In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in smb_lazy_parent_lease_break_close() opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is being accessed after rcu_read_unlock() has been called. This creates a race condition where the memory could be freed by a concurrent writer between the unlock and the subsequent pointer dereferences (opinfo->is_lease, etc.), leading to a use-after-free.

In the Linux kernel, the following vulnerability has been resolved: smb: server: fix use-after-free in smb2_open() The opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is dereferenced after rcu_read_unlock(), creating a use-after-free window.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Don't log keys in SMB3 signing and encryption key generation When KSMBD_DEBUG_AUTH logging is enabled, generate_smb3signingkey() and generate_smb3encryptionkey() log the session, signing, encryption, and decryption key bytes. Remove the logs to avoid exposing credentials.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free by using call_rcu() for oplock_info ksmbd currently frees oplock_info immediately using kfree(), even though it is accessed under RCU read-side critical sections in places like opinfo_get() and proc_show_files(). Since there is no RCU grace period delay between nullifying the pointer and freeing the memory, a reader can still access oplock_info structure after it has been freed. This can leads to a use-after-free especially in opinfo_get() where atomic_inc_not_zero() is called on already freed memory. Fix this by switching to deferred freeing using call_rcu().

In the Linux kernel, the following vulnerability has been resolved: net: mctp: fix device leak on probe failure Driver core holds a reference to the USB interface and its parent USB device while the interface is bound to a driver and there is no need to take additional references unless the structures are needed after disconnect. This driver takes a reference to the USB device during probe but does not to release it on probe failures. Drop the redundant device reference to fix the leak, reduce cargo culting, make it easier to spot drivers where an extra reference is needed, and reduce the risk of further memory leaks.

In the Linux kernel, the following vulnerability has been resolved: net: nexthop: fix percpu use-after-free in remove_nh_grp_entry When removing a nexthop from a group, remove_nh_grp_entry() publishes the new group via rcu_assign_pointer() then immediately frees the removed entry's percpu stats with free_percpu(). However, the synchronize_net() grace period in the caller remove_nexthop_from_groups() runs after the free. RCU readers that entered before the publish still see the old group and can dereference the freed stats via nh_grp_entry_stats_inc() -> get_cpu_ptr(nhge->stats), causing a use-after-free on percpu memory. Fix by deferring the free_percpu() until after synchronize_net() in the caller. Removed entries are chained via nh_list onto a local deferred free list. After the grace period completes and all RCU readers have finished, the percpu stats are safely freed.

In the Linux kernel, the following vulnerability has been resolved: net: ncsi: fix skb leak in error paths Early return paths in NCSI RX and AEN handlers fail to release the received skb, resulting in a memory leak. Specifically, ncsi_aen_handler() returns on invalid AEN packets without consuming the skb. Similarly, ncsi_rcv_rsp() exits early when failing to resolve the NCSI device, response handler, or request, leaving the skb unfreed.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: microchip: Fix error path in PTP IRQ setup If request_threaded_irq() fails during the PTP message IRQ setup, the newly created IRQ mapping is never disposed. Indeed, the ksz_ptp_irq_setup()'s error path only frees the mappings that were successfully set up. Dispose the newly created mapping if the associated request_threaded_irq() fails at setup.

