A TCP client can perform a TLS handshake and present the server name extension with a server name that is accepted by a server wildcard name, e.g. if the server is configured with a certificate accepting *.example.com, any XYZ.example.com where xyz is a valid name can be used.

FolderUploadsFileManager in Apache Wicket does not validate or sanitize the uploadFieldId parameter or the clientFileName before constructing file paths, allowing an unauthenticated attacker to write arbitrary files outside the intended upload directory or read files from arbitrary locations on the server. This issue affects Apache Wicket: from 8.0.0 through 8.17.0, from 9.0.0 through 9.22.0, from 10.0.0 through 10.8.0. Users are recommended to upgrade to version 10.9.0, which fixes the issue.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Wicket. This issue affects Apache Wicket: from 8.0.0 through 8.17.0, from 9.0.0 through 9.22.0, from 10.0.0 through 10.8.0. Users are recommended to upgrade to version 10.9.0, which fixes the issue.

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix double free related to rereg_user_mr If IB_MR_REREG_TRANS is set during rereg_user_mr, the umem will be released and a new one will be allocated in irdma_rereg_mr_trans. If any step of irdma_rereg_mr_trans fails after the new umem is allocated, it releases the umem, but does not set iwmr->region to NULL. The problem is that this failure is propagated to the user, who will then call ibv_dereg_mr (as they should). Then, the dereg_mr path will see a non-NULL umem and attempt to call ib_umem_release again. Fix this by setting iwmr->region to NULL after ib_umem_release. Fixed: 5ac388db27c4 ("RDMA/irdma: Add support to re-register a memory region")

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: annotate data-races around hdev->req_status __hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock: hdev->req_status = HCI_REQ_PEND; However, several other functions read or write hdev->req_status without holding any lock: - hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue) - hci_cmd_sync_complete() reads/writes from HCI event completion - hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write - hci_abort_conn() reads in connection abort path Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while hci_send_cmd_sync() runs on hdev->workqueue, these are different workqueues that can execute concurrently on different CPUs. The plain C accesses constitute a data race. Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses to hdev->req_status to prevent potential compiler optimizations that could affect correctness (e.g., load fusing in the wait_event condition or store reordering).

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix zero size inode with non-zero size after log replay When logging that an inode exists, as part of logging a new name or logging new dir entries for a directory, we always set the generation of the logged inode item to 0. This is to signal during log replay (in overwrite_item()), that we should not set the i_size since we only logged that an inode exists, so the i_size of the inode in the subvolume tree must be preserved (as when we log new names or that an inode exists, we don't log extents). This works fine except when we have already logged an inode in full mode or it's the first time we are logging an inode created in a past transaction, that inode has a new i_size of 0 and then we log a new name for the inode (due to a new hardlink or a rename), in which case we log an i_size of 0 for the inode and a generation of 0, which causes the log replay code to not update the inode's i_size to 0 (in overwrite_item()). An example scenario: mkdir /mnt/dir xfs_io -f -c "pwrite 0 64K" /mnt/dir/foo sync xfs_io -c "truncate 0" -c "fsync" /mnt/dir/foo ln /mnt/dir/foo /mnt/dir/bar xfs_io -c "fsync" /mnt/dir <power fail> After log replay the file remains with a size of 64K. This is because when we first log the inode, when we fsync file foo, we log its current i_size of 0, and then when we create a hard link we log again the inode in exists mode (LOG_INODE_EXISTS) but we set a generation of 0 for the inode item we add to the log tree, so during log replay overwrite_item() sees that the generation is 0 and i_size is 0 so we skip updating the inode's i_size from 64K to 0. Fix this by making sure at fill_inode_item() we always log the real generation of the inode if it was logged in the current transaction with the i_size we logged before. Also if an inode created in a previous transaction is logged in exists mode only, make sure we log the i_size stored in the inode item located from the commit root, so that if we log multiple times that the inode exists we get the correct i_size. A test case for fstests will follow soon.

In the Linux kernel, the following vulnerability has been resolved: btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file() If overlay is used on top of btrfs, dentry->d_sb translates to overlay's super block and fsid assignment will lead to a crash. Use file_inode(file)->i_sb to always get btrfs_sb.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: ensure safe access to master conntrack Holding reference on the expectation is not sufficient, the master conntrack object can just go away, making exp->master invalid. To access exp->master safely: - Grab the nf_conntrack_expect_lock, this gets serialized with clean_from_lists() which also holds this lock when the master conntrack goes away. - Hold reference on master conntrack via nf_conntrack_find_get(). Not so easy since the master tuple to look up for the master conntrack is not available in the existing problematic paths. This patch goes for extending the nf_conntrack_expect_lock section to address this issue for simplicity, in the cases that are described below this is just slightly extending the lock section. The add expectation command already holds a reference to the master conntrack from ctnetlink_create_expect(). However, the delete expectation command needs to grab the spinlock before looking up for the expectation. Expand the existing spinlock section to address this to cover the expectation lookup. Note that, the nf_ct_expect_iterate_net() calls already grabs the spinlock while iterating over the expectation table, which is correct. The get expectation command needs to grab the spinlock to ensure master conntrack does not go away. This also expands the existing spinlock section to cover the expectation lookup too. I needed to move the netlink skb allocation out of the spinlock to keep it GFP_KERNEL. For the expectation events, the IPEXP_DESTROY event is already delivered under the spinlock, just move the delivery of IPEXP_NEW under the spinlock too because the master conntrack event cache is reached through exp->master. While at it, add lockdep notations to help identify what codepaths need to grab the spinlock.

