radar

ONE Sentinel

shield

CVE Tracker

254,664 total CVEs

Live vulnerability feed from the National Vulnerability Database

N/A

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

9.8

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: SHAMPO, Fix invalid WQ linked list unlink When all the strides in a WQE have been consumed, the WQE is unlinked from the WQ linked list (mlx5_wq_ll_pop()). For SHAMPO, it is possible to receive CQEs with 0 consumed strides for the same WQE even after the WQE is fully consumed and unlinked. This triggers an additional unlink for the same wqe which corrupts the linked list. Fix this scenario by accepting 0 sized consumed strides without unlinking the WQE again.

7.8

In the Linux kernel, the following vulnerability has been resolved: drm/mgag200: Bind I2C lifetime to DRM device Managed cleanup with devm_add_action_or_reset() will release the I2C adapter when the underlying Linux device goes away. But the connector still refers to it, so this cleanup leaves behind a stale pointer in struct drm_connector.ddc. Bind the lifetime of the I2C adapter to the connector's lifetime by using DRM's managed release. When the DRM device goes away (after the Linux device) DRM will first clean up the connector and then clean up the I2C adapter.

7.8

In the Linux kernel, the following vulnerability has been resolved: binfmt_flat: Fix corruption when not offsetting data start Commit 04d82a6d0881 ("binfmt_flat: allow not offsetting data start") introduced a RISC-V specific variant of the FLAT format which does not allocate any space for the (obsolete) array of shared library pointers. However, it did not disable the code which initializes the array, resulting in the corruption of sizeof(long) bytes before the DATA segment, generally the end of the TEXT segment. Introduce MAX_SHARED_LIBS_UPDATE which depends on the state of CONFIG_BINFMT_FLAT_NO_DATA_START_OFFSET to guard the initialization of the shared library pointer region so that it will only be initialized if space is reserved for it.

5.5

In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix pti_clone_pgtable() alignment assumption Guenter reported dodgy crashes on an i386-nosmp build using GCC-11 that had the form of endless traps until entry stack exhaust and then #DF from the stack guard. It turned out that pti_clone_pgtable() had alignment assumptions on the start address, notably it hard assumes start is PMD aligned. This is true on x86_64, but very much not true on i386. These assumptions can cause the end condition to malfunction, leading to a 'short' clone. Guess what happens when the user mapping has a short copy of the entry text? Use the correct increment form for addr to avoid alignment assumptions.

5.5

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not BUG_ON() when freeing tree block after error When freeing a tree block, at btrfs_free_tree_block(), if we fail to create a delayed reference we don't deal with the error and just do a BUG_ON(). The error most likely to happen is -ENOMEM, and we have a comment mentioning that only -ENOMEM can happen, but that is not true, because in case qgroups are enabled any error returned from btrfs_qgroup_trace_extent_post() (can be -EUCLEAN or anything returned from btrfs_search_slot() for example) can be propagated back to btrfs_free_tree_block(). So stop doing a BUG_ON() and return the error to the callers and make them abort the transaction to prevent leaking space. Syzbot was triggering this, likely due to memory allocation failure injection.

5.5

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: core: Check for unset descriptor Make sure the descriptor has been set before looking at maxpacket. This fixes a null pointer panic in this case. This may happen if the gadget doesn't properly set up the endpoint for the current speed, or the gadget descriptors are malformed and the descriptor for the speed/endpoint are not found. No current gadget driver is known to have this problem, but this may cause a hard-to-find bug during development of new gadgets.