In the Linux kernel, the following vulnerability has been resolved: net: macb: Shuffle the tx ring before enabling tx Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board, the rootfs may take an extended time to recover after a suspend. Upon investigation, it was determined that the issue originates from a problem in the macb driver. According to the Zynq UltraScale TRM [1], when transmit is disabled, the transmit buffer queue pointer resets to point to the address specified by the transmit buffer queue base address register. In the current implementation, the code merely resets `queue->tx_head` and `queue->tx_tail` to '0'. This approach presents several issues: - Packets already queued in the tx ring are silently lost, leading to memory leaks since the associated skbs cannot be released. - Concurrent write access to `queue->tx_head` and `queue->tx_tail` may occur from `macb_tx_poll()` or `macb_start_xmit()` when these values are reset to '0'. - The transmission may become stuck on a packet that has already been sent out, with its 'TX_USED' bit set, but has not yet been processed. However, due to the manipulation of 'queue->tx_head' and 'queue->tx_tail', `macb_tx_poll()` incorrectly assumes there are no packets to handle because `queue->tx_head == queue->tx_tail`. This issue is only resolved when a new packet is placed at this position. This is the root cause of the prolonged recovery time observed for the NFS root filesystem. To resolve this issue, shuffle the tx ring and tx skb array so that the first unsent packet is positioned at the start of the tx ring. Additionally, ensure that updates to `queue->tx_head` and `queue->tx_tail` are properly protected with the appropriate lock. [1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix use-after-free race in VM acquire Replace non-atomic vm->process_info assignment with cmpxchg() to prevent race when parent/child processes sharing a drm_file both try to acquire the same VM after fork(). (cherry picked from commit c7c573275ec20db05be769288a3e3bb2250ec618)

In the Linux kernel, the following vulnerability has been resolved: drm/amd: Fix NULL pointer dereference in device cleanup When GPU initialization fails due to an unsupported HW block IP blocks may have a NULL version pointer. During cleanup in amdgpu_device_fini_hw, the code calls amdgpu_device_set_pg_state and amdgpu_device_set_cg_state which iterate over all IP blocks and access adev->ip_blocks[i].version without NULL checks, leading to a kernel NULL pointer dereference. Add NULL checks for adev->ip_blocks[i].version in both amdgpu_device_set_cg_state and amdgpu_device_set_pg_state to prevent dereferencing NULL pointers during GPU teardown when initialization has failed. (cherry picked from commit b7ac77468cda92eecae560b05f62f997a12fe2f2)

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential overflow of shmem scatterlist length When a scatterlists table of a GEM shmem object of size 4 GB or more is populated with pages allocated from a folio, unsigned int .length attribute of a scatterlist may get overflowed if total byte length of pages allocated to that single scatterlist happens to reach or cross the 4GB limit. As a consequence, users of the object may suffer from hitting unexpected, premature end of the object's backing pages. [278.780187] ------------[ cut here ]------------ [278.780377] WARNING: CPU: 1 PID: 2326 at drivers/gpu/drm/i915/i915_mm.c:55 remap_sg+0x199/0x1d0 [i915] ... [278.780654] CPU: 1 UID: 0 PID: 2326 Comm: gem_mmap_offset Tainted: G S U 6.17.0-rc1-CI_DRM_16981-ged823aaa0607+ #1 PREEMPT(voluntary) [278.780656] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER [278.780658] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 [278.780659] RIP: 0010:remap_sg+0x199/0x1d0 [i915] ... [278.780786] Call Trace: [278.780787] <TASK> [278.780788] ? __apply_to_page_range+0x3e6/0x910 [278.780795] ? __pfx_remap_sg+0x10/0x10 [i915] [278.780906] apply_to_page_range+0x14/0x30 [278.780908] remap_io_sg+0x14d/0x260 [i915] [278.781013] vm_fault_cpu+0xd2/0x330 [i915] [278.781137] __do_fault+0x3a/0x1b0 [278.781140] do_fault+0x322/0x640 [278.781143] __handle_mm_fault+0x938/0xfd0 [278.781150] handle_mm_fault+0x12c/0x300 [278.781152] ? lock_mm_and_find_vma+0x4b/0x760 [278.781155] do_user_addr_fault+0x2d6/0x8e0 [278.781160] exc_page_fault+0x96/0x2c0 [278.781165] asm_exc_page_fault+0x27/0x30 ... That issue was apprehended by the author of a change that introduced it, and potential risk even annotated with a comment, but then never addressed. When adding folio pages to a scatterlist table, take care of byte length of any single scatterlist not exceeding max_segment. (cherry picked from commit 06249b4e691a75694c014a61708c007fb5755f60)