In the Linux kernel, the following vulnerability has been resolved: srcu: Use irq_work to start GP in tiny SRCU Tiny SRCU's srcu_gp_start_if_needed() directly calls schedule_work(), which acquires the workqueue pool->lock. This causes a lockdep splat when call_srcu() is called with a scheduler lock held, due to: call_srcu() [holding pi_lock] srcu_gp_start_if_needed() schedule_work() -> pool->lock workqueue_init() / create_worker() [holding pool->lock] wake_up_process() -> try_to_wake_up() -> pi_lock Also add irq_work_sync() to cleanup_srcu_struct() to prevent a use-after-free if a queued irq_work fires after cleanup begins. Tested with rcutorture SRCU-T and no lockdep warnings. [ Thanks to Boqun for similar fix in patch "rcu: Use an intermediate irq_work to start process_srcu()" ]

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry New test case fails unexpectedly when avx2 matching functions are used. The test first loads a ranomly generated pipapo set with 'ipv4 . port' key, i.e. nft -f foo. This works. Then, it reloads the set after a flush: (echo flush set t s; cat foo) | nft -f - This is expected to work, because its the same set after all and it was already loaded once. But with avx2, this fails: nft reports a clashing element. The reported clash is of following form: We successfully re-inserted a . b c . d Then we try to insert a . d avx2 finds the already existing a . d, which (due to 'flush set') is marked as invalid in the new generation. It skips the element and moves to next. Due to incorrect masking, the skip-step finds the next matching element *only considering the first field*, i.e. we return the already reinserted "a . b", even though the last field is different and the entry should not have been matched. No such error is reported for the generic c implementation (no avx2) or when the last field has to use the 'nft_pipapo_avx2_lookup_slow' fallback. Bisection points to 7711f4bb4b36 ("netfilter: nft_set_pipapo: fix range overlap detection") but that fix merely uncovers this bug. Before this commit, the wrong element is returned, but erronously reported as a full, identical duplicate. The root-cause is too early return in the avx2 match functions. When we process the last field, we should continue to process data until the entire input size has been consumed to make sure no stale bits remain in the map.

In the Linux kernel, the following vulnerability has been resolved: wifi: wl1251: validate packet IDs before indexing tx_frames wl1251_tx_packet_cb() uses the firmware completion ID directly to index the fixed 16-entry wl->tx_frames[] array. The ID is a raw u8 from the completion block, and the callback does not currently verify that it fits the array before dereferencing it. Reject completion IDs that fall outside wl->tx_frames[] and keep the existing NULL check in the same guard. This keeps the fix local to the trust boundary and avoids touching the rest of the completion flow.

In the Linux kernel, the following vulnerability has been resolved: fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath When cifs_sanitize_prepath is called with an empty string or a string containing only delimiters (e.g., "/"), the current logic attempts to check *(cursor2 - 1) before cursor2 has advanced. This results in an out-of-bounds read. This patch adds an early exit check after stripping prepended delimiters. If no path content remains, the function returns NULL. The bug was identified via manual audit and verified using a standalone test case compiled with AddressSanitizer, which triggered a SEGV on affected inputs.

In the Linux kernel, the following vulnerability has been resolved: HID: roccat: fix use-after-free in roccat_report_event roccat_report_event() iterates over the device->readers list without holding the readers_lock. This allows a concurrent roccat_release() to remove and free a reader while it's still being accessed, leading to a use-after-free. Protect the readers list traversal with the readers_lock mutex.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: validate bsscfg indices in IF events brcmf_fweh_handle_if_event() validates the firmware-provided interface index before it touches drvr->iflist[], but it still uses the raw bsscfgidx field as an array index without a matching range check. Reject IF events whose bsscfg index does not fit in drvr->iflist[] before indexing the interface array. [add missing wifi prefix]

In the Linux kernel, the following vulnerability has been resolved: x86: shadow stacks: proper error handling for mmap lock 김영민 reports that shstk_pop_sigframe() doesn't check for errors from mmap_read_lock_killable(), which is a silly oversight, and also shows that we haven't marked those functions with "__must_check", which would have immediately caught it. So let's fix both issues.

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pd-mapper: Fix element length in servreg_loc_pfr_req_ei It looks element length declared in servreg_loc_pfr_req_ei for reason not matching servreg_loc_pfr_req's reason field due which we could observe decoding error on PD crash. qmi_decode_string_elem: String len 81 >= Max Len 65 Fix this by matching with servreg_loc_pfr_req's reason field.

