CVE Tracker
254,352 total CVEsLive vulnerability feed from the National Vulnerability Database
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in andy_moyle Church Admin church-admin.This issue affects Church Admin: from n/a through <= 4.4.4.
Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in vCita Online Booking & Scheduling Calendar for WordPress by vcita allows Stored XSS.This issue affects Online Booking & Scheduling Calendar for WordPress by vcita: from n/a through 4.4.0.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in wpjobportal WP Job Portal wp-job-portal allows DOM-Based XSS.This issue affects WP Job Portal: from n/a through <= 2.1.3.
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in wpjobportal WP Job Portal wp-job-portal.This issue affects WP Job Portal: from n/a through <= 2.1.3.
In the Linux kernel, the following vulnerability has been resolved: dma-buf/sw-sync: don't enable IRQ from sync_print_obj() Since commit a6aa8fca4d79 ("dma-buf/sw-sync: Reduce irqsave/irqrestore from known context") by error replaced spin_unlock_irqrestore() with spin_unlock_irq() for both sync_debugfs_show() and sync_print_obj() despite sync_print_obj() is called from sync_debugfs_show(), lockdep complains inconsistent lock state warning. Use plain spin_{lock,unlock}() for sync_print_obj(), for sync_debugfs_show() is already using spin_{lock,unlock}_irq().
In the Linux kernel, the following vulnerability has been resolved: bpf: Allow delete from sockmap/sockhash only if update is allowed We have seen an influx of syzkaller reports where a BPF program attached to a tracepoint triggers a locking rule violation by performing a map_delete on a sockmap/sockhash. We don't intend to support this artificial use scenario. Extend the existing verifier allowed-program-type check for updating sockmap/sockhash to also cover deleting from a map. From now on only BPF programs which were previously allowed to update sockmap/sockhash can delete from these map types.
In the Linux kernel, the following vulnerability has been resolved: tpm_tis_spi: Account for SPI header when allocating TPM SPI xfer buffer The TPM SPI transfer mechanism uses MAX_SPI_FRAMESIZE for computing the maximum transfer length and the size of the transfer buffer. As such, it does not account for the 4 bytes of header that prepends the SPI data frame. This can result in out-of-bounds accesses and was confirmed with KASAN. Introduce SPI_HDRSIZE to account for the header and use to allocate the transfer buffer.
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix loop termination condition in gss_free_in_token_pages() The in_token->pages[] array is not NULL terminated. This results in the following KASAN splat: KASAN: maybe wild-memory-access in range [0x04a2013400000008-0x04a201340000000f]
Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Live Composer Team Page Builder: Live Composer allows Stored XSS.This issue affects Page Builder: Live Composer: from n/a through 1.5.42.
Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in John West Slideshow SE allows Stored XSS.This issue affects Slideshow SE: from n/a through 2.5.17.
In the Linux kernel, the following vulnerability has been resolved: enic: Validate length of nl attributes in enic_set_vf_port enic_set_vf_port assumes that the nl attribute IFLA_PORT_PROFILE is of length PORT_PROFILE_MAX and that the nl attributes IFLA_PORT_INSTANCE_UUID, IFLA_PORT_HOST_UUID are of length PORT_UUID_MAX. These attributes are validated (in the function do_setlink in rtnetlink.c) using the nla_policy ifla_port_policy. The policy defines IFLA_PORT_PROFILE as NLA_STRING, IFLA_PORT_INSTANCE_UUID as NLA_BINARY and IFLA_PORT_HOST_UUID as NLA_STRING. That means that the length validation using the policy is for the max size of the attributes and not on exact size so the length of these attributes might be less than the sizes that enic_set_vf_port expects. This might cause an out of bands read access in the memcpys of the data of these attributes in enic_set_vf_port.
In the Linux kernel, the following vulnerability has been resolved: soundwire: cadence: fix invalid PDI offset For some reason, we add an offset to the PDI, presumably to skip the PDI0 and PDI1 which are reserved for BPT. This code is however completely wrong and leads to an out-of-bounds access. We were just lucky so far since we used only a couple of PDIs and remained within the PDI array bounds. A Fixes: tag is not provided since there are no known platforms where the out-of-bounds would be accessed, and the initial code had problems as well. A follow-up patch completely removes this useless offset.
In the Linux kernel, the following vulnerability has been resolved: watchdog: cpu5wdt.c: Fix use-after-free bug caused by cpu5wdt_trigger When the cpu5wdt module is removing, the origin code uses del_timer() to de-activate the timer. If the timer handler is running, del_timer() could not stop it and will return directly. If the port region is released by release_region() and then the timer handler cpu5wdt_trigger() calls outb() to write into the region that is released, the use-after-free bug will happen. Change del_timer() to timer_shutdown_sync() in order that the timer handler could be finished before the port region is released.
