PJSIP is a free and open source multimedia communication library written in C. Prior to commit a1b707c, a stack buffer overflow exists in the SRTP/SDES media transport when processing a=crypto attributes during SDP offer/answer (sdes_encode_sdp() in transport_srtp_sdes.c). This affects applications with SRTP enabled (use_srtp optional or mandatory, using SDES keying). During media negotiation, the crypto attributes from the remote SDP are collected into a fixed-size array without bounding their number; a remote peer that includes an excessive number of a=crypto attributes in a single media description can write past the end of that array on the stack. This is reachable from an incoming SIP INVITE during offer/answer, before application-level authentication. Impact may range from unexpected application termination to control flow hijack/memory corruption. Applications that do not enable SRTP are not affected. This issue has been patched via commit a1b707c.

PJSIP is a free and open source multimedia communication library written in C. Prior to commit acc03b5, a stack buffer overflow exists in PJSUA when processing Service-Route headers in a registration response (update_service_route() in pjsua_acc.c). This affects applications that register using the PJSUA/PJSUA2 account API (the default registration path). The Service-Route URIs from a 2xx response to REGISTER are stored into a fixed-size array without bounding the number of headers; a registrar that returns an excessive number of Service-Route headers can write past the end of the array on the stack. The values written are internal pointers rather than arbitrary data, so the most likely impact is unexpected application termination (denial of service), though memory corruption cannot be excluded. The malicious response may come from a compromised or malicious registrar, or — over unprotected transports — a spoofed response. This issue has been patched via commit acc03b5.

PJSIP is a free and open source multimedia communication library written in C. Prior to commit d6a0e7f, a buffer overflow can occur in pjsip_generic_array_hdr_print() in pjsip/src/pjsip/sip_msg.c, the function that serializes generic array headers (such as Allow, Require, Supported, and Unsupported). Under certain output-buffer boundary conditions the function can write one byte past the end of the buffer. This is reachable mainly in applications that parse and re-serialize incoming SIP requests — for example a proxy, SBC, or B2BUA — where a remote peer can influence the serialized message. The out-of-bounds write is a single fixed byte; code execution and information disclosure are not demonstrated, and in typical pool-based allocations the byte falls within allocation slack. This issue has been patched via commit d6a0e7f.

PJSIP is a free and open source multimedia communication library written in C. Prior to commit 673b978, a remote out-of-bounds read and write can occur in the SDP negotiator when the remote payload-type map maintenance feature is enabled. assign_pt_and_update_map() in pjmedia/src/pjmedia/sdp_neg.c uses payload-type numbers taken from a remote SDP offer or answer to index fixed-size internal tables without sufficient bounds validation, so a crafted remote SDP can cause memory access outside those tables. The practical impact is memory corruption and denial of service; code execution is not demonstrated. This path is only reached when PJMEDIA_SDP_NEG_MAINTAIN_REMOTE_PT_MAP is enabled. The default is disabled, so default builds are not affected; the feature is an interoperability option that integrating products may enable. This issue has been patched via commit 673b978.

Frappe CRM is an open-source customer relationship management tool. Prior to version 1.73.0, there is an authentication bypass vulnerability via logged invitation keys in crm/api. This issue has been patched in version 1.73.0.

Admidio is an open-source user management solution. In versions 5.0.11 and prior, the modules/plugins.php endpoint handles plugin installation, uninstallation, and update operations via GET requests without CSRF token validation. Because these are top-level navigations, browsers include SameSite=Lax session cookies. An attacker crafts a malicious page that, when an authenticated administrator visits it, triggers arbitrary plugin operations. The uninstall operation executes DROP TABLE SQL scripts and destroys plugin data. This issue has been patched via commit 056b1bd.

Emlog is an open source website building system. In versions 2.6.29 and prior, article content is processed by Parsedown without enabling safe mode, which means raw HTML including <script> tags embedded in Markdown is passed through unescaped. The output is rendered with no additional sanitization, resulting in stored XSS visible to all site visitors. At time of publication, there are no publicly known patches.

Emlog is an open source website building system. In versions 2.6.29 and prior, the emUnZip() function extracts all ZIP entries via ZipArchive::extractTo() without validating entry paths for ../ traversal sequences. Only the first entry's subdirectory structure is checked. An attacker can overwrite arbitrary files on the server filesystem, including config.php for immediate RCE. At time of publication, there are no publicly known patches.

Emlog is an open source website building system. Prior to version 2.6.16, Emlog CMS Pro contains a blind SQL injection in User_Model::getUserDataByLogin(). The $account parameter is directly interpolated into SQL queries without any filtering. The vulnerability is reachable through the auth cookie validation path, where $username is extracted from the cookie and passed unfiltered into SQL — guarded only by an HMAC signature that requires AUTH_KEY to forge. This issue has been patched in version 2.6.16.

