CVE Tracker
254,408 total CVEsLive vulnerability feed from the National Vulnerability Database
When deploying Cloud Foundry together with the haproxy-boshrelease and using a non default configuration, it might be possible to craft HTTP requests that bypass mTLS authentication to Cloud Foundry applications. You are affected if you have route-services enabled in routing-release and have configured the haproxy-boshrelease property “ha_proxy.forwarded_client_cert” to “forward_only_if_route_service”.
The Snippet Shortcodes plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 4.1.4. This is due to missing or incorrect nonce validation when adding or editing shortcodes. This makes it possible for unauthenticated attackers to modify shortcodes via a forged request granted they can trick a site administrator into performing an action such as clicking on a link.
The TCP protocol in RFC 9293 has a timing side channel that makes it easier for remote attackers to infer the content of one TCP connection from a client system (to any server), when that client system is concurrently obtaining TCP data at a slow rate from an attacker-controlled server, aka the "SnailLoad" issue. For example, the attack can begin by measuring RTTs via the TCP segments whose role is to provide an ACK control bit and an Acknowledgment Number.
Improper Validation of Array Index vulnerability in Samsung Open Source Walrus Webassembly runtime engine allows a segmentation fault issue. This issue affects Walrus: before 72c7230f32a0b791355bbdfc78669701024b0956.
The net/http HTTP/1.1 client mishandled the case where a server responds to a request with an "Expect: 100-continue" header with a non-informational (200 or higher) status. This mishandling could leave a client connection in an invalid state, where the next request sent on the connection will fail. An attacker sending a request to a net/http/httputil.ReverseProxy proxy can exploit this mishandling to cause a denial of service by sending "Expect: 100-continue" requests which elicit a non-informational response from the backend. Each such request leaves the proxy with an invalid connection, and causes one subsequent request using that connection to fail.
SkillTree is a micro-learning gamification platform. Prior to version 2.12.6, the endpoint `/admin/projects/{projectname}/skills/{skillname}/video` (and probably others) is open to a cross-site request forgery (CSRF) vulnerability. Due to the endpoint being CSRFable e.g POST request, supports a content type that can be exploited (multipart file upload), makes a state change and has no CSRF mitigations in place (samesite flag, CSRF token). It is possible to perform a CSRF attack against a logged in admin account, allowing an attacker that can target a logged in admin of Skills Service to modify the videos, captions, and text of the skill. Version 2.12.6 contains a patch for this issue.
Command go env is documented as outputting a shell script containing the Go environment. However, go env doesn't sanitize values, so executing its output as a shell script can cause various bad bahaviors, including executing arbitrary commands or inserting new environment variables. This issue is relatively minor because, in general, if an attacker can set arbitrary environment variables on a system, they have better attack vectors than making "go env" print them out.
httpTokenCacheKey uses path.Base to extract the expected HTTP-01 token value to lookup in the DirCache implementation. On Windows, path.Base acts differently to filepath.Base, since Windows uses a different path separator (\ vs. /), allowing a user to provide a relative path, i.e. .well-known/acme-challenge/..\..\asd becomes ..\..\asd. The extracted path is then suffixed with +http-01, joined with the cache directory, and opened. Since the controlled path is suffixed with +http-01 before opening, the impact of this is significantly limited, since it only allows reading arbitrary files on the system if and only if they have this suffix.
Vulnerability in Realtek RtsPer driver for PCIe Card Reader (RtsPer.sys) before 10.0.22000.21355 and Realtek RtsUer driver for USB Card Reader (RtsUer.sys) before 10.0.22000.31274 allows writing to kernel memory beyond the SystemBuffer of the IRP.
Vulnerability in Realtek RtsPer driver for PCIe Card Reader (RtsPer.sys) before 10.0.22000.21355 and Realtek RtsUer driver for USB Card Reader (RtsUer.sys) before 10.0.22000.31274 allows for the leakage of kernel memory from both the stack and the heap.
Vulnerability in Realtek RtsPer driver for PCIe Card Reader (RtsPer.sys) before 10.0.22000.21355 and Realtek RtsUer driver for USB Card Reader (RtsUer.sys) before 10.0.22000.31274 provides read and write access to the PCI configuration space of the device.
