In the Linux kernel, the following vulnerability has been resolved: dm cache policy smq: fix missing locks in invalidating cache blocks In passthrough mode, the policy invalidate_mapping operation is called simultaneously from multiple workers, thus it should be protected by a lock. Otherwise, we might end up with data races on the allocated blocks counter, or even use-after-free issues with internal data structures when doing concurrent writes. Note that the existing FIXME in smq_invalidate_mapping() doesn't affect passthrough mode since migration tasks don't exist there, but would need attention if supporting fast device shrinking via suspend/resume without target reloading. Reproduce steps: 1. Create a cache device consisting of 1024 cache entries dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 262144 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. Populate the cache, and record the number of cached blocks fio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \ --size=64m --direct=1 nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}') 3. Reload the cache into passthrough mode dmsetup suspend cache dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0" dmsetup resume cache 4. Write to the passthrough cache. By setting multiple jobs with I/O size equal to the cache block size, cache blocks are invalidated concurrently from different workers. fio --filename=/dev/mapper/cache --name=test --rw=randwrite --bs=64k \ --direct=1 --numjobs=2 --randrepeat=0 --size=64m 5. Check if demoted matches cached block count. These numbers should match but may differ due to the data race. nr_demoted=$(dmsetup status cache | awk '{print $12}') echo "$nr_cached, $nr_demoted"

In the Linux kernel, the following vulnerability has been resolved: dm cache: fix dirty mapping checking in passthrough mode switching As mentioned in commit 9b1cc9f251af ("dm cache: share cache-metadata object across inactive and active DM tables"), dm-cache assumed table reload occurs after suspension, while LVM's table preload breaks this assumption. The dirty mapping check for passthrough mode was designed around this assumption and is performed during table creation, causing the check to fail with preload while metadata updates are ongoing. This risks loading dirty mappings into passthrough mode, resulting in data loss. Reproduce steps: 1. Create a writeback cache with zero migration_threshold to produce dirty mappings dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 262144 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writeback smq \ 2 migration_threshold 0" 2. Preload a table in passthrough mode dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0" 3. Write to the first cache block to make it dirty fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \ --direct=1 --size=64k 4. Resume the inactive table. Now it's possible to load the dirty block into passthrough mode. dmsetup resume cache Fix by moving the checks to the preresume phase to support table preloading. Also remove the unused function dm_cache_metadata_all_clean.

In the Linux kernel, the following vulnerability has been resolved: dm cache metadata: fix memory leak on metadata abort retry When failing to acquire the root_lock in dm_cache_metadata_abort because the block_manager is read-only, the temporary block_manager created outside the root_lock is not properly released, causing a memory leak. Reproduce steps: This can be reproduced by reloading a new table while the metadata is read-only. While the second call to dm_cache_metadata_abort is caused by lack of support for table preload in dm-cache, mentioned in commit 9b1cc9f251af ("dm cache: share cache-metadata object across inactive and active DM tables"), it exposes the memory leak in dm_cache_metadata_abort when the function is called multiple times. Specifically, dm-cache fails to sync the new cache object's mode during preresume, creating the reproducer condition. This issue could also occur through concurrent metadata_operation_failed calls due to races in cache mode updates, but the table preload scenario below provides a reliable reproducer. 1. Create a cache device with some faulty trailing metadata blocks dmsetup create cmeta <<EOF 0 200 linear /dev/sdc 0 200 7992 error EOF dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 262144 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 131072 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 1 writethrough smq 0" 2. Suspend and resume the cache to start a new metadata transaction and trigger metadata io errors on the next metadata commit. dmsetup suspend cache dmsetup resume cache 3. Write to the cache device to update metadata fio --filename=/dev/mapper/cache --name test --rw=randwrite --bs=4k \ --randrepeat=0 --direct=1 --size 64k 4. Preload the same table dmsetup reload cache --table "$(dmsetup table cache)" 5. Resume the new table. This triggers the memory leak. dmsetup suspend cache dmsetup resume cache kmemleak logs: <snip> unreferenced object 0xffff8880080c2010 (size 16): comm "dmsetup", pid 132, jiffies 4294982580 hex dump (first 16 bytes): 00 38 b9 07 80 88 ff ff 6a 6b 6b 6b 6b 6b 6b a5 ... backtrace (crc 3118f31c): kmemleak_alloc+0x28/0x40 __kmalloc_cache_noprof+0x3d9/0x510 dm_block_manager_create+0x51/0x140 dm_cache_metadata_abort+0x85/0x320 metadata_operation_failed+0x103/0x1e0 cache_preresume+0xacd/0xe70 dm_table_resume_targets+0xd3/0x320 __dm_resume+0x1b/0xf0 dm_resume+0x127/0x170 <snip>