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind. Hang on to the control IDs instead of pointers since those are correctly handled with locks.
In the Linux kernel, the following vulnerability has been resolved: fuse: clear FR_SENT when re-adding requests into pending list The following warning was reported by lee bruce: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 8264 at fs/fuse/dev.c:300 fuse_request_end+0x685/0x7e0 fs/fuse/dev.c:300 Modules linked in: CPU: 0 PID: 8264 Comm: ab2 Not tainted 6.9.0-rc7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:fuse_request_end+0x685/0x7e0 fs/fuse/dev.c:300 ...... Call Trace: <TASK> fuse_dev_do_read.constprop.0+0xd36/0x1dd0 fs/fuse/dev.c:1334 fuse_dev_read+0x166/0x200 fs/fuse/dev.c:1367 call_read_iter include/linux/fs.h:2104 [inline] new_sync_read fs/read_write.c:395 [inline] vfs_read+0x85b/0xba0 fs/read_write.c:476 ksys_read+0x12f/0x260 fs/read_write.c:619 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xce/0x260 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f ...... </TASK> The warning is due to the FUSE_NOTIFY_RESEND notify sent by the write() syscall in the reproducer program and it happens as follows: (1) calls fuse_dev_read() to read the INIT request The read succeeds. During the read, bit FR_SENT will be set on the request. (2) calls fuse_dev_write() to send an USE_NOTIFY_RESEND notify The resend notify will resend all processing requests, so the INIT request is moved from processing list to pending list again. (3) calls fuse_dev_read() with an invalid output address fuse_dev_read() will try to copy the same INIT request to the output address, but it will fail due to the invalid address, so the INIT request is ended and triggers the warning in fuse_request_end(). Fix it by clearing FR_SENT when re-adding requests into pending list.
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Check 'folio' pointer for NULL It can be NULL if bmap is called.
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Use variable length array instead of fixed size Should fix smatch warning: ntfs_set_label() error: __builtin_memcpy() 'uni->name' too small (20 vs 256)
In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Add callback function pointer check before its call In dpu_core_irq_callback_handler() callback function pointer is compared to NULL, but then callback function is unconditionally called by this pointer. Fix this bug by adding conditional return. Found by Linux Verification Center (linuxtesting.org) with SVACE. Patchwork: https://patchwork.freedesktop.org/patch/588237/
In the Linux kernel, the following vulnerability has been resolved: media: stk1160: fix bounds checking in stk1160_copy_video() The subtract in this condition is reversed. The ->length is the length of the buffer. The ->bytesused is how many bytes we have copied thus far. When the condition is reversed that means the result of the subtraction is always negative but since it's unsigned then the result is a very high positive value. That means the overflow check is never true. Additionally, the ->bytesused doesn't actually work for this purpose because we're not writing to "buf->mem + buf->bytesused". Instead, the math to calculate the destination where we are writing is a bit involved. You calculate the number of full lines already written, multiply by two, skip a line if necessary so that we start on an odd numbered line, and add the offset into the line. To fix this buffer overflow, just take the actual destination where we are writing, if the offset is already out of bounds print an error and return. Otherwise, write up to buf->length bytes.
Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/cs_dsp_ctl: Use private_free for control cleanup Use the control private_free callback to free the associated data block. This ensures that the memory won't leak, whatever way the control gets destroyed. The original implementation didn't actually remove the ALSA controls in hda_cs_dsp_control_remove(). It only freed the internal tracking structure. This meant it was possible to remove/unload the amp driver while leaving its ALSA controls still present in the soundcard. Obviously attempting to access them could cause segfaults or at least dereferencing stale pointers.
In the Linux kernel, the following vulnerability has been resolved: nfc: nci: Fix uninit-value in nci_rx_work syzbot reported the following uninit-value access issue [1] nci_rx_work() parses received packet from ndev->rx_q. It should be validated header size, payload size and total packet size before processing the packet. If an invalid packet is detected, it should be silently discarded.
