In the Linux kernel, the following vulnerability has been resolved: ata: pata_sl82c105: fix bridge revision use-after-free pci_get_slot() returns a referenced PCI device. Commit 44c10138fd4b ("PCI: Change all drivers to use pci_device->revision") replaced a configuration-space read with direct access to the cached revision field, but left that access after pci_dev_put(). The bridge may therefore be freed before its revision is read. Read the revision before dropping the reference.

In the Linux kernel, the following vulnerability has been resolved: net: remove CAP_SYS_RAWIO zero-padding in dev_validate_header dev_validate_header() reads dev->hard_header_len directly when zero-padding short link layer headers for CAP_SYS_RAWIO holders: if (capable(CAP_SYS_RAWIO)) { memset(ll_header + len, 0, dev->hard_header_len - len); return true; } Packet send paths call dev_validate_header() on skbs whose headroom was allocated from an earlier hard_header_len read. If the device is reconfigured so that dev->hard_header_len increases before validation, the memset writes past the reserved buffer, an out-of-bounds write. This out-of-bounds write is masked in some SOCK_RAW paths today because the same concurrent increase can first make skb_push() exceed the reserved headroom and trigger skb_under_panic(). Remove the zero-padding branch before making those hard_header_len reads consistent, so the snapshot fixes do not turn a loud panic into a silent overwrite. This path is only reached for variable length L2 protocols, where len < hard_header_len but len >= min_header_len. No remaining in-tree variable length L2 protocol implements header_ops->validate, and the CAP_SYS_RAWIO bypass that zero-pads and accepts short headers has no real value beyond allowing testing of intentionally malformed input. Drop the CAP_SYS_RAWIO branch. The remaining reads of dev->hard_header_len in dev_validate_header() are comparisons only and have no memory safety impact.

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix crash passing ERR_PTR to kthread_stop() In test_ringbuffer()'s out_free cleanup loop, the check `!rb_threads[cpu]` only catches NULL entries and misses entries that hold an ERR_PTR. rb_threads[] is static, so unassigned slots are NULL. But when kthread_run_on_cpu() fails for a cpu, it stores ERR_PTR(-ENOMEM) (or -EINTR) in rb_threads[cpu] before the creation loop jumps to out_free. That entry is non-NULL, so the old `!ptr` check does not break, and the cleanup proceeds to call kthread_stop() on the ERR_PTR. kthread_stop() then dereferences the bogus pointer, crashing the kernel during the late_initcall self-test. crash logs: BUG: kernel NULL pointer dereference, address: 000000000000001c Oops: 0002 [#1] SMP NOPTI CPU: 1 PID: 1 Comm: swapper/0 Not tainted 7.2.0-rc6-dirty #7 PREEMPT(lazy) RIP: 0010:kthread_stop+0x2e/0x220 RBX: fffffffffffffff4 CR2: 000000000000001c Call Trace: <TASK> test_ringbuffer+0x1ec/0x650 do_one_initcall+0x6c/0x2c0 kernel_init_freeable+0x21d/0x420 kernel_init+0x15/0x1c0 ret_from_fork+0x21b/0x320 </TASK> Kernel panic - not syncing: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: initialise workingset state before folio split xas_try_split() adds __GFP_ACCOUNT for page-cache xa_nodes, but __folio_split() leaves the xa_state's xa_lru unset. That lets a live, memcg-charged xa_node exist without being linked into the mapping's shadow_nodes list_lru; when reclaim later walks the list_lru it trips VM_WARN_ON(!css_is_dying()). Use mapping_set_update() to install both the workingset update callback and the shadow_nodes list_lru on the xa_state.

In the Linux kernel, the following vulnerability has been resolved: Revert "drm/amdgpu: fix aperture mapping leak" devres teardown is LIFO. The aperture devres node was registered after the DRM device node, so devres_release_all() unmaps the aperture before the DRM device release callback fires amdgpu_device_fini_sw(). IP sw_fini callbacks (e.g. vcn_v4_0_sw_fini) write to fw_shared through a pointer derived from aper_base_kaddr, causing a kernel page fault on probe failure / rollback: BUG: unable to handle page fault ... PMD 0 RIP: vcn_v4_0_sw_fini+0x7b/0x170 [amdgpu] Call Trace: amdgpu_device_fini_sw amdgpu_driver_release_kms devm_drm_dev_init_release devres_release_all This reverts commit d871e99879cb5fd1fa798b006b4888887e63a17a. (cherry picked from commit 336e0cd576817ac64a4b394ca2b3680029f3e37f)

