radar

ONE Sentinel

shield

CVE Tracker

254,765 total CVEs

Live vulnerability feed from the National Vulnerability Database

4.7

A vulnerability was found in PAM. The secret information is stored in memory, where the attacker can trigger the victim program to execute by sending characters to its standard input (stdin). As this occurs, the attacker can train the branch predictor to execute an ROP chain speculatively. This flaw could result in leaked passwords, such as those found in /etc/shadow while performing authentications.

7.8

In the Linux kernel, the following vulnerability has been resolved: mm/mremap: fix move_normal_pmd/retract_page_tables race In mremap(), move_page_tables() looks at the type of the PMD entry and the specified address range to figure out by which method the next chunk of page table entries should be moved. At that point, the mmap_lock is held in write mode, but no rmap locks are held yet. For PMD entries that point to page tables and are fully covered by the source address range, move_pgt_entry(NORMAL_PMD, ...) is called, which first takes rmap locks, then does move_normal_pmd(). move_normal_pmd() takes the necessary page table locks at source and destination, then moves an entire page table from the source to the destination. The problem is: The rmap locks, which protect against concurrent page table removal by retract_page_tables() in the THP code, are only taken after the PMD entry has been read and it has been decided how to move it. So we can race as follows (with two processes that have mappings of the same tmpfs file that is stored on a tmpfs mount with huge=advise); note that process A accesses page tables through the MM while process B does it through the file rmap: process A process B ========= ========= mremap mremap_to move_vma move_page_tables get_old_pmd alloc_new_pmd *** PREEMPT *** madvise(MADV_COLLAPSE) do_madvise madvise_walk_vmas madvise_vma_behavior madvise_collapse hpage_collapse_scan_file collapse_file retract_page_tables i_mmap_lock_read(mapping) pmdp_collapse_flush i_mmap_unlock_read(mapping) move_pgt_entry(NORMAL_PMD, ...) take_rmap_locks move_normal_pmd drop_rmap_locks When this happens, move_normal_pmd() can end up creating bogus PMD entries in the line `pmd_populate(mm, new_pmd, pmd_pgtable(pmd))`. The effect depends on arch-specific and machine-specific details; on x86, you can end up with physical page 0 mapped as a page table, which is likely exploitable for user->kernel privilege escalation. Fix the race by letting process B recheck that the PMD still points to a page table after the rmap locks have been taken. Otherwise, we bail and let the caller fall back to the PTE-level copying path, which will then bail immediately at the pmd_none() check. Bug reachability: Reaching this bug requires that you can create shmem/file THP mappings - anonymous THP uses different code that doesn't zap stuff under rmap locks. File THP is gated on an experimental config flag (CONFIG_READ_ONLY_THP_FOR_FS), so on normal distro kernels you need shmem THP to hit this bug. As far as I know, getting shmem THP normally requires that you can mount your own tmpfs with the right mount flags, which would require creating your own user+mount namespace; though I don't know if some distros maybe enable shmem THP by default or something like that. Bug impact: This issue can likely be used for user->kernel privilege escalation when it is reachable.

7.8

Incorrect Default Permissions vulnerability in GenBroker32, which is included in the installers for Mitsubishi Electric GENESIS64 versions 10.97.3 and prior, Mitsubishi Electric Iconics Digital Solutions GENESIS64 versions 10.97.3 and prior, Mitsubishi Electric ICONICS Suite versions 10.97.3 and prior, Mitsubishi Electric Iconics Digital Solutions ICONICS Suite versions 10.97.3 and prior, Mitsubishi Electric GENESIS32 versions 9.70.300.23 and prior, Mitsubishi Electric Iconics Digital Solutions GENESIS32 versions 9.70.300.23 and prior, and Mitsubishi Electric MC Works64 all versions allows a local authenticated attacker to disclose or tamper with confidential information and data contained in the products, or cause a denial of service (DoS) condition on the products, by accessing a folder with incorrect permissions, when GenBroker32 is installed on the same PC as GENESIS64, ICONICS Suite, MC Works64, or GENESIS32.