In the Linux kernel, the following vulnerability has been resolved: dm log: fix out-of-bounds write due to region_count overflow The local variable region_count in create_log_context() is declared as unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit). When a device-mapper target has a sufficiently large ti->len with a small region_size, the division result can exceed UINT_MAX. The truncated value is then used to calculate bitset_size, causing clean_bits, sync_bits, and recovering_bits to be allocated far smaller than needed for the actual number of regions. Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use region indices derived from the full untruncated region space, causing out-of-bounds writes to kernel heap memory allocated by vmalloc. This can be reproduced by creating a mirror target whose region_count overflows 32 bits: dmsetup create bigzero --table '0 8589934594 zero' dmsetup create mymirror --table '0 8589934594 mirror \ core 2 2 nosync 2 /dev/mapper/bigzero 0 \ /dev/mapper/bigzero 0' The status output confirms the truncation (sync_count=1 instead of 4294967297, because 0x100000001 was truncated to 1): $ dmsetup status mymirror 0 8589934594 mirror 2 254:1 254:1 1/4294967297 ... This leads to a kernel crash in core_in_sync: BUG: scheduling while atomic: (udev-worker)/9150/0x00000000 RIP: 0010:core_in_sync+0x14/0x30 [dm_log] CR2: 0000000000000008 Fixing recursive fault but reboot is needed! Fix by widening the local region_count to sector_t and adding an explicit overflow check before the value is assigned to lc->region_count.

In the Linux kernel, the following vulnerability has been resolved: drm/bridge: cadence: cdns-mhdp8546-core: Set the mhdp connector earlier in atomic_enable() In case if we get errors in cdns_mhdp_link_up() or cdns_mhdp_reg_read() in atomic_enable, we will go to cdns_mhdp_modeset_retry_fn() and will hit NULL pointer while trying to access the mutex. We need the connector to be set before that. Unlike in legacy cases with flag !DRM_BRIDGE_ATTACH_NO_CONNECTOR, we do not have connector initialised in bridge_attach(), so add the mhdp->connector_ptr in device structure to handle both cases with DRM_BRIDGE_ATTACH_NO_CONNECTOR and !DRM_BRIDGE_ATTACH_NO_CONNECTOR, set it in atomic_enable() earlier to avoid possible NULL pointer dereference in recovery paths like modeset_retry_fn() with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set.

In the Linux kernel, the following vulnerability has been resolved: iommu/riscv: Add IOTINVAL after updating DDT/PDT entries Add riscv_iommu_iodir_iotinval() to perform required TLB and context cache invalidations after updating DDT or PDT entries, as mandated by the RISC-V IOMMU specification (Section 6.3.1 and 6.3.2).

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: fix mismatch between power and frequency During DPU runtime suspend, calling dev_pm_opp_set_rate(dev, 0) drops the MMCX rail to MIN_SVS while the core clock frequency remains at its original (highest) rate. When runtime resume re-enables the clock, this may result in a mismatch between the rail voltage and the clock rate. For example, in the DPU bind path, the sequence could be: cpu0: dev_sync_state -> rpmhpd_sync_state cpu1: dpu_kms_hw_init timeline 0 ------------------------------------------------> t After rpmhpd_sync_state, the voltage performance is no longer guaranteed to stay at the highest level. During dpu_kms_hw_init, calling dev_pm_opp_set_rate(dev, 0) drops the voltage, causing the MMCX rail to fall to MIN_SVS while the core clock is still at its maximum frequency. When the power is re-enabled, only the clock is enabled, leading to a situation where the MMCX rail is at MIN_SVS but the core clock is at its highest rate. In this state, the rail cannot sustain the clock rate, which may cause instability or system crash. Remove the call to dev_pm_opp_set_rate(dev, 0) from dpu_runtime_suspend to ensure the correct vote is restored when DPU resumes. Patchwork: https://patchwork.freedesktop.org/patch/710077/