Note Mark is an open-source note-taking application. Prior to version 0.19.5, Note Mark validates book and note slug values with the OpenAPI/huma tag pattern:"[a-z0-9-]+". huma compiles this with regexp.MustCompile(s.Pattern) and tests it with patternRe.MatchString(str), an UNANCHORED match. Because the pattern is not anchored (^...$), any string that merely CONTAINS one [a-z0-9-] substring passes validation. A slug such as ../../../../../../tmp/escape is accepted and stored verbatim. The data-export CLI commands (note-mark migrate export and note-mark migrate export-v1) join these unsanitized slugs straight into the output path with path.Join / filepath.Join, then os.MkdirAll the directory and os.Create the note file. path.Join resolves the ../ segments, so the note content file is written OUTSIDE the configured export directory. The export process commonly runs as root (default in Docker / bare-metal admin usage), so this is a root-privilege arbitrary directory create + file write. This issue has been patched in version 0.19.5.

undici's WebSocket client crashes the whole Node.js process during the opening handshake when a server responds with a subprotocol that the client never requested. A default WebSocket connection sends no subprotocol, but if the server's 101 response includes a Sec-WebSocket-Protocol header, undici dereferences a null value while checking it against the requested list and throws an uncaught TypeError. Because that code runs inside a microtask with no surrounding error handling, the exception propagates and terminates the process under Node's default behavior, instead of gracefully failing the connection as required by the WebSocket protocol. Any application that opens a WebSocket to an attacker-controlled or compromised server, or over a plaintext connection subject to a machine-in-the-middle, can be crashed remotely without authentication in the default configuration. This affects undici versions from 6.7.0 up to 6.28.1, from 7.0.0 up to 7.29.1, and from 8.0.0 up to 8.10.2. Users should upgrade to undici 6.28.1, 7.29.1, or 8.10.2.

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

undici's retry interceptor can append the body of a ranged retry response to bytes already delivered from an earlier partial response while still presenting the original response's status and headers. This happens when an upstream server delivers part of a body without a trustworthy resume checkpoint, for example a non-success response whose headers were already sent or a partial-content response with an unusable content range, then closes the connection and answers the resumed range request with more bytes. As a result the response body can be longer than the Content-Length that the application observes. An application that relays such a response to a downstream HTTP/1.1 peer without normalizing the framing can emit a body that exceeds the forwarded Content-Length, and the excess bytes can be interpreted as the start of a following response, which enables downstream response splitting or desynchronization. Exploitation requires an attacker-controlled upstream server and an application that forwards the response through a framing-sensitive path. This affects undici versions before 6.28.1, from 7.0.0 up to 7.29.1, and from 8.0.0 up to 8.10.2. Users should upgrade to undici 6.28.1, 7.29.1, or 8.10.2.

undici's retry handler can leave an already-exposed response body pending forever. When a server returns a successful response that declares a Content-Length, sends only part of the body, and closes the connection, the retry handler retries the request. If the retry returns a non-retryable status such as 400, the handler forwards that new response downstream and replaces its internal response stream, but the original response body that the application still holds is never ended or destroyed. As a result calls that read that body never settle, and the configured body timeout does not fire because its timer is tied to the connection parser rather than the orphaned body. An attacker-controlled server can trigger this with two short responses without keeping a connection open, and repeated requests accumulate pending promises and streams that can exhaust application concurrency or memory. This affects undici versions from 7.11.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2.

Parrot AR.Drone version 1 and 2 does not employ a suitable mechanism to prevent denial-of-service (DoS) attacks. An attacker can harm the device availability (i.e., video streaming and control) by using tool to perform an IPv4 flood attack. Verified attacks includes SYN flooding and UDP flooding.

Parrot AR.Drone 1 and AR.Drone 2 are vulnerable to Denial of Service. The Parrot AR.Drone platform is vulnerable to Wi-Fi deauthentication attack, allowing remote and unauthenticated attackers to disconnect drone from controller during mid-flight.

undici 8.10.0 omits the destination origin from the cache and request-deduplication keys when the cache or deduplicate interceptor is composed directly onto a Client or Pool. Because the internal cache key falls back to an empty origin string, a cacheable or in-flight response from one upstream origin is returned for a request to a different, trusted origin whenever the method, path, and relevant headers match, which permits cross-origin information disclosure and persistent cache poisoning. The reporter demonstrated a full authentication bypass in which a JWT signed with an attacker-controlled key was accepted as belonging to a trusted issuer, and the trusted origin was never contacted. This is a regression introduced in 8.10.0 and affects undici versions from 8.10.0 up to 8.10.2. Applications using an Agent, which carries the origin in its dispatch options, are not affected. Users should upgrade to undici 8.10.2.

