Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Arne Franken All In One Favicon.This issue affects All In One Favicon: from n/a through 4.7.

The Colibri Page Builder plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.0.253. This is due to missing or incorrect nonce validation on the cp_shortcode_refresh() function. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.

The Colibri Page Builder plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.0.253. This is due to missing or incorrect nonce validation on the apiCall() function. This makes it possible for unauthenticated attackers to call a limited set of functions that can be used to import images, delete posts, or save theme data via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.

The Colibri WP theme for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.0.94. This is due to missing or incorrect nonce validation on the colibriwp_install_plugin() function. This makes it possible for unauthenticated attackers to install recommended plugins via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.

The Page Builder: Pagelayer – Drag and Drop website builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's Button Widget in all versions up to, and including, 1.8.2 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers with contributor-level and above permissions to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

Denial of service condition in M-Files Server in versions before 24.2 (excluding 23.2 SR7 and 23.8 SR5) allows anonymous user to cause denial of service against other anonymous users.

The Admin side data storage for Contact Form 7 plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the zt_dcfcf_change_status() function in all versions up to, and including, 1.1.1. This makes it possible for unauthenticated attackers to alter the message read status of messages.

The Admin side data storage for Contact Form 7 plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the zt_dcfcf_change_bookmark() function in all versions up to, and including, 1.1.1. This makes it possible for unauthenticated attackers to alter bookmark statuses.

The Admin side data storage for Contact Form 7 plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.1.1. This is due to missing or incorrect nonce validation on the settings update function. This makes it possible for unauthenticated attackers to update the plugin's settings via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.

The Admin side data storage for Contact Form 7 plugin for WordPress is vulnerable to SQL Injection via the 'form-id' parameter in all versions up to, and including, 1.1.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

Sametime Connect desktop chat client includes, but does not use or require, the use of an Eclipse feature called Secure Storage. Using this Eclipse feature to store sensitive data can lead to exposure of that data.

Applications that use UriComponentsBuilder to parse an externally provided URL (e.g. through a query parameter) AND perform validation checks on the host of the parsed URL may be vulnerable to a open redirect https://cwe.mitre.org/data/definitions/601.html  attack or to a SSRF attack if the URL is used after passing validation checks.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix UAF issue in ksmbd_tcp_new_connection() The race is between the handling of a new TCP connection and its disconnection. It leads to UAF on `struct tcp_transport` in ksmbd_tcp_new_connection() function.

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off for validation. However, variable offset ptr alu is not prohibited for this ptr kind. So the variable offset is not checked. The following prog is accepted: func#0 @0 0: R1=ctx() R10=fp0 0: (bf) r6 = r1 ; R1=ctx() R6_w=ctx() 1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys() 2: (b7) r8 = 1024 ; R8_w=1024 3: (37) r8 /= 1 ; R8_w=scalar() 4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0, smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400)) 5: (0f) r7 += r8 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024 mark_precise: frame0: regs=r8 stack= before 3: (37) r8 /= 1 mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 = 1024 6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off =(0x0; 0x400)) R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024, var_off=(0x0; 0x400)) 6: (79) r0 = *(u64 *)(r7 +0) ; R0_w=scalar() 7: (95) exit This prog loads flow_keys to r7, and adds the variable offset r8 to r7, and finally causes out-of-bounds access: BUG: unable to handle page fault for address: ffffc90014c80038 [...] Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline] __bpf_prog_run include/linux/filter.h:651 [inline] bpf_prog_run include/linux/filter.h:658 [inline] bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline] bpf_flow_dissect+0x15f/0x350 net/core/flow_dissector.c:991 bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359 bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline] __sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475 __do_sys_bpf kernel/bpf/syscall.c:5561 [inline] __se_sys_bpf kernel/bpf/syscall.c:5559 [inline] __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fix this by rejecting ptr alu with variable offset on flow_keys. Applying the patch rejects the program with "R7 pointer arithmetic on flow_keys prohibited".

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix stack corruption When tc filters are first added to a net device, the corresponding local port gets bound to an ACL group in the device. The group contains a list of ACLs. In turn, each ACL points to a different TCAM region where the filters are stored. During forwarding, the ACLs are sequentially evaluated until a match is found. One reason to place filters in different regions is when they are added with decreasing priorities and in an alternating order so that two consecutive filters can never fit in the same region because of their key usage. In Spectrum-2 and newer ASICs the firmware started to report that the maximum number of ACLs in a group is more than 16, but the layout of the register that configures ACL groups (PAGT) was not updated to account for that. It is therefore possible to hit stack corruption [1] in the rare case where more than 16 ACLs in a group are required. Fix by limiting the maximum ACL group size to the minimum between what the firmware reports and the maximum ACLs that fit in the PAGT register. Add a test case to make sure the machine does not crash when this condition is hit. [1] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120 [...] dump_stack_lvl+0x36/0x50 panic+0x305/0x330 __stack_chk_fail+0x15/0x20 mlxsw_sp_acl_tcam_group_update+0x116/0x120 mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110 mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix accesses to uninit stack slots Privileged programs are supposed to be able to read uninitialized stack memory (ever since 6715df8d5) but, before this patch, these accesses were permitted inconsistently. In particular, accesses were permitted above state->allocated_stack, but not below it. In other words, if the stack was already "large enough", the access was permitted, but otherwise the access was rejected instead of being allowed to "grow the stack". This undesired rejection was happening in two places: - in check_stack_slot_within_bounds() - in check_stack_range_initialized() This patch arranges for these accesses to be permitted. A bunch of tests that were relying on the old rejection had to change; all of them were changed to add also run unprivileged, in which case the old behavior persists. One tests couldn't be updated - global_func16 - because it can't run unprivileged for other reasons. This patch also fixes the tracking of the stack size for variable-offset reads. This second fix is bundled in the same commit as the first one because they're inter-related. Before this patch, writes to the stack using registers containing a variable offset (as opposed to registers with fixed, known values) were not properly contributing to the function's needed stack size. As a result, it was possible for a program to verify, but then to attempt to read out-of-bounds data at runtime because a too small stack had been allocated for it. Each function tracks the size of the stack it needs in bpf_subprog_info.stack_depth, which is maintained by update_stack_depth(). For regular memory accesses, check_mem_access() was calling update_state_depth() but it was passing in only the fixed part of the offset register, ignoring the variable offset. This was incorrect; the minimum possible value of that register should be used instead. This tracking is now fixed by centralizing the tracking of stack size in grow_stack_state(), and by lifting the calls to grow_stack_state() to check_stack_access_within_bounds() as suggested by Andrii. The code is now simpler and more convincingly tracks the correct maximum stack size. check_stack_range_initialized() can now rely on enough stack having been allocated for the access; this helps with the fix for the first issue. A few tests were changed to also check the stack depth computation. The one that fails without this patch is verifier_var_off:stack_write_priv_vs_unpriv.