In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/sec2 - prevent req used-after-free for sec During packet transmission, if the system is under heavy load, the hardware might complete processing the packet and free the request memory (req) before the transmission function finishes. If the software subsequently accesses this req, a use-after-free error will occur. The qp_ctx memory exists throughout the packet sending process, so replace the req with the qp_ctx.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix VM_BIND UNMAP locking Wrong argument meant that the objs involved in UNMAP ops were not always getting locked. Since _NO_SHARE objs share a common resv with the VM (which is always locked) this would only show up with non-_NO_SHARE BOs. Patchwork: https://patchwork.freedesktop.org/patch/713898/

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix clone_alias() to use the original device's devid Currently clone_alias() assumes first argument (pdev) is always the original device pointer. This function is called by pci_for_each_dma_alias() which based on topology decides to send original or alias device details in first argument. This meant that the source devid used to look up and copy the DTE may be incorrect, leading to wrong or stale DTE entries being propagated to alias device. Fix this by passing the original pdev as the opaque data argument to both the direct clone_alias() call and pci_for_each_dma_alias(). Inside clone_alias(), retrieve the original device from data and compute devid from it.

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: qdsp6: topology: check widget type before accessing data Check widget type before accessing the private data, as this could a virtual widget which is no associated with a dsp graph, container and module. Accessing witout check could lead to incorrect memory access.

In the Linux kernel, the following vulnerability has been resolved: PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on When PERST# is deasserted twice (assert -> deassert -> assert -> deassert), a CBB (Control Backbone) timeout occurs at DBI register offset 0x8bc (PCIE_MISC_CONTROL_1_OFF). This happens because pci_epc_deinit_notify() and dw_pcie_ep_cleanup() are called before reset_control_deassert() powers on the controller core. The call chain that causes the timeout: pex_ep_event_pex_rst_deassert() pci_epc_deinit_notify() pci_epf_test_epc_deinit() pci_epf_test_clear_bar() pci_epc_clear_bar() dw_pcie_ep_clear_bar() __dw_pcie_ep_reset_bar() dw_pcie_dbi_ro_wr_en() <- Accesses 0x8bc DBI register reset_control_deassert(pcie->core_rst) <- Core powered on HERE The DBI registers, including PCIE_MISC_CONTROL_1_OFF (0x8bc), are only accessible after the controller core is powered on via reset_control_deassert(pcie->core_rst). Accessing them before this point results in a CBB timeout because the hardware is not yet operational. Fix this by moving pci_epc_deinit_notify() and dw_pcie_ep_cleanup() to after reset_control_deassert(pcie->core_rst), ensuring the controller is fully powered on before any DBI register accesses occur.

In the Linux kernel, the following vulnerability has been resolved: quota: Fix race of dquot_scan_active() with quota deactivation dquot_scan_active() can race with quota deactivation in quota_release_workfn() like: CPU0 (quota_release_workfn) CPU1 (dquot_scan_active) ============================== ============================== spin_lock(&dq_list_lock); list_replace_init( &releasing_dquots, &rls_head); /* dquot X on rls_head, dq_count == 0, DQ_ACTIVE_B still set */ spin_unlock(&dq_list_lock); synchronize_srcu(&dquot_srcu); spin_lock(&dq_list_lock); list_for_each_entry(dquot, &inuse_list, dq_inuse) { /* finds dquot X */ dquot_active(X) -> true atomic_inc(&X->dq_count); } spin_unlock(&dq_list_lock); spin_lock(&dq_list_lock); dquot = list_first_entry(&rls_head); WARN_ON_ONCE(atomic_read(&dquot->dq_count)); The problem is not only a cosmetic one as under memory pressure the caller of dquot_scan_active() can end up working on freed dquot. Fix the problem by making sure the dquot is removed from releasing list when we acquire a reference to it.

In the Linux kernel, the following vulnerability has been resolved: gfs2: add some missing log locking Function gfs2_logd() calls the log flushing functions gfs2_ail1_start(), gfs2_ail1_wait(), and gfs2_ail1_empty() without holding sdp->sd_log_flush_lock, but these functions require exclusion against concurrent transactions. To fix that, add a non-locking __gfs2_log_flush() function. Then, in gfs2_logd(), take sdp->sd_log_flush_lock before calling the above mentioned log flushing functions and __gfs2_log_flush().

