The OS Installation Management component in CA Client Automation r12.9, r14.0, and r14.0 SP1 places an encrypted password into a readable local file during operating system installation, which allows local users to obtain sensitive information by reading this file after operating system installation.

An Absolute Path Traversal issue was discovered in Advantech WebAccess Version 8.1 and prior. The absolute path traversal vulnerability has been identified, which may allow an attacker to traverse the file system to access restricted files or directories.

A Use of Password Hash Instead of Password for Authentication issue was discovered in Dahua DH-IPC-HDBW23A0RN-ZS, DH-IPC-HDBW13A0SN, DH-IPC-HDW1XXX, DH-IPC-HDW2XXX, DH-IPC-HDW4XXX, DH-IPC-HFW1XXX, DH-IPC-HFW2XXX, DH-IPC-HFW4XXX, DH-SD6CXX, DH-NVR1XXX, DH-HCVR4XXX, DH-HCVR5XXX, DHI-HCVR51A04HE-S3, DHI-HCVR51A08HE-S3, and DHI-HCVR58A32S-S2 devices. The use of password hash instead of password for authentication vulnerability was identified, which could allow a malicious user to bypass authentication without obtaining the actual password.

A Password in Configuration File issue was discovered in Dahua DH-IPC-HDBW23A0RN-ZS, DH-IPC-HDBW13A0SN, DH-IPC-HDW1XXX, DH-IPC-HDW2XXX, DH-IPC-HDW4XXX, DH-IPC-HFW1XXX, DH-IPC-HFW2XXX, DH-IPC-HFW4XXX, DH-SD6CXX, DH-NVR1XXX, DH-HCVR4XXX, DH-HCVR5XXX, DHI-HCVR51A04HE-S3, DHI-HCVR51A08HE-S3, and DHI-HCVR58A32S-S2 devices. The password in configuration file vulnerability was identified, which could lead to a malicious user assuming the identity of a privileged user and gaining access to sensitive information.

A Password in Configuration File issue was discovered in Hikvision DS-2CD2xx2F-I Series V5.2.0 build 140721 to V5.4.0 build 160530, DS-2CD2xx0F-I Series V5.2.0 build 140721 to V5.4.0 Build 160401, DS-2CD2xx2FWD Series V5.3.1 build 150410 to V5.4.4 Build 161125, DS-2CD4x2xFWD Series V5.2.0 build 140721 to V5.4.0 Build 160414, DS-2CD4xx5 Series V5.2.0 build 140721 to V5.4.0 Build 160421, DS-2DFx Series V5.2.0 build 140805 to V5.4.5 Build 160928, and DS-2CD63xx Series V5.0.9 build 140305 to V5.3.5 Build 160106 devices. The password in configuration file vulnerability could allow a malicious user to escalate privileges or assume the identity of another user and access sensitive information.

An Improper Authentication issue was discovered in Hikvision DS-2CD2xx2F-I Series V5.2.0 build 140721 to V5.4.0 build 160530, DS-2CD2xx0F-I Series V5.2.0 build 140721 to V5.4.0 Build 160401, DS-2CD2xx2FWD Series V5.3.1 build 150410 to V5.4.4 Build 161125, DS-2CD4x2xFWD Series V5.2.0 build 140721 to V5.4.0 Build 160414, DS-2CD4xx5 Series V5.2.0 build 140721 to V5.4.0 Build 160421, DS-2DFx Series V5.2.0 build 140805 to V5.4.5 Build 160928, and DS-2CD63xx Series V5.0.9 build 140305 to V5.3.5 Build 160106 devices. The improper authentication vulnerability occurs when an application does not adequately or correctly authenticate users. This may allow a malicious user to escalate his or her privileges on the system and gain access to sensitive information.

A Code Injection issue was discovered in CyberVision Kaa IoT Platform, Version 0.7.4. An insufficient-encapsulation vulnerability has been identified, which may allow remote code execution.

A Use of Client-Side Authentication issue was discovered in Advantech B+B SmartWorx MESR901 firmware versions 1.5.2 and prior. The web interface uses JavaScript to check client authentication and redirect unauthorized users. Attackers may intercept requests and bypass authentication to access restricted web pages.

A Header Injection issue was discovered in Certec EDV GmbH atvise scada prior to Version 3.0. An "improper neutralization of HTTP headers for scripting syntax" issue has been identified, which may allow remote code execution.