5.3

Accounts enumeration vulnerability in the Login Component of Reolink Duo 2 WiFi Camera (Firmware Version v3.0.0.1889_23031701) allows remote attackers to determine valid user accounts via login attempts. This can lead to the enumeration of user accounts and potentially facilitate other attacks, such as brute-forcing of passwords. The vulnerability arises from the application responding differently to login attempts with valid and invalid usernames.

N/A

Rejected reason: DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate was issued in error. Notes: All references and descriptions in this candidate have been removed to prevent accidental usage.

9.8

Xlight FTP Server <3.9.4.3 has an integer overflow vulnerability in the packet parsing logic of the SFTP server, which can lead to a heap overflow with attacker-controlled content.

8.2

An arbitrary file upload vulnerability in the Ticket Generation function of Ladybird Web Solution Faveo-Helpdesk v2.0.3 allows attackers to execute arbitrary code via uploading a crafted .html or .svg file.

7.5

Incorrect Access Control in GStreamer RTSP server 1.25.0 in gst-rtsp-server/rtsp-media.c allows remote attackers to cause a denial of service via a series of specially crafted hexstream requests.

8.4

Kieback & Peter's DDC4000 series has an insufficiently protected credentials vulnerability, which may allow an unauthenticated attacker with access to /etc/passwd to read the password hashes of all users on the system.

9.8

Kieback & Peter's DDC4000 series uses weak credentials, which may allow an unauthenticated attacker to get full admin rights on the system.

7.5

Integer Overflow in fast_ping.c in SmartDNS Release46 allows remote attackers to cause a Denial of Service via misaligned memory access.

9.8

Kieback & Peter's DDC4000 series is vulnerable to a path traversal vulnerability, which may allow an unauthenticated attacker to read files on the system.

9.0

An issue in Casa Systems NTC-221 version 2.0.99.0 and before allows a remote attacker to execute arbitrary code via a crafted payload to the /www/cgi-bin/nas.cgi component.

9.2

Cursor is a code editor built for programming with AI. Prior to Sep 27, 2024, if a user generated a terminal command via Cursor's Terminal Cmd-K/Ctrl-K feature and if the user explicitly imported a malicious web page into the Terminal Cmd-K prompt, an attacker with control over the referenced web page could have a significant chance of influencing a language model to output arbitrary commands for execution in the user's terminal. This scenario would require the user explicitly opt-in to including the contents of a compromised webpage, and it would require that the attacker display prompt injection text in the the contents of the compromised webpage. A server-side patch to not stream back newlines or control characters was released on September 27, 2024, within two hours of the issue being reported. Additionally, Cursor 0.42 includes client-side mitigations to prevent any newline or control character from being streamed into the terminal directly. It also contains a new setting, `"cursor.terminal.usePreviewBox"`, which, if set to true, streams the response into a preview box whose contents then have to be manually accepted before being inserted into the terminal. This setting is useful if you're working in a shell environment where commands can be executed without pressing enter or any control character. The patch has been applied server-side, so no additional action is needed, even on older versions of Cursor. Separately, Cursor's maintainers also recommend, as best practice, to only include trusted pieces of context in prompts.

5.3

An issue was discovered in OPC Foundation OPCFoundation/UA-.NETStandard through 1.5.374.78. A remote attacker can send requests with invalid credentials and cause the server performance to degrade gradually.

5.2

A vulnerability in Jamf Pro's Jamf Remote Assist tool allows a local, non-privileged user to escalate their privileges to root on MacOS systems.

7.8

A vulnerability has been found in the CPython `venv` module and CLI where path names provided when creating a virtual environment were not quoted properly, allowing the creator to inject commands into virtual environment "activation" scripts (ie "source venv/bin/activate"). This means that attacker-controlled virtual environments are able to run commands when the virtual environment is activated. Virtual environments which are not created by an attacker or which aren't activated before being used (ie "./venv/bin/python") are not affected.