7.8

In the Linux kernel, the following vulnerability has been resolved: tracefs: Use generic inode RCU for synchronizing freeing With structure layout randomization enabled for 'struct inode' we need to avoid overlapping any of the RCU-used / initialized-only-once members, e.g. i_lru or i_sb_list to not corrupt related list traversals when making use of the rcu_head. For an unlucky structure layout of 'struct inode' we may end up with the following splat when running the ftrace selftests: [<...>] list_del corruption, ffff888103ee2cb0->next (tracefs_inode_cache+0x0/0x4e0 [slab object]) is NULL (prev is tracefs_inode_cache+0x78/0x4e0 [slab object]) [<...>] ------------[ cut here ]------------ [<...>] kernel BUG at lib/list_debug.c:54! [<...>] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [<...>] CPU: 3 PID: 2550 Comm: mount Tainted: G N 6.8.12-grsec+ #122 ed2f536ca62f28b087b90e3cc906a8d25b3ddc65 [<...>] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [<...>] RIP: 0010:[<ffffffff84656018>] __list_del_entry_valid_or_report+0x138/0x3e0 [<...>] Code: 48 b8 99 fb 65 f2 ff ff ff ff e9 03 5c d9 fc cc 48 b8 99 fb 65 f2 ff ff ff ff e9 33 5a d9 fc cc 48 b8 99 fb 65 f2 ff ff ff ff <0f> 0b 4c 89 e9 48 89 ea 48 89 ee 48 c7 c7 60 8f dd 89 31 c0 e8 2f [<...>] RSP: 0018:fffffe80416afaf0 EFLAGS: 00010283 [<...>] RAX: 0000000000000098 RBX: ffff888103ee2cb0 RCX: 0000000000000000 [<...>] RDX: ffffffff84655fe8 RSI: ffffffff89dd8b60 RDI: 0000000000000001 [<...>] RBP: ffff888103ee2cb0 R08: 0000000000000001 R09: fffffbd0082d5f25 [<...>] R10: fffffe80416af92f R11: 0000000000000001 R12: fdf99c16731d9b6d [<...>] R13: 0000000000000000 R14: ffff88819ad4b8b8 R15: 0000000000000000 [<...>] RBX: tracefs_inode_cache+0x0/0x4e0 [slab object] [<...>] RDX: __list_del_entry_valid_or_report+0x108/0x3e0 [<...>] RSI: __func__.47+0x4340/0x4400 [<...>] RBP: tracefs_inode_cache+0x0/0x4e0 [slab object] [<...>] RSP: process kstack fffffe80416afaf0+0x7af0/0x8000 [mount 2550 2550] [<...>] R09: kasan shadow of process kstack fffffe80416af928+0x7928/0x8000 [mount 2550 2550] [<...>] R10: process kstack fffffe80416af92f+0x792f/0x8000 [mount 2550 2550] [<...>] R14: tracefs_inode_cache+0x78/0x4e0 [slab object] [<...>] FS: 00006dcb380c1840(0000) GS:ffff8881e0600000(0000) knlGS:0000000000000000 [<...>] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [<...>] CR2: 000076ab72b30e84 CR3: 000000000b088004 CR4: 0000000000360ef0 shadow CR4: 0000000000360ef0 [<...>] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [<...>] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [<...>] ASID: 0003 [<...>] Stack: [<...>] ffffffff818a2315 00000000f5c856ee ffffffff896f1840 ffff888103ee2cb0 [<...>] ffff88812b6b9750 0000000079d714b6 fffffbfff1e9280b ffffffff8f49405f [<...>] 0000000000000001 0000000000000000 ffff888104457280 ffffffff8248b392 [<...>] Call Trace: [<...>] <TASK> [<...>] [<ffffffff818a2315>] ? lock_release+0x175/0x380 fffffe80416afaf0 [<...>] [<ffffffff8248b392>] list_lru_del+0x152/0x740 fffffe80416afb48 [<...>] [<ffffffff8248ba93>] list_lru_del_obj+0x113/0x280 fffffe80416afb88 [<...>] [<ffffffff8940fd19>] ? _atomic_dec_and_lock+0x119/0x200 fffffe80416afb90 [<...>] [<ffffffff8295b244>] iput_final+0x1c4/0x9a0 fffffe80416afbb8 [<...>] [<ffffffff8293a52b>] dentry_unlink_inode+0x44b/0xaa0 fffffe80416afbf8 [<...>] [<ffffffff8293fefc>] __dentry_kill+0x23c/0xf00 fffffe80416afc40 [<...>] [<ffffffff8953a85f>] ? __this_cpu_preempt_check+0x1f/0xa0 fffffe80416afc48 [<...>] [<ffffffff82949ce5>] ? shrink_dentry_list+0x1c5/0x760 fffffe80416afc70 [<...>] [<ffffffff82949b71>] ? shrink_dentry_list+0x51/0x760 fffffe80416afc78 [<...>] [<ffffffff82949da8>] shrink_dentry_list+0x288/0x760 fffffe80416afc80 [<...>] [<ffffffff8294ae75>] shrink_dcache_sb+0x155/0x420 fffffe80416afcc8 [<...>] [<ffffffff8953a7c3>] ? debug_smp_processor_id+0x23/0xa0 fffffe80416afce0 [<...>] [<ffffffff8294ad20>] ? do_one_tre ---truncated---

N/A

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

7.8

In the Linux kernel, the following vulnerability has been resolved: ALSA: line6: Fix racy access to midibuf There can be concurrent accesses to line6 midibuf from both the URB completion callback and the rawmidi API access. This could be a cause of KMSAN warning triggered by syzkaller below (so put as reported-by here). This patch protects the midibuf call of the former code path with a spinlock for avoiding the possible races.

N/A

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

7.8

In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: fix TX fifo corruption Sometimes, when a packet is received on channel A at almost the same time as a packet is about to be transmitted on channel B, we observe with a logic analyzer that the received packet on channel A is transmitted on channel B. In other words, the Tx buffer data on channel B is corrupted with data from channel A. The problem appeared since commit 4409df5866b7 ("serial: sc16is7xx: change EFR lock to operate on each channels"), which changed the EFR locking to operate on each channel instead of chip-wise. This commit has introduced a regression, because the EFR lock is used not only to protect the EFR registers access, but also, in a very obscure and undocumented way, to protect access to the data buffer, which is shared by the Tx and Rx handlers, but also by each channel of the IC. Fix this regression first by switching to kfifo_out_linear_ptr() in sc16is7xx_handle_tx() to eliminate the need for a shared Rx/Tx buffer. Secondly, replace the chip-wise Rx buffer with a separate Rx buffer for each channel.

