NoMachine Named Pipe Incorrect Permission Assignment Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of NoMachine. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the NoMachine Device Service. The issue results from incorrect permissions on a named pipe. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-31213.

GStreamer rtpL16depay Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the processing of RTP payload elements. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-31143.

A flaw was found in multicluster-global-hub-operator-bundle. The operator is configured with overly broad role-based access control (RBAC) permissions that grant cluster-wide impersonation of arbitrary users, groups, and service accounts without restriction. An attacker who compromises the operator or obtains its service account credentials can exploit this flaw to achieve privilege escalation, gaining full administrative control over the cluster.

When package management is enabled, Pulsar Functions, Sources and Sinks can be registered or updated from a package stored in the Pulsar Packages Management Service by supplying a package URL. The Pulsar Functions worker authorized these requests only against the namespace in which the component was being registered or updated. It did not check whether the requesting user was permitted to access packages in the namespace that the package URL refers to, and it retrieved the package from the broker using the worker's own credentials. The permission check of the Packages Management Service was therefore applied to the worker's identity instead of the requesting user's. Package URLs of transform functions supplied when registering or updating a sink were handled in the same way. An authenticated user who is permitted to register or update functions, sources or sinks in any namespace of their own tenant could use this to obtain the contents of a package stored in a namespace of another tenant, without having the packages permission on that namespace. The impact is limited to disclosure of package contents, which may include application code, business logic or embedded credentials. The issue does not allow packages to be modified or deleted and does not affect availability. This issue only affects deployments that have authentication and authorization enabled and in which package management has been enabled: the broker setting enablePackagesManagement and, in current releases, the functions worker setting functionsWorkerEnablePackageManagement. Both settings are disabled by default. This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14, from 4.1.0 through 4.1.3, and from 4.2.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

The Apache Pulsar WebSocket service allows a WebSocket consumer to configure a dead letter policy through query parameters of the consumer endpoint, including the deadLetterTopic parameter that names the topic to which messages are written after the maximum number of redeliveries is exceeded. When authorization is enabled, the WebSocket service checks only that the connecting user holds the CONSUME permission on the subscribed topic. It does not check whether the user holds the PRODUCE permission on the topic named in deadLetterTopic. The dead letter messages are then written by the WebSocket service using its own broker client identity rather than the identity of the connecting user. As a result, an authenticated user who holds the CONSUME permission on at least one topic can cause messages to be written to a topic of their choosing in any existing namespace, including namespaces belonging to other tenants, provided the role used by the WebSocket service to connect to the brokers is authorized to produce to that topic and the topic accepts a producer that registers no schema. The dead letter producer created by the WebSocket service registers no schema, so it is rejected when the target topic has a schema and schema validation is enforced for that topic or its namespace; this setting is not enabled by default. The same user is refused when attempting to produce to that topic directly. Where automatic topic creation is enabled, which is the default, the named topic is created if it does not already exist. The issue can only be triggered when the WebSocket service is enabled, either in the broker (webSocketServiceEnabled, which is disabled by default) or as a standalone WebSocket proxy. The impact is unauthorized injection of messages into topics the user is not permitted to produce to. The user can determine the content of the injected messages when they also control the messages on the subscribed topic. The issue does not allow reading, modifying or deleting existing messages in the target topic. Injected messages carry the dead letter message properties and a dead letter producer name, so they can be distinguished from messages produced normally; however, the values of these properties are not authenticated and should not be relied upon to establish the origin of a message. Whether an injected message has further consequences depends on how the applications consuming the target topic process it. Repeated injection also consumes storage and backlog capacity in the target namespace. This issue affects Apache Pulsar versions from 2.3.0 before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users who cannot upgrade immediately and do not require the WebSocket service should disable it. Where the WebSocket service is required, restricting network access to it and limiting the permissions granted to the role the WebSocket service uses to connect to the brokers to the namespaces WebSocket clients are intended to access reduces the exposure.