In the Linux kernel, the following vulnerability has been resolved: gfs2: prevent NULL pointer dereference during unmount When flushing out outstanding glock work during an unmount, gfs2_log_flush() can be called when sdp->sd_jdesc has already been deallocated and sdp->sd_jdesc is NULL. Commit 35264909e9d1 ("gfs2: Fix NULL pointer dereference in gfs2_log_flush") added a check for that to gfs2_log_flush() itself, but it missed the sdp->sd_jdesc dereference in gfs2_log_release(). Fix that.

In the Linux kernel, the following vulnerability has been resolved: efi/capsule-loader: fix incorrect sizeof in phys array reallocation The krealloc() call for cap_info->phys in __efi_capsule_setup_info() uses sizeof(phys_addr_t *) instead of sizeof(phys_addr_t), which might be causing an undersized allocation. The allocation is also inconsistent with the initial array allocation in efi_capsule_open() that allocates one entry with sizeof(phys_addr_t), and the efi_capsule_write() function that stores phys_addr_t values (not pointers) via page_to_phys(). On 64-bit systems where sizeof(phys_addr_t) == sizeof(phys_addr_t *), this goes unnoticed. On 32-bit systems with PAE where phys_addr_t is 64-bit but pointers are 32-bit, this allocates half the required space, which might lead to a heap buffer overflow when storing physical addresses. This is similar to the bug fixed in commit fccfa646ef36 ("efi/capsule-loader: fix incorrect allocation size") which fixed the same issue at the initial allocation site.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free from async crypto on Qualcomm crypto engine ksmbd_crypt_message() sets a NULL completion callback on AEAD requests and does not handle the -EINPROGRESS return code from async hardware crypto engines like the Qualcomm Crypto Engine (QCE). When QCE returns -EINPROGRESS, ksmbd treats it as an error and immediately frees the request while the hardware DMA operation is still in flight. The DMA completion callback then dereferences freed memory, causing a NULL pointer crash: pc : qce_skcipher_done+0x24/0x174 lr : vchan_complete+0x230/0x27c ... el1h_64_irq+0x68/0x6c ksmbd_free_work_struct+0x20/0x118 [ksmbd] ksmbd_exit_file_cache+0x694/0xa4c [ksmbd] Use the standard crypto_wait_req() pattern with crypto_req_done() as the completion callback, matching the approach used by the SMB client in fs/smb/client/smb2ops.c. This properly handles both synchronous engines (immediate return) and async engines (-EINPROGRESS followed by callback notification).

In the Linux kernel, the following vulnerability has been resolved: memory: tegra124-emc: Fix dll_change check The code checking whether the specified memory timing enables DLL in the EMRS register was reversed. DLL is enabled if bit A0 is low. Fix the check.

In the Linux kernel, the following vulnerability has been resolved: soc/tegra: cbb: Fix incorrect ARRAY_SIZE in fabric lookup tables Fix incorrect ARRAY_SIZE usage in fabric lookup tables which could cause out-of-bounds access during target timeout lookup.

In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: validate qr_numregions in dlm_match_regions() Patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()". In dlm_match_regions(), the qr_numregions field from a DLM_QUERY_REGION network message is used to drive loops over the qr_regions buffer without sufficient validation. This series fixes two issues: - Patch 1 adds a bounds check to reject messages where qr_numregions exceeds O2NM_MAX_REGIONS. The o2net layer only validates message byte length; it does not constrain field values, so a crafted message can set qr_numregions up to 255 and trigger out-of-bounds reads past the 1024-byte qr_regions buffer. - Patch 2 fixes an off-by-one in the local-vs-remote comparison loop, which uses '<=' instead of '<', reading one entry past the valid range even when qr_numregions is within bounds. This patch (of 2): The qr_numregions field from a DLM_QUERY_REGION network message is used directly as loop bounds in dlm_match_regions() without checking against O2NM_MAX_REGIONS. Since qr_regions is sized for at most O2NM_MAX_REGIONS (32) entries, a crafted message with qr_numregions > 32 causes out-of-bounds reads past the qr_regions buffer. Add a bounds check for qr_numregions before entering the loops.