9.3

In versions of Zend Server 8.5 and prior to version 9.2 a format string injection was discovered. Reported by Dylan Marino

8.8

The workflow component in Liferay Portal 7.3.2 through 7.4.3.111, and Liferay DXP 2023.Q4.0 through 2023.Q4.5, 2023.Q3.1 through 2023.Q3.8, 7.4 GA through update 92 and 7.3 GA through update 36 does not properly check user permissions before updating a workflow definition, which allows remote non-authenticated users to modify workflow definitions and execute arbitrary code (RCE) via the headless API.

5.3

A vulnerability was found in GraphQL due to improper access controls on the GraphQL introspection query. This flaw allows unauthorized users to retrieve a comprehensive list of available queries and mutations. Exposure to this flaw increases the attack surface, as it can facilitate the discovery of flaws or errors specific to the application's GraphQL implementation.

6.1

A vulnerability was found in Wildfly, where a user may perform Cross-site scripting in the Wildfly deployment system. This flaw allows an attacker or insider to execute a deployment with a malicious payload, which could trigger undesired behavior against the server.

7.8

A flaw was found in the libreswan client plugin for NetworkManager (NetkworkManager-libreswan), where it fails to properly sanitize the VPN configuration from the local unprivileged user. In this configuration, composed by a key-value format, the plugin fails to escape special characters, leading the application to interpret values as keys. One of the most critical parameters that could be abused by a malicious user is the `leftupdown`key. This key takes an executable command as a value and is used to specify what executes as a callback in NetworkManager-libreswan to retrieve configuration settings back to NetworkManager. As NetworkManager uses Polkit to allow an unprivileged user to control the system's network configuration, a malicious actor could achieve local privilege escalation and potential code execution as root in the targeted machine by creating a malicious configuration.

7.5

The AWS ALB Route Directive Adapter For Istio repo https://github.com/awslabs/aws-alb-route-directive-adapter-for-istio/tree/master provides an OIDC authentication mechanism that was integrated into the open source Kubeflow project. The adapter uses JWT for authentication, but lacks proper signer and issuer validation. In deployments of ALB that ignore security best practices, where ALB targets are directly exposed to internet traffic, an actor can provide a JWT signed by an untrusted entity in order to spoof OIDC-federated sessions and successfully bypass authentication. The repository/package has been deprecated, is end of life, and is no longer supported. As a security best practice, ensure that your ELB targets (e.g. EC2 Instances, Fargate Tasks etc.) do not have public IP addresses. Ensure any forked or derivative code validate that the signer attribute in the JWT match the ARN of the Application Load Balancer that the service is configured to use.

7.5

The Amazon.ApplicationLoadBalancer.Identity.AspNetCore repo https://github.com/awslabs/aws-alb-identity-aspnetcore#validatetokensignature contains Middleware that can be used in conjunction with the Application Load Balancer (ALB) OpenId Connect integration and can be used in any ASP.NET https://dotnet.microsoft.com/apps/aspnet Core deployment scenario, including Fargate, EKS, ECS, EC2, and Lambda. In the JWT handling code, it performs signature validation but fails to validate the JWT issuer and signer identity. The signer omission, if combined with a scenario where the infrastructure owner allows internet traffic to the ALB targets (not a recommended configuration), can allow for JWT signing by an untrusted entity and an actor may be able to mimic valid OIDC-federated sessions to the ALB targets. The repository/package has been deprecated, is end of life, and is no longer supported. As a security best practice, ensure that your ELB targets (e.g. EC2 Instances, Fargate Tasks etc.) do not have public IP addresses. Ensure any forked or derivative code validate that the signer attribute in the JWT match the ARN of the Application Load Balancer that the service is configured to use.

9.1

A vulnerability in the NuPoint Unified Messaging (NPM) component of Mitel MiCollab through 9.8 SP1 FP2 (9.8.1.201) could allow an unauthenticated attacker to conduct a path traversal attack, due to insufficient input validation. A successful exploit could allow unauthorized access, enabling the attacker to view, corrupt, or delete users' data and system configurations.

Showing 138001-138025 of 254,765 CVEs