A malicious module proxy can exploit a flaw in the go command's validation of module checksums to bypass checksum database validation. This vulnerability affects any user using an untrusted module proxy (GOMODPROXY) or checksum database (GOSUMDB). A malicious module proxy can serve altered versions of the Go toolchain. When selecting a different version of the Go toolchain than the currently installed toolchain (due to the GOTOOLCHAIN environment variable, or a go.work or go.mod with a toolchain line), the go command will download and execute a toolchain provided by the module proxy. A malicious module proxy can bypass checksum database validation for this downloaded toolchain. Since this vulnerability affects the security of toolchain downloads, setting GOTOOLCHAIN to a fixed version is not sufficient. You must upgrade your base Go toolchain. The go tool always validates the hash of a toolchain before executing it, so fixed versions will refuse to execute any cached, altered versions of the toolchain. The go tool trusts go.sum files to contain accurate hashes of the current module's dependencies. A malicious proxy exploiting this vulnerability to serve an altered module will have caused an incorrect hash to be recorded in the go.sum. Users who have configured a non-trusted GOPROXY can determine if they have been affected by running "rm go.sum ; go mod tidy ; go mod verify", which will revalidate all dependencies of the current module. The specific flaw in more detail: The go command consults the checksum database to validate downloaded modules, when a module is not listed in the go.sum file. It verifies that the module hash reported by the checksum database matches the hash of the downloaded module. If, however, the checksum database returns a successful response that contains no entry for the module, the go command incorrectly permitted validation to succeed. A module proxy may mirror or proxy the checksum database, in which case the go command will not connect to the checksum database directly. Checksums reported by the checksum database are cryptographically signed, so a malicious proxy cannot alter the reported checksum for a module. However, a proxy which returns an empty checksum response, or a checksum response for an unrelated module, could cause the go command to proceed as if a downloaded module has been validated.

Pathological inputs could cause DoS through consumePhrase when parsing an email address according to RFC 5322.

Saltcorn is an extensible, open source, no-code database application builder. Prior to versions 1.4.6, 1.5.6, and 1.6.0-beta.5, Saltcorn validates the post-login dest parameter with a string check that only blocks :/ and //. Because all WHATWG-compliant browsers normalise backslashes (\) to forward slashes (/) for special schemes, a payload such as /\evil.com/path slips through is_relative_url(), is emitted unchanged in the HTTP Location header, and causes the browser to navigate cross-origin to an attacker-controlled domain. The bug is reachable on a default install and only requires a victim who can be tricked into logging in via a crafted Saltcorn URL. This issue has been patched in versions 1.4.6, 1.5.6, and 1.6.0-beta.5.

ParquetSharp is a .NET library for reading and writing Apache Parquet files. From version 18.1.0 to before version 23.0.0.1, DecimalConverter.ReadDecimal makes a stackalloc using what might be an attacker-supplied value. If an attacker declares a decimal column with some unreasonable width, this could lead to a stack overflow. In a service environment, this would potentially take down a service. This affects applications using ParquetSharp to read untrusted Parquet files in a network service. This issue has been patched in version 23.0.0.1.

Budibase is an open-source low-code platform. Prior to version 3.35.10, the budibase:auth cookie containing the JWT session token is set with httpOnly: false at packages/backend-core/src/utils/utils.ts:218. JavaScript can read this cookie via document.cookie. This means every XSS becomes a full account takeover — the attacker steals the JWT and has persistent access to the victim's account. The cookie also lacks secure: true (sent over plaintext HTTP) and sameSite attribute. This issue has been patched in version 3.35.10.

PJSIP is a free and open source multimedia communication library written in C. Prior to version 2.17, on GnuTLS builds, the SIP TLS transport (sip_transport_tls) can accept connections with invalid or untrusted certificates even when the application explicitly enables certificate verification via verify_server = PJ_TRUE or verify_client = PJ_TRUE. This issue has been patched in version 2.17.

The Dial and LookupPort functions panic on Windows when provided with an input containing a NUL (0).

If a trusted template author were to write a <script> tag containing an empty 'type' attribute or a 'type' attribute with an ASCII whitespace, the execution of the template would incorrectly escape any data passed into the <script> block.

ReverseProxy can forward queries containing parameters not visible to Rewrite functions. When used with a Rewrite function, or a Director function which parses query parameters, ReverseProxy sanitizes the forwarded request to remove query parameters which are not parsed by url.ParseQuery. ReverseProxy does not take ParseQuery's limit on the total number of query parameters (controlled by GODEBUG=urlmaxqueryparams=N) into account. This can permit ReverseProxy to forward a request containing a query parameter that is not visible to the Rewrite function. For example, the query "a1=x&a2=x&...&a10000=x&hidden=y" can forward the parameter "hidden=y" while hiding it from the proxy's Rewrite function.