A Cross-Site Scripting issue was discovered in Certec EDV GmbH atvise scada prior to Version 3.0. This may allow remote code execution.

A Resource Exhaustion issue was discovered in Rockwell Automation ControlLogix 5580 controllers V28.011, V28.012, and V28.013; ControlLogix 5580 controllers V29.011; CompactLogix 5380 controllers V28.011; and CompactLogix 5380 controllers V29.011. This vulnerability may allow an attacker to cause a denial of service condition by sending a series of specific CIP-based commands to the controller.

Citrix XenMobile Server before 10.5.0.24 allows man-in-the-middle attackers to trigger HTTP 302 redirections via vectors involving the HTTP Host header and a cached page. NOTE: the vendor reports "our internal analysis of this issue concluded that this was not a valid vulnerability" because an exploitation scenario would involve a man-in-the-middle attack against a TLS session

Trend Micro OfficeScan 11.0 before SP1 CP 6325 (with Agent Module Build before 6152) and XG before CP 1352 has XSS via a crafted URI using a blocked website.

IBM WebSphere Portal 8.5 and 9.0 could allow a remote attacker to conduct phishing attacks, using an open redirect attack. By persuading a victim to visit a specially-crafted Web site, a remote attacker could exploit this vulnerability to spoof the URL displayed to redirect a user to a malicious Web site that would appear to be trusted. This could allow the attacker to obtain highly sensitive information or conduct further attacks against the victim. IBM X-Force. ID: 122592

IBM WebSphere Cast Iron Solution 7.0.0 and 7.5.0.0 is vulnerable to External Service Interaction attack, caused by improper validation of user-supplied input. A remote attacker could exploit this vulnerability to induce the application to perform server-side DNS lookups or HTTP requests to arbitrary domain names. By submitting suitable payloads, an attacker can cause the application server to attack other systems that it can interact with. IBM X-Force ID: 119516.

IBM WebSphere Cast Iron Solution 7.0.0 and 7.5.0.0 is vulnerable to a denial of service, caused by an XML External Entity Injection (XXE) error when processing XML data. A remote attacker could exploit this vulnerability to expose highly sensitive information or consume all available memory resources. IBM X-Force ID: 119515.

IBM Tivoli Storage Manager 5.5, 6.1-6.4, and 7.1 stores password information in a log file that could be read by a local user when a set password command is issued. IBM X-Force ID: 118472.

IBM Marketing Platform 9.1 and 10.0 is vulnerable to stored cross-site scripting, caused by improper validation of user-supplied input. A remote attacker could exploit this vulnerability to inject malicious script into a Web page which would be executed in a victim's Web browser within the security context of the hosting Web site, once the page is viewed. An attacker could use this vulnerability to steal the victim's cookie-based authentication credentials. IBM X-Force ID: 110564.

Untrusted input execution via igetwild in all iRODS versions before 4.1.11 and 4.2.1 allows other iRODS users (potentially anonymous) to execute remote shell commands via iRODS virtual pathnames. To exploit this vulnerability, a virtual iRODS pathname that includes a semicolon would be retrieved via igetwild. Because igetwild is a Bash script, the part of the pathname following the semicolon would be executed in the user's shell.

An issue was discovered on Accellion FTA devices before FTA_9_12_180. Because mysql_real_escape_string is misused, seos/courier/communication_p2p.php allows SQL injection with the app_id parameter.

An issue was discovered on Accellion FTA devices before FTA_9_12_180. There is XSS in home/seos/courier/smtpg_add.html with the param parameter.

An issue was discovered on Accellion FTA devices before FTA_9_12_180. Because a regular expression (intended to match local https URLs) lacks an initial ^ character, courier/web/1000@/wmProgressval.html allows SSRF attacks with a file:///etc/passwd#https:// URL pattern.

An issue was discovered on Accellion FTA devices before FTA_9_12_180. By sending a POST request to home/seos/courier/web/wmProgressstat.html.php with an attacker domain in the acallow parameter, the device will respond with an Access-Control-Allow-Origin header allowing the attacker to have site access with a bypass of the Same Origin Policy.

An issue was discovered on Accellion FTA devices before FTA_9_12_180. There is XSS in home/seos/courier/user_add.html with the param parameter.

An issue was discovered on Accellion FTA devices before FTA_9_12_180. There is a home/seos/courier/login.html auth_params CRLF attack vector.