In the Linux kernel, the following vulnerability has been resolved: tcp: Fix shift-out-of-bounds in dctcp_update_alpha(). In dctcp_update_alpha(), we use a module parameter dctcp_shift_g as follows: alpha -= min_not_zero(alpha, alpha >> dctcp_shift_g); ... delivered_ce <<= (10 - dctcp_shift_g); It seems syzkaller started fuzzing module parameters and triggered shift-out-of-bounds [0] by setting 100 to dctcp_shift_g: memcpy((void*)0x20000080, "/sys/module/tcp_dctcp/parameters/dctcp_shift_g\000", 47); res = syscall(__NR_openat, /*fd=*/0xffffffffffffff9cul, /*file=*/0x20000080ul, /*flags=*/2ul, /*mode=*/0ul); memcpy((void*)0x20000000, "100\000", 4); syscall(__NR_write, /*fd=*/r[0], /*val=*/0x20000000ul, /*len=*/4ul); Let's limit the max value of dctcp_shift_g by param_set_uint_minmax(). With this patch: # echo 10 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g # cat /sys/module/tcp_dctcp/parameters/dctcp_shift_g 10 # echo 11 > /sys/module/tcp_dctcp/parameters/dctcp_shift_g -bash: echo: write error: Invalid argument [0]: UBSAN: shift-out-of-bounds in net/ipv4/tcp_dctcp.c:143:12 shift exponent 100 is too large for 32-bit type 'u32' (aka 'unsigned int') CPU: 0 PID: 8083 Comm: syz-executor345 Not tainted 6.9.0-05151-g1b294a1f3561 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x201/0x300 lib/dump_stack.c:114 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_shift_out_of_bounds+0x346/0x3a0 lib/ubsan.c:468 dctcp_update_alpha+0x540/0x570 net/ipv4/tcp_dctcp.c:143 tcp_in_ack_event net/ipv4/tcp_input.c:3802 [inline] tcp_ack+0x17b1/0x3bc0 net/ipv4/tcp_input.c:3948 tcp_rcv_state_process+0x57a/0x2290 net/ipv4/tcp_input.c:6711 tcp_v4_do_rcv+0x764/0xc40 net/ipv4/tcp_ipv4.c:1937 sk_backlog_rcv include/net/sock.h:1106 [inline] __release_sock+0x20f/0x350 net/core/sock.c:2983 release_sock+0x61/0x1f0 net/core/sock.c:3549 mptcp_subflow_shutdown+0x3d0/0x620 net/mptcp/protocol.c:2907 mptcp_check_send_data_fin+0x225/0x410 net/mptcp/protocol.c:2976 __mptcp_close+0x238/0xad0 net/mptcp/protocol.c:3072 mptcp_close+0x2a/0x1a0 net/mptcp/protocol.c:3127 inet_release+0x190/0x1f0 net/ipv4/af_inet.c:437 __sock_release net/socket.c:659 [inline] sock_close+0xc0/0x240 net/socket.c:1421 __fput+0x41b/0x890 fs/file_table.c:422 task_work_run+0x23b/0x300 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x9c8/0x2540 kernel/exit.c:878 do_group_exit+0x201/0x2b0 kernel/exit.c:1027 __do_sys_exit_group kernel/exit.c:1038 [inline] __se_sys_exit_group kernel/exit.c:1036 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1036 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xe4/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x67/0x6f RIP: 0033:0x7f6c2b5005b6 Code: Unable to access opcode bytes at 0x7f6c2b50058c. RSP: 002b:00007ffe883eb948 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00007f6c2b5862f0 RCX: 00007f6c2b5005b6 RDX: 0000000000000001 RSI: 000000000000003c RDI: 0000000000000001 RBP: 0000000000000001 R08: 00000000000000e7 R09: ffffffffffffffc0 R10: 0000000000000006 R11: 0000000000000246 R12: 00007f6c2b5862f0 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 </TASK>
Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
In the Linux kernel, the following vulnerability has been resolved: tls: fix missing memory barrier in tls_init In tls_init(), a write memory barrier is missing, and store-store reordering may cause NULL dereference in tls_{setsockopt,getsockopt}. CPU0 CPU1 ----- ----- // In tls_init() // In tls_ctx_create() ctx = kzalloc() ctx->sk_proto = READ_ONCE(sk->sk_prot) -(1) // In update_sk_prot() WRITE_ONCE(sk->sk_prot, tls_prots) -(2) // In sock_common_setsockopt() READ_ONCE(sk->sk_prot)->setsockopt() // In tls_{setsockopt,getsockopt}() ctx->sk_proto->setsockopt() -(3) In the above scenario, when (1) and (2) are reordered, (3) can observe the NULL value of ctx->sk_proto, causing NULL dereference. To fix it, we rely on rcu_assign_pointer() which implies the release barrier semantic. By moving rcu_assign_pointer() after ctx->sk_proto is initialized, we can ensure that ctx->sk_proto are visible when changing sk->sk_prot.
Showing 141351-141375 of 254,352 CVEs