In the Linux kernel, the following vulnerability has been resolved: fwctl: Fix class init ordering to avoid NULL pointer dereference on device removal CXL is linked before fwctl in drivers/Makefile. Both use `module_init, so `cxl_pci_driver_init()` runs first. When `cxl_pci_probe()` calls `fwctl_register()` and then `device_add()`, fwctl_class is not yet registered because fwctl_init() hasn't run, causing `class_to_subsys()` to return NULL and skip knode_class initialization. On device removal, `class_to_subsys()` returns non-NULL, and `device_del()` calls `klist_del()` on the uninitialized knode, triggering a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix listxattr handling when the buffer is full [BUG] If an OCFS2 inode has both inline and block-based xattrs, listxattr() can return a size larger than the caller's buffer when the inline names consume that buffer exactly. kernel BUG at mm/usercopy.c:102! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:usercopy_abort+0xb7/0xd0 mm/usercopy.c:102 Call Trace: __check_heap_object+0xe3/0x120 mm/slub.c:8243 check_heap_object mm/usercopy.c:196 [inline] __check_object_size mm/usercopy.c:250 [inline] __check_object_size+0x5c5/0x780 mm/usercopy.c:215 check_object_size include/linux/ucopysize.h:22 [inline] check_copy_size include/linux/ucopysize.h:59 [inline] copy_to_user include/linux/uaccess.h:219 [inline] listxattr+0xb0/0x170 fs/xattr.c:926 filename_listxattr fs/xattr.c:958 [inline] path_listxattrat+0x137/0x320 fs/xattr.c:988 __do_sys_listxattr fs/xattr.c:1001 [inline] __se_sys_listxattr fs/xattr.c:998 [inline] __x64_sys_listxattr+0x7f/0xd0 fs/xattr.c:998 ... [CAUSE] Commit 936b8834366e ("ocfs2: Refactor xattr list and remove ocfs2_xattr_handler().") replaced the old per-handler list accounting with ocfs2_xattr_list_entry(), but it kept using size == 0 to detect probe mode. That assumption stops being true once ocfs2_listxattr() finishes the inline-xattr pass. If the inline names fill the caller buffer exactly, the block-xattr pass runs with a non-NULL buffer and a remaining size of zero. ocfs2_xattr_list_entry() then skips the bounds check, keeps counting block names, and returns a positive size larger than the supplied buffer. [FIX] Detect probe mode by testing whether the destination buffer pointer is NULL instead of whether the remaining size is zero. That restores the pre-refactor behavior and matches the OCFS2 getxattr helpers. Once the remaining buffer reaches zero while more names are left, the block-xattr pass now returns -ERANGE instead of reporting a size larger than the allocated list buffer.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate bg_bits during freefrag scan [BUG] A crafted filesystem can trigger an out-of-bounds bitmap walk when OCFS2_IOC_INFO is issued with OCFS2_INFO_FL_NON_COHERENT. BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline] BUG: KASAN: use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] BUG: KASAN: use-after-free in test_bit_le include/asm-generic/bitops/le.h:21 [inline] BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline] BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline] BUG: KASAN: use-after-free in ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline] BUG: KASAN: use-after-free in ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754 Read of size 8 at addr ffff888031bce000 by task syz.0.636/1435 Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbe/0x130 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xd1/0x650 mm/kasan/report.c:482 kasan_report+0xfb/0x140 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:186 [inline] kasan_check_range+0x11c/0x200 mm/kasan/generic.c:200 __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 instrument_atomic_read include/linux/instrumented.h:68 [inline] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] test_bit_le include/asm-generic/bitops/le.h:21 [inline] ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline] ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline] ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline] ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754 ocfs2_info_handle+0x18d/0x2a0 fs/ocfs2/ioctl.c:828 ocfs2_ioctl+0x632/0x6e0 fs/ocfs2/ioctl.c:913 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583 ... [CAUSE] ocfs2_info_freefrag_scan_chain() uses on-disk bg_bits directly as the bitmap scan limit. The coherent path reads group descriptors through ocfs2_read_group_descriptor(), which validates the descriptor before use. The non-coherent path uses ocfs2_read_blocks_sync() instead and skips that validation, so an impossible bg_bits value can drive the bitmap walk past the end of the block. [FIX] Compute the bitmap capacity from the filesystem format with ocfs2_group_bitmap_size(), report descriptors whose bg_bits exceeds that limit, and clamp the scan to the computed capacity. This keeps the freefrag report going while avoiding reads beyond the buffer.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate group add input before caching [BUG] OCFS2_IOC_GROUP_ADD can trigger a BUG_ON in ocfs2_set_new_buffer_uptodate(): kernel BUG at fs/ocfs2/uptodate.c:509! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_set_new_buffer_uptodate+0x194/0x1e0 fs/ocfs2/uptodate.c:509 Code: ffffe88f 42b9fe4c 89e64889 dfe8b4df Call Trace: ocfs2_group_add+0x3f1/0x1510 fs/ocfs2/resize.c:507 ocfs2_ioctl+0x309/0x6e0 fs/ocfs2/ioctl.c:887 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583 x64_sys_call+0x1144/0x26a0 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x93/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7bbfb55a966d [CAUSE] ocfs2_group_add() calls ocfs2_set_new_buffer_uptodate() on a user-controlled group block before ocfs2_verify_group_and_input() validates that block number. That helper is only valid for newly allocated metadata and asserts that the block is not already present in the chosen metadata cache. The code also uses INODE_CACHE(inode) even though the group descriptor belongs to main_bm_inode and later journal accesses use that cache context instead. [FIX] Validate the on-disk group descriptor before caching it, then add it to the metadata cache tracked by INODE_CACHE(main_bm_inode). Keep the validation failure path separate from the later cleanup path so we only remove the buffer from that cache after it has actually been inserted. This keeps the group buffer lifetime consistent across validation, journaling, and cleanup.