undici bundles a WebSocket client whose permessage-deflate size-limit cleanup removes all listeners from the internal zlib inflate stream, including its error listener, while that stream can still emit. When a remote peer sends a compressed payload that crosses the built-in 128 MiB decompressed-payload limit and then contains a malformed DEFLATE byte, the inflate stream emits a data error with no listener attached, which Node.js treats as a fatal unhandled error and terminates the entire process. Exploitation is remote and unauthenticated, requires no application mistake, and is asymmetric, since roughly 130 KB on the wire expands past the limit and crashes the process, and reconnecting can repeat the crash. This affects undici versions from 6.25.0 up to 6.28.1, from 7.28.0 up to 7.29.1, and from 8.1.0 up to 8.10.2. Users should upgrade to undici 6.28.1, 7.29.1, or 8.10.2.

undici's experimental WebSocketStream client crashes the whole Node.js process when a remote peer closes the TCP connection without a WebSocket close handshake. On an unclean close the internal socket-close handler calls abort on the writable stream unconditionally and discards the returned promise, but per the WHATWG Streams standard aborting a locked writable returns a promise that rejects with a TypeError. Because the application holds a writer on that writable, which is the only way to write, the rejection is never observed and Node's default unhandled-rejection behavior terminates the process. An untrusted server can therefore crash a client with a single abrupt disconnect, with no authentication and no application mistake. This affects undici versions from 7.0.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2.

undici's cache interceptor documents that only safe HTTP methods are cached, but its logic to skip caching is built by subtracting the configured methods from the set of safe methods, so an unsafe method such as POST, PUT, or DELETE is never placed in the skip list and instead falls through to the full cache-read path. The response-storage gate also lacked a method check, so a response to an unsafe request that is heuristically cacheable or carries an explicit Cache-Control directive is stored and later replayed from cache. Because response headers from a remote origin are untrusted, an origin can answer once with a cacheable status and then have the client's own subsequent state-changing requests to that path served from the stale cache entry without ever reaching the origin, an integrity failure that occurs under the interceptor's default configuration. This affects undici versions from 7.0.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2.

undici's BalancedPool constructor passes its entire options object through an internal deep-clone that serializes and reparses the value as JSON. Because JSON cannot represent functions, any function-valued TLS option, such as a caller-supplied checkServerIdentity callback or a custom connector inside the connect option, is silently discarded before it reaches the TLS layer. As a result a peer whose certificate the application's custom checkServerIdentity was written to reject, but which still passes Node's default hostname and chain checks, is accepted when reached through BalancedPool. The Client, Pool, and Agent dispatchers are not affected because they extract the connect and tls options before cloning. This affects undici versions from 7.24.1 up to 7.29.1 and from 8.0.0 up to 8.10.2, and only when the application supplies a function-valued connect or tls option to BalancedPool. Users should upgrade to undici 7.29.1 or 8.10.2.

undici's dump interceptor reads and discards a response body up to a configurable maximum size. When a response declares a Content-Length that exceeds the maximum, the interceptor aborts cleanly, but when a response has no Content-Length and is chunked, the interceptor instead signals completion early once the accumulated size reaches the maximum, without pausing or aborting the request. Because the underlying parser keeps delivering body bytes, a second completion signal fires and trips an internal assertion, which aborts the request and tears down the connection. The application is left observing a misleading successful status with an empty or truncated body while the connection has actually been disconnected. This affects undici versions from 7.1.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2.

undici's cache interceptor does not handle the Set-Cookie response header anywhere in its cache path, so it neither refuses to store nor strips that header. In shared cache mode, which is the default, an otherwise cacheable response that carries a Set-Cookie header, for example one marked with a public and max-age directive, is stored and then re-served to a later caller that matches the same cache key. As a result one caller's cookie is disclosed to a different caller, and an untrusted server can inject cookies into cached responses served to all subsequent callers. This violates the requirement that a shared cache must not store cookies. This affects undici versions from 7.0.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2.

In the Linux kernel, the following vulnerability has been resolved: serial: msm: Disable DMA for kernel console UART At the moment, concurrent writes from userspace and the kernel to the console can trigger a race condition that results in an infinite loop of the same messages printed over and over again. This is most likely to happen during system startup or shutdown when the init system starts/stops a large number of system services that interact with various kernel code. When userspace writes to the TTY device, the driver initiates an asynchronous DMA transfer and releases the port lock. At the same moment, the kernel printk path might grab the port lock and re-configure the UART controller for PIO, without waiting for the DMA operation to complete. It seems like this collision results in zero progress being reported for the DMA engine, so the same text is printed to the console over and over again. For the kernel console, we want a reliable output path that will be functional even during crashes etc. So rather than implementing complex code to synchronize the kernel console write routines with the userspace DMA write routines, simply disable DMA for the console UART instance. Similar checks exist in many other serial drivers, e.g. 8250_port.c, imx.c, sh-sci.c etc.

In the Linux kernel, the following vulnerability has been resolved: afs: Fix uncancelled rxrpc OOB message handler Fix AFS to cancel its OOB message processing (typically to respond to security challenges). Also move OOB message processing to afs_wq so that it's also waited for and make the OOB handler just return if the net namespace is no longer live.