In the Linux kernel, the following vulnerability has been resolved: bpf: Defer the free of inner map when necessary When updating or deleting an inner map in map array or map htab, the map may still be accessed by non-sleepable program or sleepable program. However bpf_map_fd_put_ptr() decreases the ref-counter of the inner map directly through bpf_map_put(), if the ref-counter is the last one (which is true for most cases), the inner map will be freed by ops->map_free() in a kworker. But for now, most .map_free() callbacks don't use synchronize_rcu() or its variants to wait for the elapse of a RCU grace period, so after the invocation of ops->map_free completes, the bpf program which is accessing the inner map may incur use-after-free problem. Fix the free of inner map by invoking bpf_map_free_deferred() after both one RCU grace period and one tasks trace RCU grace period if the inner map has been removed from the outer map before. The deferment is accomplished by using call_rcu() or call_rcu_tasks_trace() when releasing the last ref-counter of bpf map. The newly-added rcu_head field in bpf_map shares the same storage space with work field to reduce the size of bpf_map.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid dirent corruption As Al reported in link[1]: f2fs_rename() ... if (old_dir != new_dir && !whiteout) f2fs_set_link(old_inode, old_dir_entry, old_dir_page, new_dir); else f2fs_put_page(old_dir_page, 0); You want correct inumber in the ".." link. And cross-directory rename does move the source to new parent, even if you'd been asked to leave a whiteout in the old place. [1] https://lore.kernel.org/all/20231017055040.GN800259@ZenIV/ With below testcase, it may cause dirent corruption, due to it missed to call f2fs_set_link() to update ".." link to new directory. - mkdir -p dir/foo - renameat2 -w dir/foo bar [ASSERT] (__chk_dots_dentries:1421) --> Bad inode number[0x4] for '..', parent parent ino is [0x3] [FSCK] other corrupted bugs [Fail]

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

A use of externally-controlled format string vulnerability in Fortinet FortiOS 7.2.0 through 7.2.4, FortiOS 7.0.0 through 7.0.11, FortiOS 6.4.0 through 6.4.12, FortiOS 6.2.0 through 6.2.14, FortiOS 6.0.0 through 6.0.16, FortiOS 5.6 all versions, FortiOS 5.4 all versions, FortiOS 5.2 all versions, FortiOS 5.0 all versions, FortiOS 4.3 all versions, FortiOS 4.2 all versions, FortiOS 4.1 all versions, FortiOS 4.0 all versions, FortiPAM 1.0 all versions, FortiProxy 7.2.0 through 7.2.4, FortiProxy 7.0.0 through 7.0.10, FortiProxy 2.0.0 through 2.0.12, FortiProxy 01.02 all versions, FortiProxy 1.2 all versions, FortiProxy 01.01 all versions, FortiProxy 1.1 all versions, FortiProxy 01.00 all versions allows attacker to execute unauthorized code or commands via specially crafted command.

A null pointer dereference vulnerability in Fortinet FortiOS 7.2.0 through 7.2.4, FortiOS 7.0.0 through 7.0.11, FortiOS 6.4.0 through 6.4.12, FortiOS 6.2.0 through 6.2.14, FortiOS 6.0.0 through 6.0.16, FortiProxy 7.2.0 through 7.2.3, FortiProxy 7.0.0 through 7.0.10, FortiProxy 2.0.0 through 2.0.12, FortiProxy 01.02 all versions, FortiProxy 1.2 all versions, FortiProxy 01.01 all versions, FortiProxy 1.1 all versions, FortiProxy 01.00 all versions allows attacker to denial of service via specially crafted HTTP requests.

The Event Tickets and Registration plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the 'email' action in all versions up to, and including, 5.8.1. This makes it possible for authenticated attackers, with contributor-level access and above, to email the attendees list to themselves.

The User Feedback – Create Interactive Feedback Form, User Surveys, and Polls in Seconds plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'page_submitted' 'link' value in all versions up to, and including, 1.0.13 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in the feedback submission page that will execute when a user clicks the link, while also pressing the command key.

An issue in MAXON CINEMA 4D R2024.2.0 allows a local attacker to execute arbitrary code via a crafted c4d_base.xdl64 file.

A vulnerability was determined in ZKTeco ZKBio Access IVS up to 3.3.2. This impacts an unknown function of the component Department Name Search Bar. This manipulation with the input <marquee>hi causes cross site scripting. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor explains: "ZKBio Access IVS is no longer maintained and the product has been replaced by ZKBio CVAccess, it is recommended to replace it with the latest version of ZKBio CVAccess." This vulnerability only affects products that are no longer supported by the maintainer.