The Pulsar broker serves two schema commands on its binary protocol: GetSchema, which returns the schema registered for a topic, and GetOrCreateSchema, which registers a new schema version for an existing topic. The broker handled both commands after checking only that the client connection was authenticated. Unlike the broker's other topic commands, such as those for creating producers and consumers or for looking up topics, these two commands did not check whether the authenticated client was authorized for the target topic. The Pulsar REST API endpoints for schemas were not affected. An authenticated client without any permission on the target topic, namespace or tenant could use these commands to: - read the schema registered for a topic in another namespace or tenant, disclosing the schema definition such as record field names and types. Message payloads are not disclosed. - register a new schema version on an existing topic in another namespace or tenant. The topic's schema compatibility and schema auto-update policies still apply. The issue does not allow message data to be read or modified, but a registered schema version can cause legitimate producers and consumers of that topic to fail with schema incompatibility errors until the schema is corrected by an administrator. The standard Pulsar client performs an authorized topic lookup before it sends these commands, so the missing check could not be observed when testing with the standard client. A client that implements the binary protocol directly is not required to perform that lookup first. This issue is relevant only to deployments that have authentication and authorization enabled. The GetSchema command is affected from Apache Pulsar 2.2.0, and the GetOrCreateSchema command from Apache Pulsar 2.5.0. After the fix, the broker requires the lookup permission on the topic for GetSchema and the produce permission on the topic for GetOrCreateSchema. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be slightly different. This issue affects Apache Pulsar versions from 2.2.0 before 4.0.14, from 4.1.0 through 4.1.3, and from 4.2.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

Apache Pulsar's MultiRolesTokenAuthorizationProvider authorizes a client with all roles listed in a claim of its JSON Web Token (JWT). The provider is intended for use with token authentication, which verifies the token before authorization. The provider did not verify the token itself: it parsed the token's claims with the signature removed and trusted that authentication had already checked it. When authentication and authorization are enabled with a non-empty anonymousUserRole setting, some HTTP requests whose credentials fail authentication are not rejected, but are handled as requests of the anonymous user role. For the broker's HTTP endpoints, such as the admin REST API, this fallback applies to requests that do not name an authentication method and requires strictAuthMethod to be false (the default) where that setting is available. For the WebSocket API, failed credentials can also fall back to the anonymous user role; this path does not enforce strictAuthMethod. The authentication data kept for such a request still contained the request's Authorization header. MultiRolesTokenAuthorizationProvider then read the bearer token from that header without verifying its signature and authorized the request with the roles in the token's role claim. As a result, in deployments that use MultiRolesTokenAuthorizationProvider together with a non-empty anonymousUserRole and that permit this fallback, an unauthenticated client can send an HTTP request, for example to the admin REST API or the WebSocket API, with a forged or unsigned token that lists arbitrary roles, and be authorized with those roles. The impact can include super-user access when the token lists a role configured in superUserRoles, allowing the client to read and change tenants, namespaces, topics, permissions and broker configuration. No valid credentials are required. Deployments are not affected if they use the default authorization provider (PulsarAuthorizationProvider) or another authorization provider, or if anonymousUserRole is not set (the default). Requests that authenticate successfully with a valid token are not affected, because the token that MultiRolesTokenAuthorizationProvider reads is the token that authentication verified. Connections that use the Pulsar binary protocol are not affected by this issue, because the broker does not keep client authentication data for connections that it assigns to the anonymous user role. In fixed versions, MultiRolesTokenAuthorizationProvider obtains roles only from tokens that the configured token authentication provider has verified, using its configured keys and validation settings. Broker HTTP requests that are assigned to the anonymous user role are authorized only as that role, and invalid tokens cannot supply additional roles to WebSocket requests. The broker fails to start if MultiRolesTokenAuthorizationProvider is configured with authorization enabled but without a token authentication provider. This issue affects Apache Pulsar versions from 2.8.1 before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users who cannot upgrade immediately can remove the anonymousUserRole setting from the broker and WebSocket service configurations, or restrict network access to the HTTP endpoints of these services to trusted clients.

A vulnerability in the control channel socket implementation of Open Source Snort 3 could allow an authenticated, local attacker with low privileges to execute arbitrary commands as the Snort 3 process user. This vulnerability is due to a lack of authentication when a local user connects to the Snort control channel socket. An attacker could exploit this vulnerability by connecting to the Snort 3 control channel socket as a local user. A successful exploit could allow the attacker to execute arbitrary commands as well as read and write Snort 3 process memory.

