radar

ONE Sentinel

shield

CVE Tracker

254,664 total CVEs

Live vulnerability feed from the National Vulnerability Database

7.5

Calling Decoder.Decode on a message which contains deeply nested structures can cause a panic due to stack exhaustion. This is a follow-up to CVE-2022-30635.

4.3

Calling any of the Parse functions on Go source code which contains deeply nested literals can cause a panic due to stack exhaustion.

N/A

Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2024-45294. Reason: This candidate is a duplicate of CVE-2024-45294. Notes: All CVE users should reference CVE-2024-45294 instead of this candidate. This CVE was issued to a vulnerability that is dependent on CVE-2024-45294. According to rule 4.2.15 of the CVE CNA rules, "CNAs MUST NOT assign a different CVE ID to a Vulnerability that is fully interdependent with another Vulnerability. The Vulnerabilities are effectively the same single Vulnerability and MUST use one CVE ID."

9.8

SPIP before 4.3.2, 4.2.16, and 4.1.18 is vulnerable to a command injection issue. A remote and unauthenticated attacker can execute arbitrary operating system commands by sending a crafted multipart file upload HTTP request.

7.5

A vulnerability was found in Forklift Controller.  There is no verification against the authorization header except to ensure it uses bearer authentication. Without an Authorization header and some form of a Bearer token, a 401 error occurs. The presence of a token value provides a 200 response with the requested information.

8.6

The HL7 FHIR Core Artifacts repository provides the java core object handling code, with utilities (including validator), for the Fast Healthcare Interoperability Resources (FHIR) specification. Prior to version 6.3.23, XSLT transforms performed by various components are vulnerable to XML external entity injections. A processed XML file with a malicious DTD tag could produce XML containing data from the host system. This impacts use cases where org.hl7.fhir.core is being used to within a host where external clients can submit XML. This issue has been patched in release 6.3.23. No known workarounds are available.

5.3

Dovecot accepts dot LF DOT LF symbol as end of DATA command. RFC requires that it should always be CR LF DOT CR LF. This causes Dovecot to convert single mail with LF DOT LF in middle, into two emails when relaying to SMTP. Dovecot will split mail with LF DOT LF into two mails. Upgrade to latest released version. No publicly available exploits are known.

8.8

The ForumWP – Forum & Discussion Board Plugin plugin for WordPress is vulnerable to Privilege Escalation via Insecure Direct Object Reference in all versions up to, and including, 2.0.2 via the submit_form_handler due to missing validation on the 'user_id' user controlled key. This makes it possible for authenticated attackers, with subscriber-level access and above, to change the email address of administrative user accounts which can then be leveraged to reset the administrative users password and gain access to their account.

6.4

The Enter Addons – Ultimate Template Builder for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'tag' attribute of the Events Card widget in all versions up to, and including, 2.1.8 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

9.8

The WPCOM Member plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 1.5.2.1. This is due to the plugin allowing arbitrary data to be passed to wp_insert_user() during registration. This makes it possible for unauthenticated attackers to update their role to that of an administrator during registration.

7.5

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in DataFlowX Technology DataDiodeX allows Path Traversal. This issue affects DataDiodeX: from v3.0.0 before v3.1.7.

6.0

`gix-path` is a crate of the `gitoxide` project (an implementation of `git` written in Rust) dealing paths and their conversions. Prior to version 0.10.11, `gix-path` runs `git` to find the path of a configuration file associated with the `git` installation, but improperly resolves paths containing unusual or non-ASCII characters, in rare cases enabling a local attacker to inject configuration leading to code execution. Version 0.10.11 contains a patch for the issue. In `gix_path::env`, the underlying implementation of the `installation_config` and `installation_config_prefix` functions calls `git config -l --show-origin` to find the path of a file to treat as belonging to the `git` installation. Affected versions of `gix-path` do not pass `-z`/`--null` to cause `git` to report literal paths. Instead, to cover the occasional case that `git` outputs a quoted path, they attempt to parse the path by stripping the quotation marks. The problem is that, when a path is quoted, it may change in substantial ways beyond the concatenation of quotation marks. If not reversed, these changes can result in another valid path that is not equivalent to the original. On a single-user system, it is not possible to exploit this, unless `GIT_CONFIG_SYSTEM` and `GIT_CONFIG_GLOBAL` have been set to unusual values or Git has been installed in an unusual way. Such a scenario is not expected. Exploitation is unlikely even on a multi-user system, though it is plausible in some uncommon configurations or use cases. In general, exploitation is more likely to succeed if users are expected to install `git` themselves, and are likely to do so in predictable locations; locations where `git` is installed, whether due to usernames in their paths or otherwise, contain characters that `git` quotes by default in paths, such as non-English letters and accented letters; a custom `system`-scope configuration file is specified with the `GIT_CONFIG_SYSTEM` environment variable, and its path is in an unusual location or has strangely named components; or a `system`-scope configuration file is absent, empty, or suppressed by means other than `GIT_CONFIG_NOSYSTEM`. Currently, `gix-path` can treat a `global`-scope configuration file as belonging to the installation if no higher scope configuration file is available. This increases the likelihood of exploitation even on a system where `git` is installed system-wide in an ordinary way. However, exploitation is expected to be very difficult even under any combination of those factors.