In the Linux kernel, the following vulnerability has been resolved: drm/amd: Fix a few more NULL pointer dereference in device cleanup I found a few more paths that cleanup fails due to a NULL version pointer on unsupported hardware. Add NULL checks as applicable. (cherry picked from commit f5a05f8414fc10f307eb965f303580c7778f8dd2)

In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: check if target buffer list is still legacy on recycle There's a gap between when the buffer was grabbed and when it potentially gets recycled, where if the list is empty, someone could've upgraded it to a ring provided type. This can happen if the request is forced via io-wq. The legacy recycling is missing checking if the buffer_list still exists, and if it's of the correct type. Add those checks.

In the Linux kernel, the following vulnerability has been resolved: xfs: fix undersized l_iclog_roundoff values If the superblock doesn't list a log stripe unit, we set the incore log roundoff value to 512. This leads to corrupt logs and unmountable filesystems in generic/617 on a disk with 4k physical sectors... XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c XFS (sda1): Torn write (CRC failure) detected at log block 0x318e. Truncating head block from 0x3197. XFS (sda1): failed to locate log tail XFS (sda1): log mount/recovery failed: error -74 XFS (sda1): log mount failed XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c XFS (sda1): Ending clean mount ...on the current xfsprogs for-next which has a broken mkfs. xfs_info shows this... meta-data=/dev/sda1 isize=512 agcount=4, agsize=644992 blks = sectsz=4096 attr=2, projid32bit=1 = crc=1 finobt=1, sparse=1, rmapbt=1 = reflink=1 bigtime=1 inobtcount=1 nrext64=1 = exchange=1 metadir=1 data = bsize=4096 blocks=2579968, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0, ftype=1, parent=1 log =internal log bsize=4096 blocks=16384, version=2 = sectsz=4096 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 = rgcount=0 rgsize=268435456 extents = zoned=0 start=0 reserved=0 ...observe that the log section has sectsz=4096 sunit=0, which means that the roundoff factor is 512, not 4096 as you'd expect. We should fix mkfs not to generate broken filesystems, but anyone can fuzz the ondisk superblock so we should be more cautious. I think the inadequate logic predates commit a6a65fef5ef8d0, but that's clearly going to require a different backport.

In the Linux kernel, the following vulnerability has been resolved: ublk: fix NULL pointer dereference in ublk_ctrl_set_size() ublk_ctrl_set_size() unconditionally dereferences ub->ub_disk via set_capacity_and_notify() without checking if it is NULL. ub->ub_disk is NULL before UBLK_CMD_START_DEV completes (it is only assigned in ublk_ctrl_start_dev()) and after UBLK_CMD_STOP_DEV runs (ublk_detach_disk() sets it to NULL). Since the UBLK_CMD_UPDATE_SIZE handler performs no state validation, a user can trigger a NULL pointer dereference by sending UPDATE_SIZE to a device that has been added but not yet started, or one that has been stopped. Fix this by checking ub->ub_disk under ub->mutex before dereferencing it, and returning -ENODEV if the disk is not available.

In the Linux kernel, the following vulnerability has been resolved: x86/apic: Disable x2apic on resume if the kernel expects so When resuming from s2ram, firmware may re-enable x2apic mode, which may have been disabled by the kernel during boot either because it doesn't support IRQ remapping or for other reasons. This causes the kernel to continue using the xapic interface, while the hardware is in x2apic mode, which causes hangs. This happens on defconfig + bare metal + s2ram. Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be disabled, i.e. when x2apic_mode = 0. The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the pre-sleep configuration or initial boot configuration for each CPU, including MSR state: When executing from the power-on reset vector as a result of waking from an S2 or S3 sleep state, the platform firmware performs only the hardware initialization required to restore the system to either the state the platform was in prior to the initial operating system boot, or to the pre-sleep configuration state. In multiprocessor systems, non-boot processors should be placed in the same state as prior to the initial operating system boot. (further ahead) If this is an S2 or S3 wake, then the platform runtime firmware restores minimum context of the system before jumping to the waking vector. This includes: CPU configuration. Platform runtime firmware restores the pre-sleep configuration or initial boot configuration of each CPU (MSR, MTRR, firmware update, SMBase, and so on). Interrupts must be disabled (for IA-32 processors, disabled by CLI instruction). (and other things) So at least as per the spec, re-enablement of x2apic by the firmware is allowed if "x2apic on" is a part of the initial boot configuration. [1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization [ bp: Massage. ]