A vulnerability in the IPv4 packet processing functionality of Cisco IOS XR Software that affects Cisco ASR 9000 and 9900 Series Aggregation Services Routers as well as Cisco ASR 9902 and 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause network processor (NP) errors, resulting in a line card reset or shutdown and a denial of service (DoS) condition.  This vulnerability is due to the incorrect handling of crafted IPv4 packets that are received on an affected line card interface and processed as for-us traffic. The issue can result in an NP reset, causing traffic loss on the affected line card while it recovers. Under repeated reset conditions, the network processor may enter a persistent shutdown state, in which case an explicit line card reload may be required to restore traffic. The vulnerability is within the IPv4 packet-processing path. Transit IPv4 traffic does not trigger this issue and IPv6 traffic cannot trigger it.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.   The vulnerabilities tracked by CVE-2026-76497 are related to issues concerning insecure temporary files that are grouped under the Common Weakness Enumeration (CWE) Base CWE-377.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.   The vulnerabilities tracked by CVE-2026-76496 are related to issues concerning improper link resolutions that are grouped under the Common Weakness Enumeration (CWE) Base CWE-59.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.   The vulnerabilities tracked by CVE-2026-76495 are related to issues concerning incorrect permission assignments that are grouped under the Common Weakness Enumeration (CWE) Variant CWE-732.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.   The vulnerabilities tracked by CVE-2026-76494 are related to issues concerning code injections that are grouped under the Common Weakness Enumeration (CWE) Base CWE-94.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.   The vulnerabilities tracked by CVE-2026-76493 are related to issues concerning uncaught exceptions that are grouped under the Common Weakness Enumeration (CWE) Base CWE-248.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.   The vulnerabilities tracked by CVE-2026-76492 are related to issues concerning null pointers that are grouped under the Common Weakness Enumeration (CWE) Base CWE-476.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.   The vulnerabilities tracked by CVE-2026-76491 are related to issues concerning reachable assertions that are grouped under the Common Weakness Enumeration (CWE) Base CWE-617.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.   The vulnerabilities tracked by CVE-2026-76490 are related to issues concerning out-of-bounds writes that are grouped under the Common Weakness Enumeration (CWE) Base CWE-787.

Multiple Cisco products are affected by a vulnerability in the memory management implementation of Snort 3 that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection. This vulnerability is due to incomplete error checking when Snort 3 processes files, which could cause unreleased memory. An attacker could exploit this vulnerability by sending a large number of files to be processed. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to restart unexpectedly, resulting in a DoS condition.

A vulnerability in Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an unauthenticated, remote attacker to conduct access control bypass attacks on an affected device. This vulnerability is due to improper input validation for specific HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to access parts of the network that are beyond the scope of their intended access.

As part of Cisco's ongoing commitment to proactive security and product quality, engineering teams for Cisco Emergency Responder, Cisco Prime Collaboration Deployment, Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection have conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76481 are related to issues concerning improper handling of exceptional conditions that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-703.

As part of Cisco's ongoing commitment to proactive security and product quality, engineering teams for Cisco Emergency Responder, Cisco Prime Collaboration Deployment, Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection have conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76479 are related to issues concerning improper limitation of a pathname to a restricted directory that are grouped under the Common Weakness Enumeration (CWE) Base CWE-22.

As part of Cisco's ongoing commitment to proactive security and product quality, engineering teams for Cisco Emergency Responder, Cisco Prime Collaboration Deployment, Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection have conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76478 are related to improper access control issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-284.

As part of Cisco's ongoing commitment to proactive security and product quality, engineering teams for Cisco Emergency Responder, Cisco Prime Collaboration Deployment, Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection have conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76477 are related to issues concerning improper neutralization of special elements used in an SQL command that are grouped under the Common Weakness Enumeration (CWE) Base CWE-89.

As part of Cisco's ongoing commitment to proactive security and product quality, engineering teams for Cisco Emergency Responder, Cisco Prime Collaboration Deployment, Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection have conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.   The vulnerabilities tracked by CVE-2026-76476 are related to issues concerning improper input validation that are grouped under the Common Weakness Enumeration (CWE) Class CWE-20.

As part of Cisco's ongoing commitment to proactive security and product quality, engineering teams for Cisco Emergency Responder, Cisco Prime Collaboration Deployment, Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection have conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76475 are related to issues concerning improper neutralization of input during web page generation that are grouped under the Common Weakness Enumeration (CWE) Base CWE-79.