In the Linux kernel, the following vulnerability has been resolved: xfrm: account XFRMA_IF_ID in aevent size calculation xfrm_get_ae() allocates the reply skb with xfrm_aevent_msgsize(), then build_aevent() appends attributes including XFRMA_IF_ID when x->if_id is set. xfrm_aevent_msgsize() does not include space for XFRMA_IF_ID. For states with if_id, build_aevent() can fail with -EMSGSIZE and hit BUG_ON(err < 0) in xfrm_get_ae(), turning a malformed netlink interaction into a kernel panic. Account XFRMA_IF_ID in the size calculation unconditionally and replace the BUG_ON with normal error unwinding.

In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix incorrect dentry refcount in cachefiles_cull() The patch mentioned below changed cachefiles_bury_object() to expect 2 references to the 'rep' dentry. Three of the callers were changed to use start_removing_dentry() which takes an extra reference so in those cases the call gets the expected references. However there is another call to cachefiles_bury_object() in cachefiles_cull() which did not need to be changed to use start_removing_dentry() and so was not properly considered. It still passed the dentry with just one reference so the net result is that a reference is lost. To meet the expectations of cachefiles_bury_object(), cachefiles_cull() must take an extra reference before the call. It will be dropped by cachefiles_bury_object().

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Fix memory leak of BO array in hang state The hang state's BO array is allocated separately with kzalloc() in vc4_save_hang_state() but never freed in vc4_free_hang_state(). Add the missing kfree() for the BO array before freeing the hang state struct.

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Fix a memory leak in hang state error path When vc4_save_hang_state() encounters an early return condition, it returns without freeing the previously allocated `kernel_state`, leaking memory. Add the missing kfree() calls by consolidating the early return paths into a single place.

In the Linux kernel, the following vulnerability has been resolved: net: lapbether: handle NETDEV_PRE_TYPE_CHANGE lapbeth_data_transmit() expects the underlying device type to be ARPHRD_ETHER. Returning NOTIFY_BAD from lapbeth_device_event() makes sure bonding driver can not break this expectation.

In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix memory leak in airoha_qdma_rx_process() If an error occurs on the subsequents buffers belonging to the non-linear part of the skb (e.g. due to an error in the payload length reported by the NIC or if we consumed all the available fragments for the skb), the page_pool fragment will not be linked to the skb so it will not return to the pool in the airoha_qdma_rx_process() error path. Fix the memory leak partially reverting commit 'd6d2b0e1538d ("net: airoha: Fix page recycling in airoha_qdma_rx_process()")' and always running page_pool_put_full_page routine in the airoha_qdma_rx_process() error path.

In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: fix potential NULL dereferences in __ioam6_fill_trace_data() We need to check __in6_dev_get() for possible NULL value, as suggested by Yiming Qian. Also add skb_dst_dev_rcu() instead of skb_dst_dev(), and two missing READ_ONCE(). Note that @dev can't be NULL.

In the Linux kernel, the following vulnerability has been resolved: bridge: guard local VLAN-0 FDB helpers against NULL vlan group When CONFIG_BRIDGE_VLAN_FILTERING is not set, br_vlan_group() and nbp_vlan_group() return NULL (br_private.h stub definitions). The BR_BOOLOPT_FDB_LOCAL_VLAN_0 toggle code is compiled unconditionally and reaches br_fdb_delete_locals_per_vlan_port() and br_fdb_insert_locals_per_vlan_port(), where the NULL vlan group pointer is dereferenced via list_for_each_entry(v, &vg->vlan_list, vlist). The observed crash is in the delete path, triggered when creating a bridge with IFLA_BR_MULTI_BOOLOPT containing BR_BOOLOPT_FDB_LOCAL_VLAN_0 via RTM_NEWLINK. The insert helper has the same bug pattern. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000056: 0000 [#1] KASAN NOPTI KASAN: null-ptr-deref in range [0x00000000000002b0-0x00000000000002b7] RIP: 0010:br_fdb_delete_locals_per_vlan+0x2b9/0x310 Call Trace: br_fdb_toggle_local_vlan_0+0x452/0x4c0 br_toggle_fdb_local_vlan_0+0x31/0x80 net/bridge/br.c:276 br_boolopt_toggle net/bridge/br.c:313 br_boolopt_multi_toggle net/bridge/br.c:364 br_changelink net/bridge/br_netlink.c:1542 br_dev_newlink net/bridge/br_netlink.c:1575 Add NULL checks for the vlan group pointer in both helpers, returning early when there are no VLANs to iterate. This matches the existing pattern used by other bridge FDB functions such as br_fdb_add() and br_fdb_delete().

In the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: fix null-ptr-deref in icmp_build_probe() ipv6_stub->ipv6_dev_find() may return ERR_PTR(-EAFNOSUPPORT) when the IPv6 stack is not active (CONFIG_IPV6=m and not loaded), and passing this error pointer to dev_hold() will cause a kernel crash with null-ptr-deref. Instead, silently discard the request. RFC 8335 does not appear to define a specific response for the case where an IPv6 interface identifier is syntactically valid but the implementation cannot perform the lookup at runtime, and silently dropping the request may safer than misreporting "No Such Interface".