7.5

Authorization Bypass Through User-Controlled Key, Missing Authorization vulnerability in Ariva Computer Accord ORS allows Retrieve Embedded Sensitive Data. This issue affects Accord ORS: before 7.3.2.1.

7.8

In the Linux kernel, the following vulnerability has been resolved: media: aspeed: Fix memory overwrite if timing is 1600x900 When capturing 1600x900, system could crash when system memory usage is tight. The way to reproduce this issue: 1. Use 1600x900 to display on host 2. Mount ISO through 'Virtual media' on OpenBMC's web 3. Run script as below on host to do sha continuously #!/bin/bash while [ [1] ]; do find /media -type f -printf '"%h/%f"\n' | xargs sha256sum done 4. Open KVM on OpenBMC's web The size of macro block captured is 8x8. Therefore, we should make sure the height of src-buf is 8 aligned to fix this issue.

5.9

tgt (aka Linux target framework) before 1.0.93 attempts to achieve entropy by calling rand without srand. The PRNG seed is always 1, and thus the sequence of challenges is always identical.

4.3

In OpenStack Ironic before 26.0.1 and ironic-python-agent before 9.13.1, there is a vulnerability in image processing, in which a crafted image could be used by an authenticated user to exploit undesired behaviors in qemu-img, including possible unauthorized access to potentially sensitive data. The affected/fixed version details are: Ironic: <21.4.3, >=22.0.0 <23.0.2, >=23.1.0 <24.1.2, >=25.0.0 <26.0.1; Ironic-python-agent: <9.4.2, >=9.5.0 <9.7.1, >=9.8.0 <9.11.1, >=9.12.0 <9.13.1.

9.8

An issue was discovered in Mbed TLS 3.x before 3.6.1. With TLS 1.3, when a server enables optional authentication of the client, if the client-provided certificate does not have appropriate values in if keyUsage or extKeyUsage extensions, then the return value of mbedtls_ssl_get_verify_result() would incorrectly have the MBEDTLS_X509_BADCERT_KEY_USAGE and MBEDTLS_X509_BADCERT_KEY_USAGE bits clear. As a result, an attacker that had a certificate valid for uses other than TLS client authentication would nonetheless be able to use it for TLS client authentication. Only TLS 1.3 servers were affected, and only with optional authentication (with required authentication, the handshake would be aborted with a fatal alert).

9.8

An issue was discovered in Mbed TLS 3.6 before 3.6.1. A stack buffer overflow in mbedtls_ecdsa_der_to_raw() and mbedtls_ecdsa_raw_to_der() can occur when the bits parameter is larger than the largest supported curve. In some configurations with PSA disabled, all values of bits are affected. (This never happens in internal library calls, but can affect applications that call these functions directly.)

5.1

An issue was discovered in Mbed TLS before 2.28.9 and 3.x before 3.6.1, in which the user-selected algorithm is not used. Unlike previously documented, enabling MBEDTLS_PSA_HMAC_DRBG_MD_TYPE does not cause the PSA subsystem to use HMAC_DRBG: it uses HMAC_DRBG only when MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG and MBEDTLS_CTR_DRBG_C are disabled.

4.7

An issue was discovered in Trusted Firmware-M through 2.0.0. The lack of argument verification in the logging subsystem allows attackers to read sensitive data via the login function.

5.7

The fix for CVE-2024-2199 in 389-ds-base was insufficient to cover all scenarios. In certain product versions, an authenticated user may cause a server crash while modifying `userPassword` using malformed input.

3.7

A vulnerability was found in Windmill 1.380.0. It has been classified as problematic. Affected is an unknown function of the file backend/windmill-api/src/users.rs of the component HTTP Request Handler. The manipulation leads to improper restriction of excessive authentication attempts. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. Upgrading to version 1.390.1 is able to address this issue. The patch is identified as acfe7786152f036f2476f93ab5536571514fa9e3. It is recommended to upgrade the affected component.

5.3

The Geo Controller plugin for WordPress is vulnerable to unauthorized shortcode execution due to missing authorization and capability checks on the ajax__shortcode_cache function in all versions up to, and including, 8.6.9. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes available on the target site.

4.3

The Geo Controller plugin for WordPress is vulnerable to unauthorized menu creation/deletion due to missing capability checks on the ajax__geolocate_menu and ajax__geolocate_remove_menu functions in all versions up to, and including, 8.7.3. This makes it possible for authenticated attackers, with Subscriber-level access and above, to create or delete WordPress menus.

4.4

The Cab fare calculator plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the vehicle title setting in versions up to, and including, 1.1.6 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers with administrative privileges to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled.

Showing 139576-139600 of 254,664 CVEs