In the Linux kernel, the following vulnerability has been resolved: x86/mce: Set up the polling timer before CMCI discovery I hit the following on one of my machines: mce: CPU0 BANK15 CMCI inherited storm ------------[ cut here ]------------ ODEBUG: assert_init not available (active state 0) object: (____ptrval____) object type: timer_list hint: 0x0 WARNING: lib/debugobjects.c:632 at debug_object_assert_init+0x178/0x230, CPU#0: swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc5 #3 PREEMPTLAZY RIP: 0010:debug_object_assert_init+0x18f/0x230 Call Trace: <TASK> __mod_timer mce_timer_kick cmci_discover intel_init_cmci mce_intel_feature_init mcheck_cpu_init identify_cpu identify_boot_cpu arch_cpu_finalize_init start_kernel A second splat follows right after, from timer_setup() finding that same timer already queued: ODEBUG: init active (active state 0) object: (____ptrval____) object type: timer_list hint: stub_timer+0x0/0x10 This is happening because CMCI storm detection is trying to modify the timer before latter was properly set up. Set up the timer first. __mcheck_cpu_setup_timer() only calls timer_setup(), and depends on neither the generic nor the vendor init. [ bp: Massage commit message. ]

In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: WARN and clear role.invalid when creating a child shadow page Explicitly clear role.invalid when deriving a child shadow page's role from its parent to harden against bugs elsewhere in KVM, as violating KVM's invariant that invalid pages are NOT on the list of active MMU pages leads to use-after-free due to __kvm_mmu_prepare_zap_page() using list_add() instead of list_move() when processing an invalid shadow page, i.e. makes a bad situation far worse. Yell loudly if the parent is invalid, as it means KVM has missed a validity check, i.e. KVM is attempting to map memory using an invalid/obsolete root, but continue on as the child is otherwise still a valid shadow page. ================================================================== BUG: KASAN: slab-use-after-free in __kvm_mmu_get_shadow_page+0x1817/0x1860 [kvm] Write of size 8 at addr ff11000153dd1368 by task repro/853 CPU: 1 UID: 1000 PID: 853 Comm: repro Not tainted 7.2.0-rc2-3aec122bdcaf-next-vm #5 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x4b/0x70 print_report+0x153/0x49c kasan_report+0xbc/0xf0 __kvm_mmu_get_shadow_page+0x1817/0x1860 [kvm] mmu_alloc_root+0x141/0x320 [kvm] kvm_mmu_load+0x612/0x20f0 [kvm] kvm_arch_vcpu_ioctl_run+0x3dd5/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> Allocated by task 853: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x5f/0x70 kmem_cache_alloc_noprof+0xfe/0x2e0 __kvm_mmu_topup_memory_cache+0x135/0x530 [kvm] paging64_page_fault+0x318/0x1e30 [kvm] kvm_mmu_do_page_fault+0x21d/0x630 [kvm] kvm_mmu_page_fault+0x18c/0x17b0 [kvm] kvm_arch_vcpu_ioctl_run+0x1f35/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 853: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kmem_cache_free+0xe2/0x400 kvm_mmu_commit_zap_page.part.0+0x1e2/0x310 [kvm] kvm_mmu_free_roots+0x283/0x560 [kvm] kvm_arch_vcpu_ioctl_run+0x33c8/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53

A vulnerability has been identified in Mendix SAML (Mendix 10 compatible) (All versions < V4.2.3), Mendix SAML (Mendix 11 compatible) (All versions < V4.2.3), Mendix SAML (Mendix 9.24 compatible) (All versions < V3.6.27). Affected versions of the module do not properly validate the SAML response signature. This could allow unauthenticated remote attackers to hijack an account (session) in specific SSO configurations.

Authorization bypass through user-controlled key issue exists in ShizenBox2 (edge-app). If exploited, an attacker who can log in to the product may change the other user's password.

An improper physical access control issue exists in ShizenBox2 (dev-conf). If exploited, an attacker with physical access to the product may execute bootloader commands without authentication.

Use of Weak Credentials vulnerability in B&R Industrial Automation GmbH mapp Audit used in mapp Services. This issue affects mapp Audit used in mapp Services: before 6.8.0.

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

Joomla Extension - feenders.de - Unauthenticated SQL injection in JooDatabase Lite < 5.1.0 - The cid parameter is used in queries without validation, allowing SQLi vectors.

Joomla Extension - j2commerce.com - Missing authorization on Apps controller delegation chain in J2Store 1.0.0-3.3.21, 4.0.0-4.0.21, 4.1.0-4.1.6 - `J2StoreControllerApps`'s `appTask` delegation path instantiates app-plugin controllers with no ACL check anywhere in the code. It currently returns 403 only as a side effect of `fof.xml`'s wildcard-deny resolving under the singularised ACL key `app`, which has no explicit allow rule — not because of any deliberate check. Behind that path, `applocalizationdata::getInstallerTool()` used a caller-influenced table name with no allow-list, both to select a `#__j2store_*` table for truncation and to build a path to SQL files it then executes — a path-traversal-capable file read/execute.