7.1

In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: fix invalid FIFO access with special register set When enabling access to the special register set, Receiver time-out and RHR interrupts can happen. In this case, the IRQ handler will try to read from the FIFO thru the RHR register at address 0x00, but address 0x00 is mapped to DLL register, resulting in erroneous FIFO reading. Call graph example: sc16is7xx_startup(): entry sc16is7xx_ms_proc(): entry sc16is7xx_set_termios(): entry sc16is7xx_set_baud(): DLH/DLL = $009C --> access special register set sc16is7xx_port_irq() entry --> IIR is 0x0C sc16is7xx_handle_rx() entry sc16is7xx_fifo_read(): --> unable to access FIFO (RHR) because it is mapped to DLL (LCR=LCR_CONF_MODE_A) sc16is7xx_set_baud(): exit --> Restore access to general register set Fix the problem by claiming the efr_lock mutex when accessing the Special register set.

7.8

In the Linux kernel, the following vulnerability has been resolved: parisc: fix a possible DMA corruption ARCH_DMA_MINALIGN was defined as 16 - this is too small - it may be possible that two unrelated 16-byte allocations share a cache line. If one of these allocations is written using DMA and the other is written using cached write, the value that was written with DMA may be corrupted. This commit changes ARCH_DMA_MINALIGN to be 128 on PA20 and 32 on PA1.1 - that's the largest possible cache line size. As different parisc microarchitectures have different cache line size, we define arch_slab_minalign(), cache_line_size() and dma_get_cache_alignment() so that the kernel may tune slab cache parameters dynamically, based on the detected cache line size.

5.5

In the Linux kernel, the following vulnerability has been resolved: x86/mtrr: Check if fixed MTRRs exist before saving them MTRRs have an obsolete fixed variant for fine grained caching control of the 640K-1MB region that uses separate MSRs. This fixed variant has a separate capability bit in the MTRR capability MSR. So far all x86 CPUs which support MTRR have this separate bit set, so it went unnoticed that mtrr_save_state() does not check the capability bit before accessing the fixed MTRR MSRs. Though on a CPU that does not support the fixed MTRR capability this results in a #GP. The #GP itself is harmless because the RDMSR fault is handled gracefully, but results in a WARN_ON(). Add the missing capability check to prevent this.

7.1

Ringer server is the server code for the Ringer messaging app. Prior to version 1.3.1, there is an issue with the messages loading route where Ringer Server does not check to ensure that the user loading the conversation is actually a member of that conversation. This allows any user with a Lif Account to load any conversation between two users without permission. This issue had been patched in version 1.3.1. There is no action required for users. Lif Platforms will update their servers with the patch.

9.8

An issue in Vypor Attack API System v.1.0 allows a remote attacker to execute arbitrary code via the user GET parameter.

7.5

A flaw was found in Aardvark-dns, which is vulnerable to a Denial of Service attack due to the serial processing of TCP DNS queries. An attacker can exploit this flaw by keeping a TCP connection open indefinitely, causing the server to become unresponsive and resulting in other DNS queries timing out. This issue prevents legitimate users from accessing DNS services, thereby disrupting normal operations and causing service downtime.

3.5

A vulnerability was determined in ABCD ABCD2 up to 2.2.0-beta-1. Impacted is an unknown function of the file /buscar_integrada.php. Executing a manipulation of the argument Sub_Expresion can lead to cross site scripting. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. The developer explains, that "this script has been completely redesigned after this version".

9.8

Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Semtek Informatics Software Consulting Inc. Semtek Sempos allows SQL Injection. This issue affects Semtek Sempos: through 31072024.

6.1

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Semtek Informatics Software Consulting Inc. Semtek Sempos allows Reflected XSS. This issue affects Semtek Sempos: through 31072024.

9.8

Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Semtek Informatics Software Consulting Inc. Semtek Sempos allows Blind SQL Injection. This issue affects Semtek Sempos: through 31072024.

N/A

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

3.9

A vulnerability was found in the pkcs15-init tool in OpenSC. An attacker could use a crafted USB Device or Smart Card, which would present the system with a specially crafted response to APDUs. When buffers are partially filled with data, initialized parts of the buffer can be incorrectly accessed.

4.3

A vulnerability was found in OpenSC, OpenSC tools, PKCS#11 module, minidriver, and CTK. An attacker could use a crafted USB Device or Smart Card, which would present the system with a specially crafted response to APDUs. When buffers are partially filled with data, initialized parts of the buffer can be incorrectly accessed.

Showing 139626-139650 of 254,664 CVEs