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix in-place encryption corruption in SMB2_write() SMB2_write() places write payload in iov[1..n] as part of rq_iov. smb3_init_transform_rq() pointer-shares rq_iov, so crypt_message() encrypts iov[1] in-place, replacing the original plaintext with ciphertext. On a replayable error, the retry sends the same iov[1] which now contains ciphertext instead of the original data, resulting in corruption. The corruption is most likely to be observed when connections are unstable, as reconnects trigger write retries that re-send the already-encrypted data. This affects SFU mknod, MF symlinks, etc. On kernels before 6.10 (prior to the netfs conversion), sync writes also used this path and were similarly affected. The async write path wasn't unaffected as it uses rq_iter which gets deep-copied. Fix by moving the write payload into rq_iter via iov_iter_kvec(), so smb3_init_transform_rq() deep-copies it before encryption.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction abort when snapshotting received subvolumes Currently a user can trigger a transaction abort by snapshotting a previously received snapshot a bunch of times until we reach a BTRFS_UUID_KEY_RECEIVED_SUBVOL item overflow (the maximum item size we can store in a leaf). This is very likely not common in practice, but if it happens, it turns the filesystem into RO mode. The snapshot, send and set_received_subvol and subvol_setflags (used by receive) don't require CAP_SYS_ADMIN, just inode_owner_or_capable(). A malicious user could use this to turn a filesystem into RO mode and disrupt a system. Reproducer script: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi # Use smallest node size to make the test faster. mkfs.btrfs -f --nodesize 4K $DEV mount $DEV $MNT # Create a subvolume and set it to RO so that it can be used for send. btrfs subvolume create $MNT/sv touch $MNT/sv/foo btrfs property set $MNT/sv ro true # Send and receive the subvolume into snaps/sv. mkdir $MNT/snaps btrfs send $MNT/sv | btrfs receive $MNT/snaps # Now snapshot the received subvolume, which has a received_uuid, a # lot of times to trigger the leaf overflow. total=500 for ((i = 1; i <= $total; i++)); do echo -ne "\rCreating snapshot $i/$total" btrfs subvolume snapshot -r $MNT/snaps/sv $MNT/snaps/sv_$i > /dev/null done echo umount $MNT When running the test: $ ./test.sh (...) Create subvolume '/mnt/sdi/sv' At subvol /mnt/sdi/sv At subvol sv Creating snapshot 496/500ERROR: Could not create subvolume: Value too large for defined data type Creating snapshot 497/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 498/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 499/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 500/500ERROR: Could not create subvolume: Read-only file system And in