serializes values into strings when JSON.stringify isn't sufficient for the job. From 5.3.0 to 5.6.1, certain inputs can cause devalue.parse to consume excessive CPU time and/or memory, potentially leading to denial of service in systems that parse input from untrusted sources. This affects applications using devalue.parse on externally-supplied data. The root cause is the typed array hydration expecting an ArrayBuffer as input, but not checking the assumption before creating the typed array. This vulnerability is fixed in 5.6.2.

Docmost is an open-source collaborative wiki and documentation software. From 0.21.0 to before 0.24.0, Docmost is vulnerable to Arbitrary File Write via Zip Import Feature (ZipSlip). In apps/server/src/integrations/import/utils/file.utils.ts, there are no validation on filename. This vulnerability is fixed in 0.24.0.

A vulnerability in Palo Alto Networks PAN-OS software enables an unauthenticated attacker to cause a denial of service (DoS) to the firewall. Repeated attempts to trigger this issue results in the firewall entering into maintenance mode.

A heap overflow in the uncv_parse_config() function of GPAC v2.4.0 allows attackers to cause a Denial of Service (DoS) via a crafted MP4 file.

A heap overflow in the ghi_dmx_declare_opid_bin() function of GPAC v2.4.0 allows attackers to cause a Denial of Service (DoS) via a crafted input.

SvelteKit is a framework for rapidly developing robust, performant web applications using Svelte. Prior to 2.49.5, SvelteKit is vulnerable to a server side request forgery (SSRF) and denial of service (DoS) under certain conditions. From 2.44.0 through 2.49.4, the vulnerability results in a DoS when your app has at least one prerendered route (export const prerender = true). From 2.19.0 through 2.49.4, the vulnerability results in a DoS when your app has at least one prerendered route and you are using adapter-node without a configured ORIGIN environment variable, and you are not using a reverse proxy that implements Host header validation. This vulnerability is fixed in 2.49.5.

CWE-416: Use After Free vulnerability that could cause remote code execution when the end user imports the malicious project file (SSD file) into Rapsody.

CWE-415: Double Free vulnerability exists that could cause heap memory corruption when the end user imports a malicious project file (SSD file) shared by the attacker into Rapsody.