CVE-2026-27142 fixed a vulnerability in which URLs were not correctly escaped inside of a <meta> tag's <content> attribute. If the URL content were to insert ASCII whitespaces around the '=' rune inside of the <content> attribute, the escaper would fail to similarly escape it, leading to XSS.

Well-crafted inputs reaching ParseAddress, ParseAddressList, and ParseDate were able to trigger excessive CPU exhaustion and memory allocations.

The "go bug" command writes to two files with predictable names in the system temporary directory (for example, "/tmp"). An attacker with access to the temporary directory can create a symlink in one of these names, causing "go bug" to overwrite the target of the symlink.

The "go tool pack" subcommand (usually used only by the compiler as an internal tool with known-good inputs) does not sanitize output filenames. Extracting a malicious archive file with the "pack" subcommand can write files to arbitrary locations on the filesystem.

When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0.

When using LookupCNAME with the cgo DNS resolver, a very long CNAME response can trigger a double-free of C memory and a crash.

A vulnerability was identified in OSGeo gdal up to 3.13.0dev-4. This issue affects the function SWnentries of the file frmts/hdf4/hdf-eos/SWapi.c. Such manipulation of the argument DimensionName leads to heap-based buffer overflow. The attack must be carried out locally. The exploit is publicly available and might be used. Upgrading to version 3.12.4RC1 is capable of addressing this issue. The name of the patch is 9491e794f1757f08063ea2f7a274ad2994afa636. It is advisable to upgrade the affected component.

A vulnerability was determined in OSGeo gdal up to 3.13.0dev-4. This vulnerability affects the function memmove of the file frmts/hdf4/hdf-eos/SWapi.c of the component HDF-EOS Grid File Handler. This manipulation causes out-of-bounds read. The attack is restricted to local execution. The exploit has been publicly disclosed and may be utilized. Upgrading to version 3.13.0RC1 is able to resolve this issue. Patch name: a791f70f8eaec540974ec989ca6fb00266b7646c. Upgrading the affected component is advised.

A vulnerability was found in SourceCodester Pharmacy Sales and Inventory System 1.0. This affects an unknown part of the file /ajax.php?action=save_user. The manipulation of the argument ID results in sql injection. The attack can be executed remotely. The exploit has been made public and could be used.

Postorius through 1.3.13 does not escape HTML in the message subject when rendering it in the Held messages pop-up, as exploited in the wild in May 2026.

GitPython is a python library used to interact with Git repositories. Prior to version 3.1.49, GitConfigParser.set_value() passes values to Python's configparser without validating for newlines. GitPython's own _write() converts embedded newlines into indented continuation lines (e.g. \n becomes \n\t), but Git still accepts an indented [core] stanza as a section header — so the injected core.hooksPath becomes effective configuration. Any Git operation that invokes hooks (commit, merge, checkout) will then execute scripts from the attacker-controlled path. This issue has been patched in version 3.1.49.

GitPython is a python library used to interact with Git repositories. Prior to version 3.1.48, a vulnerability in GitPython allows attackers who can supply a crafted reference path to an application using GitPython to write, overwrite, move, or delete files outside the repository’s .git directory via insufficient validation of reference paths in reference creation, rename, and delete operations. This issue has been patched in version 3.1.48.

GitPython is a python library used to interact with Git repositories. Prior to version 3.1.47, _clone() validates multi_options as the original list, then executes shlex.split(" ".join(multi_options)). A string like "--branch main --config core.hooksPath=/x" passes validation (starts with --branch), but after split becomes ["--branch", "main", "--config", "core.hooksPath=/x"]. Git applies the config and executes attacker hooks during clone. This issue has been patched in version 3.1.47.

GitPython is a python library used to interact with Git repositories. From version 3.1.30 to before version 3.1.47, GitPython blocks dangerous Git options such as --upload-pack and --receive-pack by default, but the equivalent Python kwargs upload_pack and receive_pack bypass that check. If an application passes attacker-controlled kwargs into Repo.clone_from(), Remote.fetch(), Remote.pull(), or Remote.push(), this leads to arbitrary command execution even when allow_unsafe_options is left at its default value of False. This issue has been patched in version 3.1.47.

Notepad Next is a cross-platform, reimplementation of Notepad++. Prior to version 0.14, NotepadNext's detectLanguageFromExtension() function interpolates a file's extension directly into a Lua script without sanitization. An attacker can craft a filename whose extension contains Lua code, which executes automatically when the victim opens the file in NotepadNext. Because luaL_openlibs() is called unconditionally, the full os, io, and package libraries are available to the injected code, enabling arbitrary command execution. This issue has been patched in version 0.14.

FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to version 1.8.214, the Change Customer modal correctly hides out-of-scope customers through the mailbox-filtered search endpoint, but the backend conversation_change_customer action accepts any supplied customer_email. A low-privileged agent can forge a request and bind a visible conversation to a hidden customer in another mailbox. This issue has been patched in version 1.8.214.