dmesg/syslog: $ dmesg (...) [251067.627338] BTRFS warning (device sdi): insert uuid item failed -75 (0x4628b21c4ac8d898, 0x2598bee2b1515c91) type 252! [251067.629212] ------------[ cut here ]------------ [251067.630033] BTRFS: Transaction aborted (error -75) [251067.630871] WARNING: fs/btrfs/transaction.c:1907 at create_pending_snapshot.cold+0x52/0x465 [btrfs], CPU#10: btrfs/615235 [251067.632851] Modules linked in: btrfs dm_zero (...) [251067.644071] CPU: 10 UID: 0 PID: 615235 Comm: btrfs Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full) [251067.646165] Tainted: [W]=WARN [251067.646733] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [251067.648735] RIP: 0010:create_pending_snapshot.cold+0x55/0x465 [btrfs] [251067.649984] Code: f0 48 0f (...) [251067.653313] RSP: 0018:ffffce644908fae8 EFLAGS: 00010292 [251067.653987] RAX: 00000000ffffff01 RBX: ffff8e5639e63a80 RCX: 00000000ffffffd3 [251067.655042] RDX: ffff8e53faa76b00 RSI: 00000000ffffffb5 RDI: ffffffffc0919750 [251067.656077] RBP: ffffce644908fbd8 R08: 0000000000000000 R09: ffffce644908f820 [251067.657068] R10: ffff8e5adc1fffa8 R11: 0000000000000003 R12: ffff8e53c0431bd0 [251067.658050] R13: ffff8e5414593600 R14: ffff8e55efafd000 R15: 00000000ffffffb5 [251067.659019] FS: 00007f2a4944b3c0(0000) GS:ffff8e5b27dae000(0000) knlGS:0000000000000000 [251067.660115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [251067.660943] CR2: 00007ffc5aa57898 CR3: 00000005813a2003 CR4: 0000000000370ef0 [251067.661972] Call Trace: [251067.662292] <TASK> [251067.662653] create_pending_snapshots+0x97/0xc0 [btrfs] [251067.663413] btrfs_commit_transaction+0x26e/0xc00 [btrfs] [251067.664257] ? btrfs_qgroup_convert_reserved_meta+0x35/0x390 [btrfs] [251067.665238] ? _raw_spin_unlock+0x15/0x30 [251067.665837] ? record_root_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction abort on file creation due to name hash collision If we attempt to create several files with names that result in the same hash, we have to pack them in same dir item and that has a limit inherent to the leaf size. However if we reach that limit, we trigger a transaction abort and turns the filesystem into RO mode. This allows for a malicious user to disrupt a system, without the need to have administration privileges/capabilities. Reproducer: $ cat exploit-hash-collisions.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi # Use smallest node size to make the test faster and require fewer file # names that result in hash collision. mkfs.btrfs -f --nodesize 4K $DEV mount $DEV $MNT # List of names that result in the same crc32c hash for btrfs. declare -a names=( 'foobar' '%a8tYkxfGMLWRGr55QSeQc4PBNH9PCLIvR6jZnkDtUUru1t@RouaUe_L:@xGkbO3nCwvLNYeK9vhE628gss:T$yZjZ5l-Nbd6CbC$M=hqE-ujhJICXyIxBvYrIU9-TDC' 