Vulnerability in Realtek RtsPer driver for PCIe Card Reader (RtsPer.sys) before 10.0.22000.21355 and Realtek RtsUer driver for USB Card Reader (RtsUer.sys) before 10.0.22000.31274 leaks driver logs that contain addresses of kernel mode objects, weakening KASLR.
OpenSSH 9.5 through 9.7 before 9.8 sometimes allows timing attacks against echo-off password entry (e.g., for su and Sudo) because of an ObscureKeystrokeTiming logic error. Similarly, other timing attacks against keystroke entry could occur.
An issue discovered in MSP360 Backup Agent v7.8.5.15 and v7.9.4.84 allows attackers to obtain network share credentials used in a backup due to enginesettings.list being encrypted with a hard coded key.
A flaw was found in the QEMU disk image utility (qemu-img) 'info' command. A specially crafted image file containing a `json:{}` value describing block devices in QMP could cause the qemu-img process on the host to consume large amounts of memory or CPU time, leading to denial of service or read/write to an existing external file.
In versions of Akana in versions prior to and including 2022.1.3 validation is broken when using the SAML Single Sign-On (SSO) functionality.
aimeos/ai-admin-graphql is the Aimeos GraphQL API admin interface. Starting in version 2022.04.01 and prior to versions 2022.10.10, 2023.10.6, and 2024.04.6, an improper access control vulnerability allows an editor to modify and take over an admin account in the back end. Versions 2022.10.10, 2023.10.6, and 2024.04.6 fix this issue.
Under certain circumstances the web interface users credentials may be recovered by an authenticated user.
`yt-dlp` and `youtube-dl` are command-line audio/video downloaders. Prior to the fixed versions, `yt-dlp` and `youtube-dl` do not limit the extensions of downloaded files, which could lead to arbitrary filenames being created in the download folder (and path traversal on Windows). Since `yt-dlp` and `youtube-dl` also read config from the working directory (and on Windows executables will be executed from the `yt-dlp` or `youtube-dl` directory), this could lead to arbitrary code being executed. `yt-dlp` version 2024.07.01 fixes this issue by whitelisting the allowed extensions. `youtube-dl` fixes this issue in commit `d42a222` on the `master` branch and in nightly builds tagged 2024-07-03 or later. This might mean some very uncommon extensions might not get downloaded, however it will also limit the possible exploitation surface. In addition to upgrading, have `.%(ext)s` at the end of the output template and make sure the user trusts the websites that they are downloading from. Also, make sure to never download to a directory within PATH or other sensitive locations like one's user directory, `system32`, or other binaries locations. For users who are not able to upgrade, keep the default output template (`-o "%(title)s [%(id)s].%(ext)s`); make sure the extension of the media to download is a common video/audio/sub/... one; try to avoid the generic extractor; and/or use `--ignore-config --config-location ...` to not load config from common locations.
GeoTools is an open source Java library that provides tools for geospatial data. Prior to versions 31.2, 30.4, and 29.6, Remote Code Execution (RCE) is possible if an application uses certain GeoTools functionality to evaluate XPath expressions supplied by user input. Versions 31.2, 30.4, and 29.6 contain a fix for this issue. As a workaround, GeoTools can operate with reduced functionality by removing the `gt-complex` jar from one's application. As an example of the impact, application schema `datastore` would not function without the ability to use XPath expressions to query complex content. Alternatively, one may utilize a drop-in replacement GeoTools jar from SourceForge for versions 31.1, 30.3, 30.2, 29.2, 28.2, 27.5, 27.4, 26.7, 26.4, 25.2, and 24.0. These jars are for download only and are not available from maven central, intended to quickly provide a fix to affected applications.
Under certain circumstances unnecessary user details are provided within system logs
Under certain circumstances the Linux users credentials may be recovered by an authenticated user.
Under certain circumstances the web interface will accept characters unrelated to the expected input.
A vulnerability was found in ORIPA up to 1.72. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file src/main/java/oripa/persistence/doc/loader/LoaderXML.java. The manipulation leads to deserialization. The attack can be launched remotely. Upgrading to version 1.80 is able to address this issue. It is recommended to upgrade the affected component. The identifier VDB-270169 was assigned to this vulnerability.
The Post Meta Data Manager plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘$meta_key’ parameter in all versions up to, and including, 1.2.3 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
Showing 141076-141100 of 254,408 CVEs