Joomla Extension - j2commerce.com - Guest checkout address disclosure to any authenticated user (IDOR) in J2Store 1.0.0-3.3.21, 4.0.0-4.0.21, 4.1.0-4.1.6 - `editAddress()` redirected non-owners away only when the loaded address row had a **non-empty** `user_id` belonging to someone else. Guest-checkout address rows have an empty `user_id`, so that check never triggered for them — any logged-in account guessing a small, sequential `address_id` got a guest customer's full name, street address, and phone number rendered prefilled into the edit form.

Joomla Extension - j2commerce.com - Anonymous cart-record tampering via inherited FOF `save` task in J2Store 1.0.0-3.3.21, 4.0.0-4.0.21, 4.1.0-4.1.6 - `fof.xml` grants the `carts` view's tasks a wildcard `true` ACL, and FOF only enforces CSRF tokens on back-end HTML requests, not on front-end `format=raw` requests. `J2StoreControllerCarts` already scoped `remove()` to the caller's own session, but never overrode the generic FOF `save` task, so it remained reachable to insert new cart rows with an attacker-chosen `user_id`/`session_id`, or overwrite an existing row by id.

Joomla Extension - j2commerce.com - Reflected XSS via `filter_tag`, `pricefrom` and `priceto` in J2Store 1.0.0-3.3.21, 4.0.0-4.0.21, 4.1.0-4.1.6 - Four task handlers accepted a base64-encoded URL from user input and redirected to it without validating the destination host, enabling phishing using the shop's trusted domain. No authentication required.

Joomla Extension - j2commerce.com - Unauthenticated PayPal callback forgery leading to order confirmation fraud in J2Store 1.0.0-3.3.21, 4.0.0-4.0.21, 4.1.0-4.1.6 - The PayPal IPN listener's signature check (`_validateIPN()`) accepted `UNVERIFIED` and any non-`INVALID` response as valid, made its verification request with `CURLOPT_SSL_VERIFYPEER` disabled, and stored its verdict in a field nothing downstream ever checked — so processing continued regardless of the outcome. Separately, the paid-amount comparison only ran when `mc_gross` was a positive number; omitting the field from the POST body (`floatval(null) == 0`) skipped the check entirely. Combined with a merchant-configured `receiver_email` and a sequential, enumerable order id read from the `custom` field, an anonymous POST was enough to move a pending order straight to `CONFIRMED` with no payment, or force another customer's pending order to `FAILED`. `paypalv2.php` performed no amount check under any circumstances.

util-linux versions through 2.41.5 and 2.42.2 fail to check mount helper exit status before running post-mount hooks, allowing unprivileged users to execute privileged operations on pre-existing filesystems. Attackers can exploit X-mount.idmap or X-mount.owner hooks to clone filesystems with inherited suid bits or modify target inode permissions after a helper fails, achieving privilege escalation.

A stored Cross-Site Scripting (XSS) vulnerability in the notification template functionality of the endpoint /ocsreports/?function=notification. A user with administrator privileges can input malicious HTML content which is subsequently stored and displayed without proper sanitisation when other administrators access the template customisation view, allowing JavaScript code to be executed within the application’s security context and potentially compromising the sessions of other users with administrative privileges.

Server-Side Request Forgery (SSRF) vulnerability in the /ocsreports/?function=tele_activate endpoint due to insufficient validation of the HTTPS_SERV and FILE_SERV parameters. An authenticated user with operator privileges can provide arbitrary values for these parameters, causing the OCS Inventory server to make HTTP/HTTPS requests to external systems or internal resources, which could allow access to internal network services or metadata resources of cloud services.

SQL injection vulnerability in the endpoint /ocsreports/index.php?function=admin_double due to improper processing of the values in the ID field included in the selected_grp_dupli[] parameter. An authenticated user with operator privileges can manipulate these values to alter the SQL queries executed by the application and retrieve information stored in the database.

SQL injection vulnerability in the del_check parameter of the /ocsreports/?function=save_query_list endpoint. Input provided by an authenticated user with operator privileges is incorporated into an SQL query without proper parameterisation or validation, allowing the query to be manipulated and information to be extracted from the database using SQL injection techniques.

Unrestricted file upload vulnerability in the CSV file upload functionality of the Ocsreports admin_info endpoint. The application validates files solely based on the name provided by the client, without properly checking their content or securely restricting the permitted file types. This allows a user with administrator privileges to upload PHP files to a directory accessible via the web interface. If the file is subsequently processed by the server, an attacker could execute arbitrary code with the privileges of the account used by the web service.

Dell PowerProtect Data Manager, versions 20.2.0.0 and below, contain an Incorrect Authorization vulnerability in the REST API. A low privileged remote attacker could potentially exploit this vulnerability, leading to Protection mechanism bypass.