'AQci3EUB%shMsg-N%frgU:02ByLs=IPJU0OpgiWit5nexSyxZDncY6WB:=zKZuk5Zy0DD$Ua78%MelgBuMqaHGyKsJUFf9s=UW80PcJmKctb46KveLSiUtNmqrMiL9-Y0I_l5Fnam04CGIg=8@U:Z' 'CvVqJpJzueKcuA$wqwePfyu7VxuWNN3ho$p0zi2H8QFYK$7YlEqOhhb%:hHgjhIjW5vnqWHKNP4' 'ET:vk@rFU4tsvMB0$C_p=xQHaYZjvoF%-BTc%wkFW8yaDAPcCYoR%x$FH5O:' 'HwTon%v7SGSP4FE08jBwwiu5aot2CFKXHTeEAa@38fUcNGOWvE@Mz6WBeDH_VooaZ6AgsXPkVGwy9l@@ZbNXabUU9csiWrrOp0MWUdfi$EZ3w9GkIqtz7I_eOsByOkBOO' 'Ij%2VlFGXSuPvxJGf5UWy6O@1svxGha%b@=%wjkq:CIgE6u7eJOjmQY5qTtxE2Rjbis9@us' 'KBkjG5%9R8K9sOG8UTnAYjxLNAvBmvV5vz3IiZaPmKuLYO03-6asI9lJ_j4@6Xo$KZicaLWJ3Pv8XEwVeUPMwbHYWwbx0pYvNlGMO9F:ZhHAwyctnGy%_eujl%WPd4U2BI7qooOSr85J-C2V$LfY' 'NcRfDfuUQ2=zP8K3CCF5dFcpfiOm6mwenShsAb_F%n6GAGC7fT2JFFn:c35X-3aYwoq7jNX5$ZJ6hI3wnZs$7KgGi7wjulffhHNUxAT0fRRLF39vJ@NvaEMxsMO' 'Oj42AQAEzRoTxa5OuSKIr=A_lwGMy132v4g3Pdq1GvUG9874YseIFQ6QU' 'Ono7avN5GjC:_6dBJ_' 'WHmN2gnmaN-9dVDy4aWo:yNGFzz8qsJyJhWEWcud7$QzN2D9R0efIWWEdu5kwWr73NZm4=@CoCDxrrZnRITr-kGtU_cfW2:%2_am' 'WiFnuTEhAG9FEC6zopQmj-A-$LDQ0T3WULz%ox3UZAPybSV6v1Z$b4L_XBi4M4BMBtJZpz93r9xafpB77r:lbwvitWRyo$odnAUYlYMmU4RvgnNd--e=I5hiEjGLETTtaScWlQp8mYsBovZwM2k' 'XKyH=OsOAF3p%uziGF_ZVr$ivrvhVgD@1u%5RtrV-gl_vqAwHkK@x7YwlxX3qT6WKKQ%PR56NrUBU2dOAOAdzr2=5nJuKPM-T-$ZpQfCL7phxQbUcb:BZOTPaFExc-qK-gDRCDW2' 'd3uUR6OFEwZr%ns1XH_@tbxA@cCPmbBRLdyh7p6V45H$P2$F%w0RqrD3M0g8aGvWpoTFMiBdOTJXjD:JF7=h9a_43xBywYAP%r$SPZi%zDg%ql-KvkdUCtF9OLaQlxmd' 'ePTpbnit%hyNm@WELlpKzNZYOzOTf8EQ$sEfkMy1VOfIUu3coyvIr13-Y7Sv5v-Ivax2Go_GQRFMU1b3362nktT9WOJf3SpT%z8sZmM3gvYQBDgmKI%%RM-G7hyrhgYflOw%z::ZRcv5O:lDCFm' 'evqk743Y@dvZAiG5J05L_ROFV@$2%rVWJ2%3nxV72-W7$e$-SK3tuSHA2mBt$qloC5jwNx33GmQUjD%akhBPu=VJ5g$xhlZiaFtTrjeeM5x7dt4cHpX0cZkmfImndYzGmvwQG:$euFYmXn$_2rA9mKZ' 'gkgUtnihWXsZQTEkrMAWIxir09k3t7jk_IK25t1:cy1XWN0GGqC%FrySdcmU7M8MuPO_ppkLw3=Dfr0UuBAL4%GFk2$Ma10V1jDRGJje%Xx9EV2ERaWKtjpwiZwh0gCSJsj5UL7CR8RtW5opCVFKGGy8Cky' 'hNgsG_8lNRik3PvphqPm0yEH3P%%fYG:kQLY=6O-61Wa6nrV_WVGR6TLB09vHOv%g4VQRP8Gzx7VXUY1qvZyS' 'isA7JVzN12xCxVPJZ_qoLm-pTBuhjjHMvV7o=F:EaClfYNyFGlsfw-Kf%uxdqW-kwk1sPl2vhbjyHU1A6$hz' 'kiJ_fgcdZFDiOptjgH5PN9-PSyLO4fbk_:u5_2tz35lV_iXiJ6cx7pwjTtKy-XGaQ5IefmpJ4N_ZqGsqCsKuqOOBgf9LkUdffHet@Wu' 'lvwtxyhE9:%Q3UxeHiViUyNzJsy:fm38pg_b6s25JvdhOAT=1s0$pG25x=LZ2rlHTszj=gN6M4zHZYr_qrB49i=pA--@WqWLIuX7o1S_SfS@2FSiUZN' 'rC24cw3UBDZ=5qJBUMs9e$=S4Y94ni%Z8639vnrGp=0Hv4z3dNFL0fBLmQ40=EYIY:Z=SLc@QLMSt2zsss2ZXrP7j4=' 'uwGl2s-fFrf@GqS=DQqq2I0LJSsOmM%xzTjS:lzXguE3wChdMoHYtLRKPvfaPOZF2fER@j53evbKa7R%A7r4%YEkD=kicJe@SFiGtXHbKe4gCgPAYbnVn' 'UG37U6KKua2bgc:IHzRs7BnB6FD:2Mt5Cc5NdlsW%$1tyvnfz7S27FvNkroXwAW:mBZLA1@qa9WnDbHCDmQmfPMC9z-Eq6QT0jhhPpqyymaD:R02ghwYo%yx7SAaaq-:x33LYpei$5g8DMl3C' 'y2vjek0FE1PDJC0qpfnN:x8k2wCFZ9xiUF2ege=JnP98R%wxjKkdfEiLWvQzmnW' '8-HCSgH5B%K7P8_jaVtQhBXpBk:pE-$P7ts58U0J@iR9YZntMPl7j$s62yAJO@_9eanFPS54b=UTw$94C-t=HLxT8n6o9P=QnIxq-f1=Ne2dvhe6WbjEQtc' 'YPPh:IFt2mtR6XWSmjHptXL_hbSYu8bMw-JP8@PNyaFkdNFsk$M=xfL6LDKCDM-mSyGA_2MBwZ8Dr4=R1D%7-mC ---truncated---