In the Linux kernel, the following vulnerability has been resolved: ima_fs: Correctly create securityfs files for unsupported hash algos ima_tpm_chip->allocated_banks[i].crypto_id is initialized to HASH_ALGO__LAST if the TPM algorithm is not supported. However there are places relying on the algorithm to be valid because it is accessed by hash_algo_name[]. On 6.12.40 I observe the following read out-of-bounds in hash_algo_name: ================================================================== BUG: KASAN: global-out-of-bounds in create_securityfs_measurement_lists+0x396/0x440 Read of size 8 at addr ffffffff83e18138 by task swapper/0/1 CPU: 4 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.40 #3 Call Trace: <TASK> dump_stack_lvl+0x61/0x90 print_report+0xc4/0x580 ? kasan_addr_to_slab+0x26/0x80 ? create_securityfs_measurement_lists+0x396/0x440 kasan_report+0xc2/0x100 ? create_securityfs_measurement_lists+0x396/0x440 create_securityfs_measurement_lists+0x396/0x440 ima_fs_init+0xa3/0x300 ima_init+0x7d/0xd0 init_ima+0x28/0x100 do_one_initcall+0xa6/0x3e0 kernel_init_freeable+0x455/0x740 kernel_init+0x24/0x1d0 ret_from_fork+0x38/0x80 ret_from_fork_asm+0x11/0x20 </TASK> The buggy address belongs to the variable: hash_algo_name+0xb8/0x420 Memory state around the buggy address: ffffffff83e18000: 00 01 f9 f9 f9 f9 f9 f9 00 01 f9 f9 f9 f9 f9 f9 ffffffff83e18080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffff83e18100: 00 00 00 00 00 00 00 f9 f9 f9 f9 f9 00 05 f9 f9 ^ ffffffff83e18180: f9 f9 f9 f9 00 00 00 00 00 00 00 04 f9 f9 f9 f9 ffffffff83e18200: 00 00 00 00 00 00 00 00 04 f9 f9 f9 f9 f9 f9 f9 ================================================================== Seems like the TPM chip supports sha3_256, which isn't yet in tpm_algorithms: tpm tpm0: TPM with unsupported bank algorithm 0x0027 That's TPM_ALG_SHA3_256 == 0x0027 from "Trusted Platform Module 2.0 Library Part 2: Structures", page 51 [1]. See also the related U-Boot algorithms update [2]. Thus solve the problem by creating a file name with "_tpm_alg_<ID>" postfix if the crypto algorithm isn't initialized. This is how it looks on the test machine (patch ported to v6.12 release): # ls -1 /sys/kernel/security/ima/ ascii_runtime_measurements ascii_runtime_measurements_tpm_alg_27 ascii_runtime_measurements_sha1 ascii_runtime_measurements_sha256 binary_runtime_measurements binary_runtime_measurements_tpm_alg_27 binary_runtime_measurements_sha1 binary_runtime_measurements_sha256 policy runtime_measurements_count violations [1]: https://trustedcomputinggroup.org/wp-content/uploads/Trusted-Platform-Module-2.0-Library-Part-2-Version-184_pub.pdf [2]: https://lists.denx.de/pipermail/u-boot/2024-July/558835.html