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction abort on set received ioctl due to item overflow If the set received ioctl fails due to an item overflow when attempting to add the BTRFS_UUID_KEY_RECEIVED_SUBVOL we have to abort the transaction since we did some metadata updates before. This means that if a user calls this ioctl with the same received UUID field for a lot of subvolumes, we will hit the overflow, trigger the transaction abort and turn the filesystem into RO mode. A malicious user could exploit this, and this ioctl does not even requires that a user has admin privileges (CAP_SYS_ADMIN), only that he/she owns the subvolume. Fix this by doing an early check for item overflow before starting a transaction. This is also race safe because we are holding the subvol_sem semaphore in exclusive (write) mode. A test case for fstests will follow soon.

In the Linux kernel, the following vulnerability has been resolved: btrfs: add missing RCU unlock in error path in try_release_subpage_extent_buffer() Call rcu_read_lock() before exiting the loop in try_release_subpage_extent_buffer() because there is a rcu_read_unlock() call past the loop. This has been detected by the Clang thread-safety analyzer.

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050-core: fix pm_runtime error handling The return value of pm_runtime_get_sync() is not checked, allowing the driver to access hardware that may fail to resume. The device usage count is also unconditionally incremented. Use pm_runtime_resume_and_get() which propagates errors and avoids incrementing the usage count on failure. In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate() failure since postdisable does not run when preenable fails.

In the Linux kernel, the following vulnerability has been resolved: iio: imu: adis: Fix NULL pointer dereference in adis_init The adis_init() function dereferences adis->ops to check if the individual function pointers (write, read, reset) are NULL, but does not first check if adis->ops itself is NULL. Drivers like adis16480, adis16490, adis16545 and others do not set custom ops and rely on adis_init() assigning the defaults. Since struct adis is zero-initialized by devm_iio_device_alloc(), adis->ops is NULL when adis_init() is called, causing a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : adis_init+0xc0/0x118 Call trace: adis_init+0xc0/0x118 adis16480_probe+0xe0/0x670 Fix this by checking if adis->ops is NULL before dereferencing it, falling through to assign the default ops in that case.

In the Linux kernel, the following vulnerability has been resolved: iio: light: bh1780: fix PM runtime leak on error path Move pm_runtime_put_autosuspend() before the error check to ensure the PM runtime reference count is always decremented after pm_runtime_get_sync(), regardless of whether the read operation succeeds or fails.